PROVN OF LED FITTING HIGH MAST LIGHT AT TEZU UNDER GE LEKHAPANI

Amount

S&F Galvanized steel High Mast of 16 Mtrs height lighting system with its accessories including foundation bolts manufactured from special steel and Hot Dip Galvanised along with nuts, washers, anchor plates and templates, feeder pillar panel with digital timer control and raising & lowering mechanism for integral power tool, Twin aviation Lamp etc. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3 . It shall also include accessories for high mast including head frame, steel wire rope (7/19 construction) double drum winch, Galvanized Lantern carriage arrangement 'suitable for 08 Nos.luminaires Symmetrically & its control gear boxes and with 03 point suspension system. The mast shall have an integral power tool installed inside the base compartment for its operation. ( Material construction of high mast sheet will be of BSEN 10025 / IS 5986 or equivalent ). with wiring cable for luminaire connection including suitable size of foundation for 16.0 mtr high mast considering the soil bearing capacity 10 T / Sq. mtr at 2 meter depth and using RCC M-25 grade (design mix) concrete with reinforcement,form work,earthwork complete all as per manufacturers instructions and as directed by Eng-in-charge. Note:-Making of civil foundation for erection of high mast and feeder pillar panel as per manufacturer recommendation demeed to be included in the unit rate.

Supply and fixing LED flood light fittings with and including lamp (minimum 150W rating), separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, IP Protection not less than IP 66, Protection should be Class I,Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries with separate external surge protection device 4 Kv to 10 kv rating and separate connector block for termination of incoming cable connection all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out/for laying under ground cables/pipes etc and getting out any type soil complete all as directed

Returning filling in including spreading, levelling, watering and well ramming in layers n-exc 25 cm complete all as directed.

Removing excavated soil to a distance n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as directed.

Supply and spreading fine river sand as in trenches for cushioning of under ground cable/filling cable ducts complete all as directed.. Note : - Only punned thickness shall be measured for payment purpose

Supply and lay burnt brick sub class ‘B’ of standard size laid in trenches as protection to cables complete all as directed.

Boring of holes under road, pavement, hard standing by trenchless technology technique for 40-80 mm dia pipe all as specified and as directed.

M&L for GI pipe light grade of sizes 40mm dia, ISI marked with all fitting for cable protection, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc all as specified and as directed.

M&L for PVC Flexible suction hose pipe (light grade), laid in trenches, under coping, bend or fixing on wall/pole/ crossing nallah etc of 40mm dia, all as specified and as directed.

Supply, laying and testing LT XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6mm GI strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as directed.

M/S A K ENTERPRISE (BID ID -3063490)