GEJM-72/2023-24

Amount

Excavation in trenches n.exc 1.5 mtr in depth and n.exc 1.5 m in width in any type of soil for laying cables and getting out complete all as specified.

Supply and lay LT PVC / XLPE insulated, multistranded armoured, heavy duty under ground electric cable with multistranded aluminium conductor, 1100 volts grade of following cross sectional area including cable lugs, jointing materials etc, laid in trenches fixed on poles or laid through GI pipes including taking down old cable. Note-: (i) Excavation and earth work will be measured and paid seperately under relevant item. (ii) Sand & Brick to be safely / properly stagnated and reused as directed by Engr -in- Charge. (iii) Old U/S cable shall be the property of contractor and will be measured in Sch of credit. (a) 2 core 16 sq mm

All as per Ser item no 02 here in before but of size 10 sq mm 2 core

All as per Ser item no 02 here in before but of size 16 sq mm 4 core

All as per Ser item no 02 here in before but of size 25 sq mm 4 core

Supply and fixing in replacement of GI pipe light grade 50 mm bore for cable protection.Make-TATA/Jindal/Surya

Supply and spreading dry river sand in trenches for cushioning of cable 8 cm layer before laying the cable and 15cm thick layer after laying the cable. Note-Sand layer shall be paid for 18mm only after well pressed.

Supplying and laying dry bricks in trenches over under ground electric cable for mechanical protection with width equal to length of bricks with well burnt sub class ‘B’ old size bricks laid flat complete.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick.

Removing excavated surplus soil to a distance not exceeding 50 m away and depositing where directed at a level not exceeding 1.5 m from the starting point.

Material and labour for street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 25mmX3mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size including painting with one coat of aluminium paint over a coat of red oxide / primer all as directed incl taking down of old unsv bkt .

Material and labour for LED Street lighting 60W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 60W LED 6000K. MAKE:- Havells Cat part No - ENDURAPEARLPLUSSL60WLED757SASYTOPC, Crompton cat part No - LST-60-CDL and Wipro - LR02-671-XXX-57-XX.

Material and labour for LED flood light 100W LED IP65 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type with high power LEDs as light source including electronic driver 100W LED. MAKE:- Havells cat Part No - JETAIRISFLS100WLED757ASYMLTG, Crompton Cat Part No - LFL-120-CDL/60-M and Wipro cat part No - LF20-132-060-57-XX

Supply & fixing of automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54.the contactor,MCBs and copper circuit wiring (min.10sqmm) should enough to take: Single-phase load of 5KW;contactor Rating 40Amps; MCB(sp) Rating 40Amps.MAKE:-Nature switch :Kakatiya energy systems pvt.ltd. hyderabad/bajaj/healer. Contactor:- BCH/L&T/Schneider or equivalent (as per IEC-60947-4-1/IS-13947-4-1), MCBs(Input-output):Hager/schneider/L&T/BCH or equivalent (as per IEC-60898/IS-8828),Circuit wiring : Finolex/polycab/RR Kable or equivalent. Model no SWADEEP-02EC5KW1P.

Supply and fixing of multi core round PVC insulated aluminium conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 2.5 Sqmm, 3 core from junction box /overhead conductor to street light inside/outside pole complete all as specified.

Supply and fixing thermoplastic polystyrene/ polycarbonate enclosure shock proof, IP 65 (weather proof) rust proof, dust proof, water proof, internally embedde gasket with provision for all side cable entry throught gland(IP-65) and /or gromments (IP-55) size of enclosure (250x 180 x 110mm ) with suitable connectors for / 3 phse loop in loop out and branch out vibration proof connections and fixing on PCC / Steel poles with 25 x 3 mm thich 02 Nos of clamp with nuts bolts and washers and proper timbling Make - Hansel or equivalent Sintex.

Material and labour for Cement concrete in foundation of PCC pole type D2 1:4:8 40mm graded stone aggregate

M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping of poles etc including necessary form work.

Supply & Errecting truelly vertical position steel tubular swaged poles in replacement of UNSV /Broken PCC poles complete with CI base plate, finial taper plug bolts, nuts & screws 9.0 mtr long type 410 SP-31 including painting of poles with 2 coats of approved aluminium paint over a coat of red oxide, making five strips of black and white paint from PCC of size 30cm thick, numbering of pole with black or white colour by means of stencils all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less that 1.5M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe with and funnel, PCC 1:3:6 Type C-1 chamber with 40 mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars @ 150 mm c/c both way with GI protection pipe complete all as specified and directed by Engineer-in-Charge.

Supply & laying or fixing or passing through pipe 1100 volts grade heavy duty service wire PVC cable aluminium conductor and overall PVC wire sheathing 6 Sqmm 2 Core nominal cross section complete all as directed by Engr-in-Charge.

Supply & laying or fixing or passing through pipe 1100 volts grade heavy duty service wire PVC cable aluminium conductor and overall PVC wire sheathing 16 Sqmm 2 Core nominal cross section complete all as directed by Engr-in-Charge.

Material and labour for LIARA Bollard light 10 Watts, 240 Volts, IP 65, 360 degree light distribution, die cast aluminium housing powder coated housing with frosted PC diffuser complete inluding fixing using metal sleeve anchor fastners and bolts of suitable size and quantity to be fixed in concrete all as specifiedand directed. MAKE:- Crompton cat part No -

Material and labour for MAPLE Post Top light 40 Watts, 360 degree, 240 volts IP 66 , die cast aluminium housing powder coated housing with frosted PC diffuser complete inluding fixing using metal sleeve anchor fastners and bolts of suitable size and fixing by anchor fastner with 50 mm dia GI pipe as per suitable size quantity to be fixed in concrete all as specified.MAKE:- CAT PART NO LPTO-40-CDL OF Crompton and Havells cat part No - RUBYPT35WLED757PSYMTOPC and Wipro Cat part No - LP02-501-XXX-57-XX.

Durga Electricals

M/S JIWAN SINGH

M/S S K Electricals Regd

M/S RAJ ENGINEERS

BMMJ TRADERS AND ENGINEERS

M/S Raman Construction Co.