SITC OF HIGH MAST @KAMARDANGA POL SITE

SUPPLY OF 30M HIGH MAST — pply of 30 Mtr, 20 sided, High Mast shaft in three sections, BSEN 10025 Grade - S-355 steel, with headframe mechanism Latching Sy em for Lantern Carriage shall be designed in three sections suitable for designed for max. wind speed of 50 M/Sec as per IS : 875 Pa - III, with raising lowering system comprising, head frame, luminaries carriage suitable to Install Min. 12 Nos luminaries (500W ea ) in symmetrical / asymmetrical arrangement.

I, T & C of HIGH MAST — stallation, testing and commissioning of 30M height high mast lighting system with all accessories, tools and tackles required to co lete the job in all respects. The erection of masts should be done with the help of suitable equipment.

SUPPLY OF FOUNDATION — upply of Foundation Bolt (OEM Make Only) for High Mast Pole as per Manufacturer’s Design (1 set for each High Mast Pole) made from ecial steel along with nut, bolt, washer, 2 Nos common template & anchor plate.Quoted Rates shall be Inclusive of Third Party Inspe ion Charges.Note: Foundation Bolts along with Templates shall be dispatched along with high mast consignment as one single consi ment after carrying out TPI and on instructions from HPCL E.I.C."

SUPPLY OF FLP FEEDER — upply of OEM FLP Type Feeder Pillar with Rain Shield Canopy, outdoor MS Frame stand mounted in 2 chambers construction for compone s and terminals and shall be Flameproof type suitable for Gas Group IIA / IIB, with IP-65 Class protection, complete with componen viz. 63 A TPN MCB, Selector Switch, 42 Amp TP Contactors, Single dial cyclic timer for the automatic switching of luminaries, Po r tool control with 2 no 9A contactors for Raise & Lower with Push Buttons, Terminals etc. Bottom terminal chamber suitable for t minating Incoming 25 sq. mm and outgoing 16 & 2.5 sq. mm terminals Power Cable and Control Cables as specified.Feeder Pillar shall flameproof and suitable for Gas Group IIA/IIB.Quoted Rates shall be Inclusive of Third Party Inspection Charges.Note: Minimum mension 780 mm x 400 mm x 235/155 (H x W x D)."

I, T & C of FLP Feeder Pillar — stallation, testing and commissioning of FLP type feeder pillar all accessories, wirings, tools and tackles required to complete the ob in all respects. Job also includes necessary concrete works, earthing connections etc.

SUPPLY OF 500W LED — upply of 500 W LED floodlight luminaries Non-flameproof symmetric type, in die-cast aluminium housing, toughened glass complete with ccessories viz. driver, internal and external surge protection, open and short circuit protection, MS adjustable mounting frame etc. imilar to AMPL F 600L WH NB - A3 New, as per design and controlled through a programmable timer for 24 Hrs. in feeder pillar.Quo d Rates shall be Inclusive of Third Party Inspection Charges.Preffered Make – BAJAJ / HALONIX / CROMPTON / HPL Power & Electric Lt / PHILIPS. "

SUPPLY OF 500W LED — upply of 500 W LED floodlight luminaries Non-flameproof asymmetric type, in die-cast aluminium housing, toughened glass complete wi accessories viz. driver, internal and external surge protection, open and short circuit protection, MS adjustable mounting frame et similar to AMPL F 600L WH NB – A2 New, as per design and controlled through a programmable timer for 24 Hrs. in feeder pillar.Q ted Rates shall be Inclusive of Third Party Inspection Charges.Preferred Make – BAJAJ / HALONIX / CROMPTON / HPL Power & Electric d / PHILIPS. "

SUPPLY OF DOUBLE DOME — upply of approved make Double dome aviation obstruction LED lights Non-flameproof type.Quoted Rates shall be Inclusive of Third Par Inspection Charges.Preffered Make – BAJAJ / HALONIX / CROMPTON / PHILIPS / HPL Power & Electric Ltd."

S,I,T,C OF 4C * 16 SQMM AL — upply, Lay, Terminate & Commission 4 C x 16 sq mm A2XFY 1.1 KV grade, extruded XLPE inner sheathed, steel armoured, FRLS out sheathed Cable with Stranded Aluminium Conductor, confirming to IS: 7098 Part -I.Quoted Rates shall be Inclusive of Third Party nspection Charges for supply of Cables.Note: Scope of job includes excavation of cable trench up to depth of 750 mm and backfill g with 2 layers of sand 150 mm on Top and Bottom of cable complete with Brick protection on top layer of sand as per safe engineerin practices.Quoted rate to include cable end termination with double compression type Glands with crimped copper lugs, hardwares comp te as per direction of E.I.C"

I, T & C of LIGHT FIXTURES — nstall, Test & Commission of Light Fixtures per High Mast: Install, Test & Commissioning of Light Luminaires complete with all a essories including supply and laying of flexible cables for internal wiring for luminaires, end connections, lugs, MCB etc. and com ssioning of light fixtures as per standard practice and as per instruction of E.I.C."