SPECIAL REPAIR TO BUILDING NO CC 120 AND CC 84 AT ARMY WAR COLLEGE UNDER GE (AWC) MHOW.

Amount

Demolition of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons , cover slabs of drain etc. all as specified.

M & L 18-20 mm thick machine cut one side polished black granite in kitchen plate form, windows ceils , stair case etc set and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing and 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.

Description same as per item No 3 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course in floor including demolition of PCC, complete all as specified and directed.

M & L for vitrified cerameic tiles 8-10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Description same as above item No 08 but laid in vetical surface such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour Non-skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm,(400X400mm) in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed of CM (1:6)

M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) & complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) complete all as specified.

S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete as specified

S & F 35mm thick 2nd class hard wood Plain framed panelled shutter(any number of panels) with panels ot timber flat on both sides (feather edged), or of veenerd pparticle board medium density, wood particle board with commercial face veneers, fixed to chowkats complete all as specified and directed.

M&L 35 mm thick, 2nd class Hard wood ( sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauaze complete all as specified.

M & L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete.

M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or grith and apply one coat of synthetic enamel complete all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including fixing shutter with three nos Aluminium butt hinges for each shutters as per specification complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt, ISI marked complete all as specified.

S&F Butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 150 mm long ISI marked all as specified.

S&F 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) ISI marked and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or nut and bolt with ms flat strip fixed to steel windows , wooden doors etc ,or galvnized wire staples complete all as specified and directed.

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

M & L for PCC 1:2:4 type C-1 (using 12.50 mm graded stone aggregate) as in hold fasts,chowkhats including necessary use and waste of form work complete all as specified and directed.

Demolition cement concrete (unreinfoced) of any description and in any position not otherwise specificially provided for.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Brickwork with modular sub class 'B' bricks, straight or curved on plan exceeding 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish outside MD land complete all as specified .

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately)

Suppl only integral water proof compound and mixed with required qty as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement complete all as specified and directed..

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

S&F ( in repairs) PVC valveless, syphonic action type flushing cistern, low level white or colour with inlet, ball value, float and handle including brackets and provision of 32 mm dia PVC flush pipe and making connections, complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (triple layered) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F( in repairs) Vitreous china wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S & F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S & F in reapairs 75 mm bore PVC (SWR) bends any radius

S & F in repairs 110 mm bore PVC (SWR) bends any radius

S & F 75 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F 110 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F (in repairs) 75 mm bore cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified .

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat red oxide complete all as specified and directed.

M & L Preparation of old steel surface of any description over 10 cm in width or grith not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing 15 mm dia bore and connection including removal from site complete all as specified and directed .

Taking up or down steel tubing 20 mm dia bore and connection including removal from site complete all as specified and directed .

S & F of CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings including brasss bends, Tee, reducer etc. fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings including brass bends, Tee,reducer etc. fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete.

S & F in repairs vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting including mixer or piller tap etc complete. Note :- Pillar tap shall be measured as supply only under respective item

Complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M & L apply one coat of Dr Fixit crack-X paste OR Dr Fixit Crack - X shirnkage,wall crack filler on prepared old/new wall surfaces and apply one coat primer of DR Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it dry for 2 to 3 hours over a coat of crack filler over a coat of 1mm thick external wall putty and apply two neat coats ( one coat horizontal and other coat vertical direction) of Dr Fixit Raincoat Elastomeric Acrylic water proof exterior coating (of white or any tint/colour which shall be approved by GE), apply by brush or roller at a time interval of 5- 6 hours complete all as specified and as directed. Note :- All application shall be done through authorised company applicator as aproved by GE.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

M & L Preparation of old wall surface and apply one coat of white wash on wall surface including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

S & F in repair corner shelf of 300 mm size with ABS brackets complete.

Supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and as directed. (Make : Plumber Cat No NEC-5100LB / Prayag Part No 6675 /Jaquar Cat Part no CQT-23281UPR).

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F in repair PVC bath cabinet box mirror type with shutter complete.

S & F in repair CP Thumbler Holder, complete all as specified and directed by Engineer-incharge.

S & F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge.

S & F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.

S & F in repair over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union.

S & F( in repair) 15 mm bore two way bib taps long body, with wall flnge chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F( in repair) 15 mm bore bib taps long body, with wall flange chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

Demolition of reinforced cement concrete of any descrption and any position as in roofs, floors,beams, landings, chajjas, balconies, cover slabs and similar suspended work complete all as directed.

S & F Framed work as in grills for balcony, of MS tube for top rail and MS square bars for as guard bars, or rolled section as in sunshade, side supports or any situation of work etc, revited or forged in to spikes and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

M & L Dubbing out average 20 mm thick on irregular/ demolished surface of walls, concrete surface like cantiliver beam , chajjas, lintles, balconies etc in Cement plaster 1: 4 complete all as specified and directed.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S & F in repair 25mm dia stainles teel curtain rod of 1 mm thick fancy type fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment. (i) Surface prepration like opening the cracks/removal of loose concerete. (ii) Pressure washing the entire roof to remove dirt , dust alage fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores , capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP (vii) First and Second coat of elastomeric dr fixit Roof Seal . The authorized applicators are under :- (i) P Tech Solutions 92 Anurag Nagar Ring Road Indore (II) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note : A warranty of 10 years be provided by the contractor for the service rendered.

Demolition lime Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 on concrete/brick surface finished even and smooth without using extra cement mixed with WPC ( WPC shall be measured and paid separately )

M & L for appline one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes.

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mas concrete complete all as specified and directed.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm, complete all as specified and directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm including waste pipe complete all as specified and directed.

S & F in repairs 18 mm thick Plywood grade BWR, type BB as in cupboard , wardrobe etc.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over plywood as per manufacturer's instructions complete all as directed and specified.

S&F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

Taking down carefully copper/aluminium point wiring of lights, fan, bell, sockets and power point complete with all fittings and fixtures such as switches, sockets, ceiling rose, flush boxes etc all as specified and as directed.

Taking down old /UNSV distribution board /Meter Panel board any size by disconnection of electric connection carefully complete with old UNSV MCCBs / MCBs, Isolators etc complete all as specified and directed..

Taking down carefully copper/aluminium Sub main wiring of any size from surface / concealed / existing conduit of any height and removing materials at site and making good disturbed surfaces of walls , floors roofs etc complete all as specified and directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M No II or reused for fixing in item no. 123 complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box , cover plate and cover frame of suitable size complete all as specified and directed for the following:-

(a) One light / fan /bell controlled by one, one way switch 5/6 Amps

(b) One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

(c) One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

(d) One light point controlled by 2 two way switch 5/6 Amps

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size complete all as specified and directed

S&F Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S/F modular bell push type 6 A ,1 module complete all as specified and directed.

S/F bell multi music type AC 230 volts single pole complete all as specified and directed.

S&F modular switch 2 way 6A, 1 module, ISI Marked complete all as specified and directed.

S&F decorative ultra slim poly carbonate LED tube light fitting 4 feet long 22 watts with THD less than 15% very high efficiency suited for T-8 tube light luminaire with system efficiency 110 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long ,THD less than 15% complete all as specified and directed.Make : as approved by GE.

S&F modular angular lamp holder, PVC / Polycarbonate fancy type with back plate for fixing of B 22 LED lamp 240 volt including LED bulb 9/10 W, 5 star rated and taking down complete all as specified and as directed.

S&F wall mounted decorative luminaire, SS finish fixture with opal glass diffuser suitable for 8/9 watts LED 5 star, designed for modern homes, glare free light and easy to install snap fit installer complete including LED bulb 9/10 W, 5 star rated and taking down of old CFL/bulb wall fittings making good of surfaces all as specified and directed.

S&F Reading light wall mounted , movable type ,stainless steel body with high quality reflector and EB 22 brass holder suitable for 5-9 W LED bulb canbe easily positioned in any direction including LED bulb 5/9 W 5 star rated , incl making good of surfaces all as specified and directed.

S&F in repair LED bldg. security light fitting 30 watts made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt including provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40mm size medium grade 1.2 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including five comparment for fixing of five Nos single phase meter and MCB and porviding glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable of size 04 sqm from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge.

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCB DB, SPN 12 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz with 200 amp rated busbar suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, fixing flush to wall & making good the disturbed surfaces by plastering and 02 coats of wall putty incl distempering to match with the existing surface complete all as specified and as directed.

S&F MCB DB, SPN 6 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, fixing flush to wall & making good the disturbed surfaces by plastering and 02 coats of wall putty incl distempering to match with the existing surface complete all as specified and as directed.

Refixing of MCB DB 2 way received from taking down by making good disturbed surfaces by plastering and 02 coats of wall putty incl distempering to match with the existing surface complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SPN change over 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

S&F RJ 45 LAN jack with shutter ISI marked complete all as specified and as directed.

M&L for 20A DP energy saving switch (with key tag) 3 module along with 03 module metal flush box and cover plate flush to wall incl making good of the disturbed surface complete all as specified and directed.

S & F repair metal plug and socket DB,double pole 240 Volts and including one 20 Amp MCB SPN ,'C' Curve , ISI marked including taking down, complete all as specified and as directed.

M & L sub main wiring with 2 runs of 10 sqmm single core multistranded FRLSH PVC copper wire as main wire along with 1 run of 10 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surface by plastering and 02 coats of wall putty incl distempering to match with the existing surface complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Description same as per Item No. 138 here in above but with 2 runs of 4 sqmm main wire along with 01 runs of 4 sqmm earth wire complete all as specified and directed.

Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of concerned AGE E/M complete all as specified and as directed.

S&F exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver incl necessary altration of aluminium window frame & brick wall any thicknesss (upto G+1 bldg) for insatllation of exhaust fan of size 250 mm sweep including making good the wall all as specified and as directed

S&F exhaust fan , steel body AC single phase 230 volt of size 300 mm sweep complete with blade, frame and louvers all as specified and directed incl making good surface all as specified and directed.

M & L for altration/ devoloping existing hole of RR/ brick wall any thicknesss (upto G+1 bldg) for insatllation of exhaust fan of size 300 mm sweep by dismantling brick work/RR work/concrete work manually or by mechanical means including making good the wall by plastering in cement mortar 1:4 and well finishing incl applying two coat of distumbering to match with the existing surface incl removal of malba,cleaning ground surfaces all as specifed and as directed at site.

S&F ceiling fan with brushless direct current motor (BLDC), 230 volts, 1200 mm sweep with min air delivery 220 CFM, service value of the fan shall be greater than 7.0 as per BIS, with blades, down rod and other necessary accessories and electrical connections from ceiling rose to fan terminal, without remote system, suitable for operation with capacitive type fan regulator complete all as specified and as directed.

Supply , fixing rigid non metallic PVC conduit fixed concealed/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed

S&F fan regulator stepped electronic capacitive type, modular type 02 module , 100 watts all as specifed and directed.

S&F for water heater storage type (Geyser) with inner container of capacity 25 ltrs, with glass coated heating element, electrically operated, AC 230 volts, BEE 5 star rated (as per latest star label period), ISI marked, including 04 Nos of hold fastner nuts required suitable size fixed in brick wall, incl stainless steel hot & cold water PTMT connections 15 mm size with nuts and length 450 mm, 3 core copper connecting wire with plug top including writing the MES number with synthetic enamel paint & taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connection and deposit to MES store yard of AGE E/M No II complete all as specified and as directed. The geyser should be tough enough to withstand pressure upto 08 bars. The inner tank should have a minimum of 07 years warranty submitted by the tendered from the manufacturer. Additional warranty on models having less than 07 years will not be accepted.

Taking down water heater any size/capacity, by disconnecting all electric and water supply connections & refiixing in repairs electric water heater storage from taking down of any capacity complete with new 02 nos PTMT connectors , 04 Nos anchor fastner , NRVs including painting of Gysers complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as specified and as directed.complete all as specified and directed.

Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation ,laying of cable or pipe ( where provide for protection of cable or fixing poles and stay and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and as directed.

Supply and laying fine sand for cable protection in layers incl punning complete all as specified and as directed. Note :- Punned thickness shall be measured for the payment.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl connecting to existing LT panel board and VTPN DBs all as directed at site.

M&L for Tubes, 'light grade,galvanised, with all fitting of size 50 mm ;laid in trenches or fixed in wll with saddles for cable protection/ mounting security lights incl bending and cutting to required length all as specified and directed

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

M/S Sunshine Construction

Jamna Constructions

J B CONSTRUCTION AND DEVLOPERS

SATHI ENTERPRISES

Goyal Construction