UPGRADATION OF UNIT ARMOURY AT VSN NAGPUR

Amount

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework & precast concrete articles

Material and labour for Brick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6

Taking down cement or cement lime plaster, any description on brick or stone/PCC block masonry walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement.

Material and labour for Rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound. (WPC measured and paid separately)

Supply only integral waterproofing compound

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying 3 coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall surfaces by washing, rubbing down and stopping of old painted surfaces and applying 2mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for prepartion of old plastered/unplastered surface of walls incl cornices, pilasters etc & applying two coats of white wash on walls complete all as specified and as directed.

Ditto as per item No 11 above but one coat of white wash on ceiling complete all as specified and as directed.

Material and labour for prepartion of old plastered/unplastered surface of walls incl washing, rubbing down and stopping of painted surfaces etc & applying 1 coat of cement base paint complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Material and labour peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour peparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in soft/loose soil incl removal of excavated material etc complete all as specified and as directed.

Material and labour for Cement Concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concreting.

Supply and fixing of Steel work in tubular section trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described over one coat of red oxide primer.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter of roof covering fixed with self tapping screws etc complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed.

Taking down of shutters of any description exc 1 Sqm and n. exc 2 sqm each and refixing in same opening after resecuring or easing & adjusting etc complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

Material and labour for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified.

Supply and fixing in repair of double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply and fixing sheet glass 4 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 Sqm in each pane.

Supply and fixing sheet glass 5.5 mm thick ordinary quality & glazing with rubber gasket in square exc 0.5 Sqm in each pane.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

Supply and fixing mortice lock of brass, 4 levers, vertical type, size 75 mm

Supply and fixingpressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified.

Material and labour for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames

Supply and fixing glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned)2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, all as specified Note : Wire gauge/glazing to be measured and paid separately.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides all as specified and as directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other cover-ing. Doors, etc. to be prepared for hanging or sliding with and includ-ing either hooks and hinges or steel hanging door fittings including steel sheeting or other covering, running rails and guides etc and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality - A

Material and labour for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described all as specified and directed.

Supply and fixing 150 mm long aluminium anodised handles, cast type,

Supply and fixing for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

Supply and fixing mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as directed .

Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm.

Supply and fixing in repairs of harrison rail mild steel chromium plated of 25 mm dia for curtain rod fixed with two Nos of brackets for each rail all as specified and as directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 3 mm thick fixed to any wooden or metal frame with oil putty or beading including hacking out of old broken glass etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level). Note : - All demolished items/ debris to be removed out side of MoD land.

Material and labour for anti-termite treatment along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. complete all specified and work to be done through authorised agency.

Material and labour for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all specified and work to be done through authorised agency.

Material and labour for anti-termite treatment of voids in masonry wall using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all specified and work to be done through authorised agency.

Material and labour for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all specified and work to be done through authorised agency.

Material and labour for plain cement concrete Type D-2, (1:4:8) (using 40 mm graded crushed stone aggregate) in foundation, sub base, below floor, filling and mass concrete etc complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed 20 mm thk in cm 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing with wax (mirror finish) complete all as specified and as directed.

Material and labour Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and wax polishing complete including 10 mm thick plasteing in cement mortar (1:4) as a backing etc all as specified and as directed.

Raut Construction (BID ID -3260719)

M/s Ashwin Bhange (BID ID -3268783)

Bidder Name

Raut Construction

M/s Ashwin Bhange

Dua Construction