SPECIAL REPAIR TO CATTLE FENCING AROUND AIRFIELD AREA, PROVN OF PATIENT WAITING AREA AT SMC AND RAMP FOR LOADING OFFLOADING SERVICE VEHICLE AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

NOTES :- In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly.

Demolition of brick or stone/ boulder built in cement mortar complete all as specified and as directed.

Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc Complete all as specified and as directed

M & L Pre-cast cement concrete block masonry (1:3:6 type C-1 using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width set in CM 1:4, etc complete all as specified and as directed

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M & L Prep of new plastered surface and applying two coats of white wash complete all as specified and directed

Dismantiling of mild steel work of any description not other wise provided for completed all as specified and as directed.

S&F MS Angle/ flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bars, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 completed all as specified and as directed

Dismantling expanded metal, chain link fencing or mesh any type or thickness, fixed with steel or wood fillets, if any completed all as specified and as directed

Dismantling fencing post/struts (steel/ RCC/wooden) of any section including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground Complete all as specified and as directed

Material & labour for MS angle iron conforming to Fe- 290(Gde E 165) as in fencing post Complete all as specified and as directed

M&L for Two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface Complete all as specified and as directed

Excavating in post holes in hard/dense soil not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed

Material & labour for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed

Supply only Chain link of MS galvanised fencing any size or type Complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed

Material & labour for Mild steel round bars 10 mm dia and over, cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement.

Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed

Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm Complete all as specified and as directed

Excavating over areas, n exc 1.5 m deep and getting out in hard /dense soil complete all as specified and directed

M & L Cement concrete type D2 (1:4:8) using 40mm grade stone aggregate in foundations, filling and mass concrete complete all as specified and directed

Removing excavated material/soils / Debris to a distance exc. 500 mtrs and not exc.1500 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte for flat rough finished of concrete surface complete all as specified and directed

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square/rectangular or polygon rough finished concrete surface complete all as specified and directed

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished concrete surface complete all as specified and directed

M & L Formwork to soffits of suspended slabs such as roof slabs, chajjas floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough finished concrete surface complete all as specified and directed

M & L RCC (design mix) in M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M & L RCC (design mix) in M-25 in Columns, pillars, piers,posts and struts complete all as specified and directed

M & L RCC (design mix) in M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M & L RCC (design mix) in M-25 in Chajjas complete all as specified and directed

M & L RCC (design mix) in M-25 in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

All as per item No. 34 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

Spreading and levelling in layers n exc. 25 cm thick andfor well ramming including watering as required complete all as specified and directed

M & L ATT on top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L ATT on the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M & L Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L Cement concrete type C-2 (1:3:6) (40mm graded aggragate) in foundations, filling and mass concretecomplete all as specified and directed

M & L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) for floor complete all as specified and directed

M & L Virified Ceramic double charged/ultra charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note :- Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile OR use of PVC beading for the same and the cost is included in the rate quoted above

M & L Virified Ceramic double charged/ultra charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Daddo/Skirting etc.over 10mm thick rendering coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L Non - skid coloured Ceramic tiles (300mm x 300mm) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L Glazed digital coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Rendering 15mm thick in CM 1:4 mixed with WPC on fair face of brick or block work or on concrete surfaces on external walls finished even and smooth without using extra cement complete all as specified and directed

Rendering 10mm thick in CM 1:6 on fair face of brick or block work or on concrete surfaces on internal walls finished even and smooth without using extra cement complete all as specified and directed

Rendering 5mm thick in CM 1:3 on ceilings finished even and smooth without using extra cement complete all as specified and directed

Supply only water proofing compound

M & L for 3mm thick wall care putty on walls complete all as specified and directed

Preparing new plastered surfaces on walls and applying two coats of oil bound distemper complete all as specified

M & L for Preparing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified

Providing & fixing false ceiling with semi perforated 12mm thick with micro tegular edged GRP false ceiling tiles at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of EIC (Cost of frame work and suspended wire is included in abvoe rate) (Cost of frame work and suspended wire is included in above rate)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screw s etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M & L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S & F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pan complete all as specified and directed

S & F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

S & F 30mm thick Flush shutters, solid coreconstruction, with particle board face panels, decoravitive veenered on both sides complete all as specified and directed

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F 100mm butt hingesmedium weight,

S & F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed

S & F 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed

S & F 110mm dia bore PVC (SWR) bends any radius

S & F 75mm dia bore PVC (SWR) bends any radius

S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Supply and fix 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and directed

S& F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supplying and laying 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe all as specified and directed.

S & F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete in repairs all as specified and directed

M & L for 20 mm thick Granite (of any type) machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S&F in counter top wash hand basin oval shaped 550x430x195mm with all fittings as waste coupling , CP bottle trap,waste pipe PVC connection etc complete all as specified and directed. Make: Parryware , Johnson, CERA or equivalent

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F 32mm dia waste pipe fitting to basins/urinals etc complete all as specified and directed

S&F Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.

S&F 15 mm bore pillar taps sawn neck cast copper alloy,with capstan heads, chromium plated,screwed down, fancy type high pressure complete all as specified and as directed.

S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long above WHB.

S&F Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed all as specified and as directed.

M&L for 75 mm thick cement concrete tyoe C2 (1:3:6) (using 20mm graded aggregate) as in plinth protection in alternate bays not more than 3.0 mtr length with joints between panels is 12mm wide will be filled with1 part of heated bitumen 85/25 grade and 3 parts of sand complete all as specified and directed.

M & L Brushing neat cement slurry with 3.0 kg of cement per square metre on concrete surfaces.

Material and labour 40mm average thick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for treatment and cleaning the concrete surface thoroughly by wire brush,air blower to remove loose mortar,dust,treat all visible cracks by making V groove,after cleaning groove fill the grooves with smart care hybrid polyurathane sealent and providing and applying cold applied elastomeric smart care damp proof ultra(fiber reinforced elastomeric liquid applied water proofing membrane)complete all as specified and as directed. Make : Asian Paints smart care waterproofing

M&L Colour Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard dense soil

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil

M&L100 mm thick Plain Cement concrete type B-2, 1:2:4 (40 mm graded aggregate) Laid in base of flooring as specified and directed by Engineer In charge.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on walls complete all as specified and as directed.

M&L Providing, cement concrete in roof kerbs stones or mud stops, Coaping rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

Returning, filling in, including spreadin, levelling, watering and well ramming in layers not exceeding 25 cm in hard/ dence soil, complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for glass deviding strips 3 mm thick & 28 mm width inserted in position in floors complete all as specified and as directed

M&L Forming Contraction (Dummy)joints 65mm deep x 10mm wide,filled with sealing compound all as specified and directed by engineer in charge

M&L Primer for Grade ‘A’ sealing compound all as specified and directed by engineer in charge

M &L Sealing Compound Grade “A”(Normal).

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous fillerand top 30 mm primed andsealed with sealing compound,Grade ‘A’ for 100 mm thk slab as specified and directed by engineer in charge

M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item No. 111 but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

All as per item No. 111 but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for ACs and geysers

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 100W, 2 module, socket type and capacitive type all as specified and directed by Accepting officer

S & F call bell, ding dong AC 230 Volt single pole complete as specified.

S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

Supply & fixing in replacement of high efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

S & F 4ft, 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specified and directed. Model: Crompton Linea Pro or similar

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed.

S & F sheet metal enclosure powder coated for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by Engr-in-charge.

Supply and fixing MCCB 40Amp four pole 415 Volt , breaking capacity 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed.

NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The quoted rate shall include earth pit display board mentioning the location, date of testing and value of earth reistance, in standard colour of blue, white and green, made of Vinyl material pasted on Sunboard Waterproof, UV laminated for weather protection

Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

S&F Ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, Non-BLDC, power consumption not to exceed 40W, BEE 3 star rated as per latest BEE norms in vogue at the time of supply complete all as specified and directed by Engr-in-charge. Model: Havells ES40

S&F 400mm swing wall mounted fan, 4star, smooth oscillation, copper motor with remote control, 72 speeds, plastic body complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 4 core complete all as specified and directed by Engr-in-charge.

S&F exhaust fan of sweep 150mm, plastic body , power consumption not to exceed 25watt, AC single phase 230V, 50Hz, copper winding complete all as specified and directed by Engr-in-charge.

M&L for cutting round/square holes suitable for fixing of exhaust fan of size 150 mm into through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

Supplying, installing, commissioning and testing of split type air conditioning unit indoor / outdoor complete with cordless remote control unit and with in built with BEE 5 star rating inverter type with CFC refrigerant 2 tonne capacity, BEE 5 star rated (As per latest BEE norms as applicable, ISEER must be atleast 5.0 ) including the complete all as specified and directed Note :- The unit rate quoted by the contractor shall deem to be inclusive of (i) Cutting holes in walls / windows of any thickness for installation of AC, connection and making good the disturbed surface to match with the thickness for installation of AC etc, connection. (ii) Electric cable of size 4 sqmm copper conductor PVC sheathed and of required length to connect outdoor unit and outdoor unit to voltage stablizer. (iii) Copper piping with insulation and drain piping.

Supply only bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs, heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs, working in R - 134a refrigerant complete all as specified and directed

Supply and lay pipe galvanized, "Medium class", ISI marked, including fittings 25mm, conforming to IS 1239:latest dia complete all as specified and directed by Engineer-in-charge

Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside substn yard complete all as specified and directed by Engineer-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by the Engineer-in-charge

KOGANTI CONSTRUCTION COMPANY (BID ID -3344458)

VACON INFRASTRUCTURES (BID ID -3343870)