Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC 94 PHASE II HOUSEING COLONY UDHAMPUR J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹23.7 L+₹25,686 (1.10%)Rejected-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹23.9 L+₹52,338 (2.24%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹24.0 L+₹59,409 (2.54%)Rejected-AOC | L4 | Rejected-AOC Rejected due to not being L1 | |
| 5 | L5₹24.9 L+₹1.5 L (6.56%)Rejected-AOC NEAR TCP DOMAIL WARD NO 2 UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹50,960
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 12 2022 23 ADDTION ALTERATION TO BUILDING NO P 71 UNDER AOR OF GE (NORTH ) UDHAMPUR
2022_MES_525293_1
GE/U(N)/12/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹50,960
Yes
18 Jul 2022
20 May 2022
20 Jun 2022
20 May 2022
18 Jun 2022
3 Jun 2022
60 days
Amount
M&L for dismantling floor , hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, all as specified & directed by Engr in Charge
M&L for demolition of cement concrete (Unreinforced) ground floor any thickness at any situation all as per specified and directed by Engr in Charge.
M&L for non - skid coloured glazed Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed of CM (1:4) incl skirting all as specified & directed by Engr in Charge
M&L for non skid coloured ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM(1:4) including skirting all as specified & directed by Engr in Charge.
M&L for glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick cement plaster on fair faceof brick work in cement mortar 1:3 as in backing coat for wall tile complete all as per specified and directed by Engr in Charge.
M&L for machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified & directed by Engr in Charge
Ditto all as per srl item no 06 above but on skirting backing coat of 10 mm thick in CM 1:3 complete all as specified & directed by Engr in Charge.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor or roof and finished even and smooth with using extra cement all as specified & directed by Engr in Charge
S&F factory made steel windows (Box type) with and with out glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr in Charge.
M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr in Charge.
M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 410-0 or FE 310-0 all as specified & directed by Engr in Charge
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane all as specified & directed by Engr in Charge
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each paneall as specified & directed by Engr in Charge
S&F galvanized mild steel wire cloth 0.56mm normal dia of wire and average width of apparatus 1.18mm and fixed width tinned lacks of galvanized wire staple all as specified & directed by Engr in Charge
M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each all as specified & directed by Engr in Charge
All as per item no 15 above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as per specified and directed by Engr in Charge.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primerall as specified & directed by Engr in Charge
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified
M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed by Engr in Charge
All as per item no 19 above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr in Charge.
S&F mild steel cold rolled butt hinges medium weight 100mm long complete all as specified and directed by Engr in Charge.
S&F Aluminium alloy ,anodised,sliding door bolt 300 mm length with hasp,staple (bolt type) and fixing clip of sheet,cast or etruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed all as specified & directed by Engr in Charge
S&F Aluminium anodised barrel tower bolts stove enameled black with bright both 150 mm long complete all as per specified and Engr in Charge.
S&F Aluminium handle cost type 150mm long oval type stove enameled black complete all as per specified and Engr in Charge.
M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr in Charge.
M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting all as specified & directed by Engr in Charge
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primerall as specified & directed by Engr in Charge
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement all as specified & directed by Engr in Charge
M&L for demolition of mud in roof any thickness including plastering and leaping complete all as per specified and directed by Engr in Charge.
M&L for rendering 15mm thick on fair face of brick work or concrete surfaces with CM (1:4) on roof even & smooth w/o using extra cementall as specified & directed by Engr in Charge
M&L for priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm all as specified & directed by Engr in Charge
M&L for two coats of aluminium paint on roof padding surfaces complete all as specified & directed by Engr in Charge
M&L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc.complete all as per specified and directed by Engr in Charge.
M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as per specified and directed by Engr in Charge.
M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement all as specified & directed by Engr in Charge
M&L for rendering 5 mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement all as specified & directed by Engr in Charge
Supply only integeral water proofing compound complete all as per specified and directed by Engr in Charge.
M&L for demolition of brick work built in CM including all quions arches pillars etc all as specified & directed by Engr in Charge
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks all as specified & directed by Engr in Charge
M&L for half brick work with sub class 'B' bricks , straight or curved on plan to any radius in half bricks thick walls built in CM 1:4,all as specified & directed by Engr in Charge
M&L for Plain cement concrete 1:5:10 type E2 (40mm graded stone aggregate) in mass concrete for lean concrete of WC/ Bath complete all as per specified and directed by Engr in Charge.
M&L for priming the sunken floor surface with bitumenous primer @ 0.7 litres / Sqm and applying a coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm and thereafter supply and laying Polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm blinded with fine sand in dry condition @ 0.5 Kg / Sqm, all as specified & directed by Engr in Charge
S&F vitreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap all as specified & directed by Engr in Charge. .
S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete.all as specified & directed by Engr in Charge.
S&F in repair Viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste coupling CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x6mm including embedded in Plain cement concrete block with Plain cement concrete 1:2:4 type B-1 and Incl 450mm PVC waste pipe getting with holes complete all as specified and directed by Engr-in-Chare.
S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm all as specified & directed by Engr in Charge
S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified & directed by Engr in Charge
S&F in repairTowel rail 600mm long aluminium tower bolts 20mm D type all as specified & directed by Engr in Charge
S & F in repairs vitreous China bowl urinal flat back size of 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern,)including waste fittings complete all as specified & directed by Engr in Charge.
S&F in repair 15mm bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed for iron pipe fixed in repair complete all as per specified and dir by Engr in Charge.
S&F in repair 15mm stop valves/Angle valve, cast copper alloy with crutch or butterfly handle screwed down high pressure screwed for iron pipe fixed in repairs complete all as per specified and directed by Engr in Charge.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm/20mm dia complete all as per specified and directed by Engr in Charge.
S&F Tubes medium grade 15mm bore galvanised with all fittings and fixed to wall or ceiling and floor etc complete all as per specified and directed by Engr in Charge.
All as per srl item No 54 above but 20 mm bore pipe complete all as per specified and directed by Engr in Charge.
S&F in repair Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismentling of existing water tank and removed from site all as specified & directed by Engr in Charge
S&F in repair for ball brass valves, 20 mm bore high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for the following bore all as specified & directed by Engr in Charge
S&F in repairs Brass CP shower rose 125mm size all as specified & directed by Engr in Charge
S&F in repairs CP Soap dish approximate size160x160x90mm fix to plugs with screws all as specified & directed by Engr in Charge
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing all as specified & directed by Engr in Charge
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawingall as specified & directed by Engr in Charge
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring, joints, fixed to walls in repairs 110mm bore complete all as per specified and directed by Engr in Charge.
S&F in repair PVC (SWR) bends in any radius 110mm bore in repairs complete all as spd and directed by Engr in Charge.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber rings, joints fixed to walls 75mm bore in repairs complete all as per specified and directed by Engr in Charge.
S&F in repair PVC (SWR) bends in any radius 75mm bore in repairs complete all as per specified and dir by Engr in Charge.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore in repairsall as specified & directed by Engr in Charge
M&L for prepration of old decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of wall care putty including complete removal of existing treatment all as specified & directed by Engr in Charge
M&L for two coats of oil bound distember over a coat of primer over two coats of approved 3mm wall care putty over and including preparation of new plastered surfaces of wall all as specified & directed by Engr in Charge
M&L for preparation of old decorated surfaces of any description by brooming down and applying one coat of white wash on ceiling including of plastered or un-plastered surfaceall as specified & directed by Engr in Charge
M&L for three coat of white wash on new surface of ceilingall as specified & directed by Engr in Charge
M&L for complete removal of existing treatment on walls surfaces and applying two coat of cement base paint (colour/white) over one coat cement primer all as specified & directed by Engr in Charge
M&L for two coat of cement base paint over newly plastered surfaces of wall including one coat of primerand preparing surfaces complete all as per specified and directed by Engr in Charge.
M&L for preparing surfaces plastered or unplastered undecorated surfaces applying two coat of white wash on wall all as specified & directed by Engr in Charge
Taking down carefully point wiring copper / aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed by Engr-in-charge.
M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point/bell point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectivelycomplete all as specified and as directed by Engr-in-charge. and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm.
All as per item No 75 above but for one 3/5 pin socket 5 Amp on same board with cable1.5sqmm size.
All as per item No 75 above but for one 3/5 pin socket 5 Amp on independent board with cable1.5sqmm size.
All as per item No 75 above but for 3 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.
S&F Switch Piano flush type single pole 5 Amps One way, complete all as specified and as directed by Engr-in-charge.
S&F socket flush type single pole 5 Amps One way, complete all as specified and as directed by Engr-in-charge.
S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as requered complete all as specified and as directed by Engr-in-charge.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and as directed by Engr-in-charge.
Taking down existing LED Tube Light fitting and fixture of 05/10/20 watt and bulk head fitting and refixing the same in its original position complete all as specified and as directed by Engr-in-charge.
S&F Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit complete all as specified and as directed by Engr-in-charge.
S&F in replacement E-Lite LED Curve lighting fixture for mirror 10/12 watt LED batten,2' long with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site reuse to measured seprately or disposal by credit complete all as specified and as directed by Engr-in-charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and as directed by Engr-in-charge.
Supply and fixing Exhaust fans steel body,AC ingle phasee 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and as directed by Engr-in-charge.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc
Supply & fix fans ceiling complete with fixing accessories 230 V,1200 mm sweep. BEE 5 star ratedcomplete all as specified and as directed by Engr-in-charge.
Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location complete all as specified and as directed by Engr-in-charge.
M&L for repair of ceiling fan/exhaust fan 1200/300 mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting. If as per site requirement fan will be found burnt rewinding will be provide by the contractor as per unit quoted ratecomplete all as specified and as directed by Engr-in-charge.
Hanging /fixing only ceiling fan/Exhuast fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from site complete all as specified and as directed by Engr-in-charge.
M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement including taking down old us submain wiring complete all as specified and as directed by Engr-in-charge.
Supply and fix vertical three phase & Neutral (TP&N Vertical) Distribution Board 04 way Double door 415 volts grade IP 43 Protection Grade with provision for MCB,TPN as incomming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-charge.
S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and as directed by Engr-in-charge.
S&F 'C' series SPN MCB 40 to 63 Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc.
S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. complete all as specified and as directed by Engr-in-charge.
M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified and as directed by Engr-in-charge.
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing.
Supply and fixing Exhaust fans steel body,AC ingle phasee 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and as directed by Engr-in-charge.
Supply and lay XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and as directed by Engr-in-charge.
M&L for excavation in trenches in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as specified and as directed by Engr-in-charge.
M&L for returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil all as specicified and directed.
M&L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.
M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable complete all as specified and as directed by Engr-in-charge.
Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt all complete all as specified and as directed by Engr-in-charge.
M&L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and as directed by Engr-in-charge.
M&L for Cutting of hard standing n.exc 45 Cm defth, and n.exc 30 Cm width for taking out/laying UG Cable including making good disturbed surface as per existingcomplete all as specified and as directed by Engr-in-charge.
Supply and lay submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRLS sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement including taking down old us submain wiring and complete all as specified and as directed by Engr-in-charge.
S&F Pendant ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mm copper flexible twisted twin cord up to 1.5m length as ordered complete all as specified and as directed by Engr-in-charge.
KUMAR CONSTRUCTION CO
paras ram pachiala
M/S GURU DEV BUILDERS
TULSI RAINA AND SONS
MAHAJAN TRADING CO
Bansal and Sons
joginder singh and sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .