Up Gradation of Pump and Motors Installed at Pump House Near Water Reservoir IRBn Campus Port Mout SW SITC of 40 HP Kirloskar Electric Induction Motor Coupled with Kirloskar 65/32A DSM Pump including Control Board and accessories

Amount

Supplying, Installation, Testing and commissioning of Kirloskar make 40 HP 3phase Electric induction Motor coupled with Kirloskar make DSM 65/32A pump having suction & delivery of 80mm x 65 mm, discharge of 22 ltr/Sec at the delivery head of 65 mtrs @ 1450 RPM, with base frame for Electric Motor & pump with CCI Work for foundation work nut & bolt, suitable coupling arrangement or its equivalent as required and directed Engineer - in - Charge.

Fabrication and fixing of wall mounting type Motor control Switch Gear Board of size 1.80 mtr x 1.20 Mtr made out of 16mm WPC Board and sandwhiched both side by 3mm thick Hylem Sheet (white finished surface)with angle iron of size 25mmx25mmx 5mm and MS Flat 20mm x5mm for frame & support having spacing of 15cm from the wall as required and directed Engineer - in - Charge.

Supplying installing and testing commissioning of fully automatic Star Delta Starter suitable for 40 HP Electric Motor on the existing Motor control Switch Gear Board including providing connection with 10 Sqmm FRLS copper cable and copper lugs from mains to motor as required

Supplying and fixing of 100A 3 phase 4 Way Bus Bar Chamber suitable for wall mounting similar to Havels Cat No. IHBC010004 or its equivalent on the existing panel Board including providing connection with 10 Sqmm FRLS copper cable from the mains as required

Supplying and Fixing of 10KA 63A FP MCB along with 4 way SPN DB Double door on the Existing Electrical Board including providing connection with 10 Sqmm FRLS copper cable and copper lugs from the mains as required.

Supplying and Fixing of 63A FP Isolator along with 4 way SPN DB Double door on the Existing Electrical Board including providing connection with 10 Sqmm FRLS copper cable and copper lugs from the mains as required.

Supplying and Fixing of 100A Cutout (RYB) Similar to Havells Cat No. IHKKRN4100 or equivalent along with Neutral Link on the Existing Electrical Board including providing connection with 10 Sqmm copper cable and copper lugs from the mains as required.

Supplying and Fixing of 3 Nos Batten Holder along with 0.5 Watt LED Ball Lamp for Phase indication on the Existing Motor Control Board including connection with 1.5 Sqmm Cu cable etc as required.

Supplying of following XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: No. 7098 (Part-I) 1988 as applicable. Make: Havells and should be NABL certified or equivalent to Polycab /Finolex etc. as required. a) 25 Sqmm 3.5 Core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying & Laying of double walled corrugated high density polyethylene pipe having corrugation at the outer wall and plain surface inner walls, conforming to IS 14930 part-II complete with necessary HDPE fittings for protection of 1.1 KV underground cable directly in ground at a depth of 50 cm including excavation and filling the trench etc as required. a) 50 mm outer dia and 38 inner dia nominal size

Supplying & Laying of double walled corrugated high density polyethylene pipe having corrugation at the outer wall and plain surface inner walls, conforming to IS 14930 part-II complete with necessary HDPE fittings for protection of 1.1 KV underground cable directly in ground/ clamping on wall surface etc as required. a) 50 mm outer dia and 38 inner dia nominal size

Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. a) 3½ X 25 sq. mm (32mm)

ELECTRICAL WIRING OF PUMP Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing of surface mounted LED Industrial Box Type Fitting with 20 Watt LED T-8 PC Tube Lamp Similar to C&S Model No. CRUX/1X20W ordering Code LTIC00120WLED/WD or its equivalent etc., as required.

Supplying and fixing Bakelite batten/ angle holder including connection etc. as required.

Supplying of 12Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12W/ B22 BULB or its equivalent etc., as required.

Supplying of BLDC Energy efficient AC Ceiling Fan 1200mm Sweep (Colour: Opal White, Brown ) without Remote similar to crompton ENERGION Riviera 5 Star with out regulator or its equivalent etc as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of 300mm sweep, 900 RPM Heavy duty Exhaust fan equivalent to Havells Model : Turbo Force SP or its equivalent etc., as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.