Construction of toilet, Providing shed and Maintenance and Repair work to Hindu Burial Ground at kallamedu in Ward No.79,south zone

Amount

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift etc complete as per the direction of dept officer

Random rubble masonry in cement mortar 1:5 mix with blue granite rough stones for foundation and basement 10 m3

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating,curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying and erecting for Centering for Column & Sunshade etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications

Providing and laying in position standardized concrete Mix M-20 Grade (1:1:3) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum), 5156kg of 10 – 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers – The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards.

Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road side including loading, unloading and stacking the well gravel at road side to departmental gauge for premeasurement including labour charges for laying spreading leavelling to camper etc., complete as per specifications.

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

Plastering with cement mortar 1:5 mix,12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification TNSS No.61,V,VI,(S4)3.

Supplying grill windows & Ventilators including cost of steel and labour charges for welding etc.,complete

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Painting with first quality emulsion paint over Old Surface of two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Painting with first quality Enamel paint over Old Iron Surface of two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete 1:2:5 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers. (the WC should got approved by the Exe. Engineer before use on works)

Flooring with Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20mm thick of approved colour andquality in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including all materials and labour charges etc complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc complete

Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains etc complete

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Lower end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18") etc complete

Supply and delivery and fixing of 1000 lit HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

PVC Pipes and Specials

32mm PVC Pipe

32mm PVC Coupler

32mm PVC Tee

25mm PVC Pipe

25mm PVC Coupler

25mm PVC Elbow

25mm PVC Tee

20mm Screw Down Tap

Add :- GST @ 18%

GAssociates (BID ID -1499532)