REPAIRS TO INTERNAL WIRING,FANS, GEYSERS, COOLING APPLIANCES, REPLACEMENT TO LED LIGHTS AT RAMNAD UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A' PART -I(E/M PORTION)

Taking down carefully UNSV copper/aluminum point wiring (light, fan, bell, power sockets ) alongwith UNSV fitting/fixtures such as switches, ceiling roses, pendants, regulators, sockets, electrical fittings, light fittings and making good disturbed surface of walls, ceiling floor to match with the existing surface complete all as specified and as directed.

M&L Point Wiring with two single core 1100 V grade conforming to IS-694 of 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLS) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including non metallic rigid PVC conduit of 20mm dia/PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on where required complete with 1.6 mm thick MS sheet fabricated terminal boxes flush mounted and 3 mm hylam sheet cover with for mounting Switches, Sockets, etc. including PVC insulated and unsheathed one Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly complete all as specified and as directed for the following :-

(a) One light/fan point controlled by one one-way switch SP 5 Amps

(b)One 3 pin 5 Amps switch socket combination on independent board

(c)One 3 pin 5 Amps switch socket combination on the same board with other switches,

(a) One light point controlled by two No. of two-way switches

(d) One bell point controlled by bell push switch on independent board

All as per Item No. 03, but 4.0 Sqmm size copper conductor cable and 4.0 Sqmm copper earth wire cable drawn through 20 mm dia PVC conduit/PVC Casing and Caping including provision of conduit and conduit accessories for One 3 pin, 15 Amps switch socket on independent board complete all specified and as directed.

Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts with embossed mark as light/fan on body of switches complete all as specified and as directed.

Supply and Fix in repair Switch piano flush type 5 amps single pole, one way, 240 Volts with embossed mark as light/fan on body of switches including taking down old switches complete all as specified and as directed.

Supply and Fix Socket outlet 3/5 pin, 5 amp, flush type complete all as specified and as directed.

Supply and Fix Switch piano flush type 5 amps single pole, two way, 240 Volts on body of switches complete all as specified and as directed.

Supply and fix Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.

Supply and fix Bell push, AC, 230 V flush type single pole, 5 Amps complete all as specified and as directed. Make: Anchor or equivalent with ISI mark.

Supply and Fix switch socket outlet, multipurpose, flush type, 2 in 1, 5 Amps, AC, 230 Volts complete all as specified and as directed.

Supply and Fix switch socket outlet, multipurpose, flush type, 5 in 1, 5 A/16 Amps, AC, 230 Volts complete all as specified and as directed. Make: Anchor or equivalent with ISI mark.

Supply and Fix Ceiling rose 3 terminals, surface bakelite 65 x 50mm complete all specified and as directed. Make : Anchor / Bajaj / Leader / Cona with ISI mark.

Supply and Fix DING DONG bell AC 240 V single pole 50 Hz and connecting up complete all as specified and as directed. Make : Anchor/Bajaj/Plaza/Leader.

Supply and Fix in repair for switch socket outlet, multipurpose, flush type, 2 in 1, 5 Amps, AC, 230 Volts including taking down of old complete all as specified and as directed.

Supply and Fix in repair for switch socket outlet, multipurpose, flush type, 5 in 1, 5 A/16 Amps, AC, 230 Volts including taking down of old complete all as specified and as directed. Make: Anchor Cat Part No 38819 universal or equivalent with ISI mark.

Supply and Fix in repair for Ceiling rose 3 terminals, surface bakelite 65 x 50mm including taking down of old complete all specified and as directed. Make : Anchor / Bajaj / Leader / Cona with ISI mark.

Supply and Fix in repair for Switch piano flush type 5 amps single pole, two way, 240 Volts with embossed mark as light/fan on body of switches including taking down of old complete all as specified and as directed.

Supply and Fix in repair for DING DONG bell AC 240 V single pole 50 Hz and connecting UNIT- POINT including taking down of old complete all as specified and as directed. Make : Anchor/Bajaj/Plaza/Leader.

Supply and fix in repair for Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc including taking down of old complete all as specified and as directed.

Supply and fix in repair for Bell push, AC, 230 V flush type single pole, 5 Amps including taking down of old complete all as specified and as directed. Make: Anchor Cat Part No 38750 or equivalent with ISI mark.

Supply and fix in repair for Modular switch one way 6/10A , 1 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular switch one way 16A , 1 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular bell push ,5 A, 1 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for modular Socket, 5A- 2 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for modular Socket, 5/15A- combined 2 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for modular Fan Step regulator, 120 W-2 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular switch two way 6A , 1 Module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 1 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 2 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 3 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 4 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 6 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular White cover plate with frame, 8 module including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular metal flush box 1/2 module for modular switches including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular metal flush box 3 module for modular switches including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular metal flush box 4 module for modular switches including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular metal flush box 6 module for modular switches including taking down of old complete all as specified and as directed.

Supply and fix in repair for Modular metal flush box 8 module for modular switches including taking down of old complete all as specified and as directed.

Supply and fix 3mm thick laminated sheet top cover on switch boards including cutting, fixing and scwering etc including taking down old unserviceable hylum sheet, removing the material for taking credit and making good the disturbed surface of wall complete all as specified and directed. all as specified and directed at site.

supply and fix in repair for flushed metal box of size79mmx75mmx46mm (1or 2 module) 1.6 mm thick Galvanised Iron sheet fabricated terminals box to wall and dismantling corroded metal box from wall, removing the material for taking credit and making good the disturbed surface of wall including plastering the sides complete all as specified and directed.

Description all as per item 46.0 but size of metal box 79mmx99mmx46mm (3 module) complete all as specified and directed.

Description all as per item 46.0 but size of metal box 79mmx135mmx52mm (4 module) complete all as specified and directed.

Description all as per item 46.0 but size of metal box 79mmx207mmx52mm (6 module) complete all as specified and directed.

Description all as per item 46.0 but size of metal box 79mmx230mmx52mm (8 module) complete all as specified and directed.

Description all as per item 46.0 but size of metal box 132mmx135mmx56mm (8 module) complete all as specified and directed.

Supply & fix PVC casing & caping of size 25 mm ISI marked on wall/roof/ceiling work etc with all accessories and drawing any type of cables through caping casing all as directed at site including and making good the disturbed surface of wall complete all as specified and directed.

Supply and fix PVC conduit of size 25 mm ISI marked on wall/roof/ceiling work etc with all accessories and drawing any type of cables through PVC conduit all as directed at site including making good the disturbed surface of wall complete all as specified and directed.

Supply and fix PVC conduit of size 32 mm ISI marked on wall/roof/ceiling work etc with all accessories and drawing any type of cables through PVC conduit all as directed at site including making good the disturbed surface of wall complete all as specified and directed.

Supply and fix PVC conduit of size 40 mm ISI marked on wall/roof/ceiling work etc with all accessories and drawing any type of cables through PVC conduit all as directed at site including making good the disturbed surface of wall complete all as specified and directed.

Removing serviceable wiring of any size from conduit/batten/casing/caping on surface of wall, ceiling and keeping in safe custody for resuse complete all as specified and directed.

Taking down unserviceable PVC conduit / casing /caping of any size and removing the material for taking credit complete all as specified and directed.

Taking down carefully old unserviceable submain wiring with aluminum /copper conductor cable 4/6/10/16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and including one run of 25mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III)/ 25mm PVC casing & caping and all accessories along with one run of 4 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor and one run of 25mm dia PVC conduit/PVC casing & caping shall be measured as one length.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and including one run of 32mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III) / 32mm PVC casing & caping and all accessories along with one run of 6 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 2 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor and one run of 32mm dia PVC conduit/PVC casing & caping shall be measured as one length.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 4 runs of 4 sqmm drawn through in and including one run of 25mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III)/ 25mm PVC casing & caping and all accessories along with two run of 4 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 4 runs of 4 sqmm cable along with two run of 4 sqmm cable for earth conductor and one run of 32mm dia PVC conduit shall be measured as one length.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 4 runs of 6 sqmm drawn through in and including one run of 32mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III) / 32mm PVC casing & caping and all accessories along with two run of 6 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 4 runs of 6 sqmm cable along with two run of 6 sqmm cable for earth conductor and one run of 32mm dia PVC conduit/PVC casing & caping shall be measured as one length.

Supply and fix Sheet metal enclousers with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC ) including taking down old unserviceable old unserviceable Sheet metal enclousers with socket plug top complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated double door Distribution Board, of SPN 4 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board, of SPN 8 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board,of SPN 12 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board,of TPN 4 way DB ,415 V with Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board,of TPN 8 way DB ,415 V with Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from positionfor taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board, of TPN 12 way DB ,415 V with Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board,of VTPN 4 way DB with Degree of Protection IP 54 including , Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure powder coated double door Distribution Board, of VTPN 8 way DB with Degree of Protection IP 54 including, Disconnecting electric connections, dismantling unserviceable DBs from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB SP 5 A to 32 A , B curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB SP 40 Amps , B curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB SPN 32 Amps , B curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB SPN 40 Amps , B curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB SPN 50A / 63 A , B curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB TP 40A , C curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB TP 50A / 63 A , C curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB TPN 40 Amps , C curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Supply and fix in repair MCB TPN 50 A / 63 A , C curve including , Disconnecting electric connections, dismantling unserviceable MCB from position for taking into credit complete all as specified and as directed.

Earthing complete with GI earth plate 600mmX600mm x 6 mm thick buried directly in ground/ earth pit not less than 2.25M below ground level with top edge of the plate not less than 1.5M below ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts and washers of GI earthing strip protected by GI pipe i.e. light grade 40mm dia & 20mm dia medium gradeb for watering all as shown in electric plate No.3 of MES SSR Part I connected to earthing test point, testing complete including necessary earth pit PCC 1: 3: 6 chamber and 50mm thick PCC 1 : 2: 4 chamber cover and with 6mm dia mild steel re-enforcement of 10Cm C/L spacing both ways in lieu of CI cover refilling of soil ncluding taking down old complete Earthing system etc complete all as directed by Engineer-in-Charge. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth plate etc., complete

Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth strip of size 32 X 6mm including taking down old unserviceable earth strip complete for taking into credit complete all as specified and as directed by the Engineer-in-Charge

Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth Lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers ofGI earthing strip protected by GI pipe i.e. light grade 40mm dia & 20mm dia medium gradeb for wateringl all as shown in Electrical Plate No.3 and connected to earth testing point all as specified and directed including testing on completion complete all as specified and as directed by Engr-in-Charge including taking down old complete Earthing system complete all as directed by Engineer-in-Charge. Note No.1: The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete

Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth wire 4mm dia including taking down old unserviceable GI earth wire complete all as specified and as directed.

Supply and fix in repair Lightning Protection Single point air termination aluminum rod 12mm dia 300mm long with base plate including taking down old unserviceable aluminium rod for taking into credit complete all as specified and as directed by the Engineer-in-Charge .

Supply and fix in repair Test point terminal box made out of Gun metal or Phosphorous bronze of size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screws including taking down old unserviceable test point terminal box for taking into credit complete all as specified and as directed by the Engineer-in-Charge .

Supply and fix in repair Aluminium strip of 25x 3.15mm fixed with screws/ clamps / insulators for roof conductors and down conductors above ground level complete including taking down old unserviceable Aluminium strip for taking into credit complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair MCCB 4 pole 415 volts , 100 Amps, with rupturing capacity 36 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge. (Make : L&T/ABB/Standard/Legrand)

Supply and fix in repair MCCB four pole 415 volts 50 Hz , 125 amps, with rupturing capacity 36 KA including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge. (Make : L&T/ABB/Standard/Legrand)

M & L for Painting the Panel boards/DB Boxes/covers/DG Set/Accoustic Enclosures as required at site after scraping out completely the old paint with one coat of redoxide primer over two coats of synthetic enammel paint including carrying out minor welding works if reqired complete all as specified and as directed by the Engineer in charge. NOTE:Colour of paint shall be decided by the Engineer-in-charge.

Supply and fix in repair ON Load Change over switch 415V in sheet metal enclosures 4 pole 125 Amps including taking down old unserviceable ON Load Change over switch for taking into credit complete all as specified and as directed by the Engineer in charge.

Supply and fix in repair ON Load Change over switch 415V in shet metal enclosures 4 pole 200 Amps including taking down old unserviceable ON Load Change over switch for taking into credit complete all as specified and as directed by the Engineer in charge.

M & L for Writing letters (Block.Roman, Italic or Indian) with thick paint ,stand out boldly and solidly without showing signs of brush marks, or by Stickering , upto 10 cm height and painting with contrasting colour in the background of letter complete as directed. NOTE:Colour of paint/ stickering shall be decided by the Engg-in-charge.

Demolition, Cement concrete (unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M & L for 75 mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate for making good the disturbed road surface after laying of pipe line over returned filled and compacted earth surface to match with existing road level complete all as specified and as directed.

Supply and fix in repair plug top 3 pin 5 A including removing old unserviceable item for taking into credit complete all as specified and directed.

Supply and fix in repair plug top 3 pin 15 A including removing old unserviceable item for taking into credit complete all as specified and directed.

Supply and fix copper tubular terminal socket of size 2.5 Sqmm complete including crimping it properly all as specified and directed.

Description all as per item 98.0 but size 4 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 6 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 10 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 16 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 25 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 35 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 50 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 70 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 95 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 120 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 150 Sqmm complete all as specified and directed.

Description all as per item 98.0 but size 185 Sqmm complete all as specified and directed.

Supply and fixing in repair of PVC insulated unsheathed cables of size 4sqmm 3 core multi-stranded Copper conductor wire including taking down of old complete all as specified and as directed.

Taking down carefully unserviceable ceiling fans of any size from its position, dismantling blades, taking the fan motor to electrical repair shop and bringing back the fan motor after making it serviceable & testing and hanging the ceiling fan in its position after fixing the removed blades properly and making necessary connections to ceiling rose complete all as specified and directed.

Description all as per Sl item No 112.00 but for exhaust fan of any size/model complete all as specified and directed.

Description all as per Sl item No 112.00 but wall mounted fan of any size complete all as specified and directed.

M & L for Bearing Heavy Duty double ball bearing set (2 nos) with tolerance, Hardened Carbon Steel Balls with protective seal lubricated with high quality grease for smooth running for Ceiling fan complete all as specified and as directed.

M & L for Bearing Heavy Duty double ball bearings/bush bearing set (02 nos) with tolerance, Hardened Carbon Steel Balls with protective seal lubricated with high quality grease for smooth running for exhaust fan complete all as specified and as directed.

Description all as per Sl item No 116.00 but for flame proof exhaust fan of any size/model complete all as specified and as directed.

Description all as per Sl item No 116.00 but for wall mounted fan of any size/model.

M & L for condensor 2.5 mfd for Ceiling fan, oil type.complete all as specified and as directed.

M & L for condensor 2.5 to 4 mfd for exhaust fan, oil type.complete all as specified and as directed.

M & L for condensor 2.5 to 4 mfd for flame proof exhaust fan, oil type.complete all as specified and as directed.

M & L for condensor 2.5 to 4 mfd for wall mounted fan, oil type.complete all as specified and as directed.

M & L for removing the burnt winding of ceiling fan of any size, cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating complete all as specified and directed by Engr-in-charge.

All as per Item No. 123, but exhaust fan of size 300mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No. 123, but exhaust fan of size 450mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No.123, but flame proof exhaust fan of size 450mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No. 123, but wall mounted fan of size 380mm to 450 sweep complete all as specified and directed by Engr-in-charge.

M & L for shaft of ceiling fan complete all as specified and directed by Engr-in-charge.

All as per Item No. 128, but exhaust fan of size 300mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No. 128, but exhaust fan of size 450mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No. 128, but flame proof exhaust fan of size 450mm sweep complete all as specified and directed by Engr-in-charge.

All as per Item No. 128, but wall mounted fan of size 380mm to 450 sweep complete all as specified and directed by Engr-in-charge.

Removing the old unserviceable hook fan from its position without damaging ceiling and supply and fix new fan hook in the ceiling and packing it strongly using necessary packing material and ensuring the strength of joint can withhold the weight of ceiling fan, complete all as specified and directed.

Supply only shackle accessories to hold with fan hook complete with rubber bush, bolt, nut, split pin complete all as specified and directed.

Supply and fix canopy suitable for ceiling fans of size 48"/56" all as per existing type and model & Colour of fan at site including dismantling the old ones complete all as specified and directed.

Supply only condenser holder/clamp PVC or metal for fixing capacitor/condenser complete all as specified and directed.

M & L for painting of ceiling fan/exhaust fan/wall mounted fan of any size/make/model complete in site with synthetic enamel paint of approved colour by brush including filling cavities with fillers, one coat of after cleaning dust and rewriting the fan number etc all as directed.

M & L fan blade set high quality for 1200 mm sweep fan with fixing screws complete all as specified and directed.

M & L fan blade set made of aluminium for 300 mm sweep exhaust fan with fixing screws complete all as specified and directed.

M & L fan blade set made of aluminium for 450 mm sweep exhaust fan with fixing screws complete all as specified and directed.

Supply and fix louvers for exhaust fan of any size including taking down old unserviceable louvers and removing the material for taking credit complete all as specified and directed.

M & L for dismantling taking out of unserviceable geyser of any capacity/make/model, transporting to the workshop for complete over-hauling, testing of copper container, rectifying the defects including replacement of of glass wool/insulating material of existing quality and returning to the site at INS Parundu, refixing and connecting up with the water connection and testing including replacement of following parts :- Note :- Replacement of spares will be measured and paid for separately under respective items of the schedule here-in-after as supply only.

Removing the the door assembly and the deposits to be removed by scraping or cleaning the element with diluted Hydrochloric acid and flush out sediments deposited in the tank.

Supply only glass lined Incoloy 800 heating element of capacity 2 KW with rubber gasket complete all as specified and directed.

Supply only capillary type high precision thermostat (2 nos) preferebly with highest safety VDE mark suitable for storage type water heater complete all as specified and directed.

Supply only non-self resetting capillary thermal cutout preferebly with highest safety VDE mark suitable for storage type water heater complete all as specified and directed.

Supply only Steel (SS) braided ,Flexible Hoses (2 nos) having a minimum pressure rating of 8 bar and compatible for hot water applications including making end connections for water inlet/ outlet from/to water heater or to the discharge line complete all as specified and as directed.

Supply only Anode rod made of aluminium / magnesium complete all as specified and as directed.

Supply only Temperature control knob complete all as specified and as directed.

Supply only Heating indicator lamp and power indicator lamp complete all as specified and as directed.

Supply only drain valve complete all as specified and as directed.

Supply only geyser tank of capacity 25 Ltrs made out of heavy gauge stainless steel with glass enamel coating or coated complete all as specified and directed.

Supply only multifunction safety relief valve/pressure relief valve suitable for geyser complete all as specified and directed.

Supply only brass Non return valve 15 mm/20 mm dia suitable for geyser complete all as specified and directed.

Supply only Apparatus plate assembly suitable to fix thermostat, heating elements as of geyser and nuts etc complete all as specified and directed.

Supply only brass Fusible plug complete all as specified and directed.

M&L for Painting of water heater (Geyser) up to 25 Ltr capacity with synthetic enamel paint of approved colour over a coat of redoxide after removing of old paint by scraching and filling of cavities with fillers.

Supply only PVC insulated unsheathed cables of size 4 sqmm 3 core multi-stranded Copper conductor wire suitable for geysers complete all as specified and as directed.

Supply and fix 3 pin plug top suitable for metal socket of capacity 25 Amps complete all as specified and directed.

Removing the tank from the geyser, brazing to arrest the leakage, reassembling and refixing complete all as specified and directed.

Supply only Bottom inspection chamber cover suitable for 25 Ltrs capacity geyser of any make/model complete all as specified and directed.

Supply and fix in repairs Lamp holder PVC / Polycarbonate for LED bulb 18 W, isolated body including taking down old unserviceable lamp holders and removing the material for taking credit complete all as specified and directed.

Supply and fix in repairs wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,100 Lm/W ,6500 K with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old U/S fittings for taking into credit complete all as specified and directed Make :Crompton,Model :TRIM LINEA ,Cat Part No.LCTLN-20-CDL or equivalent in Bajaj / Wipro / Philips

Supply and fix in repairs LED light fitting, bulk head luminaries 10 W or nearest higher wattage with Pressure Die cast housing LED bulkhead with suitable for surface and wall mounting applications with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed including taking down old U/S fittings for taking into credit complete all as specified and directed . Make : Crompton,Model :STUD,Cat Part No.LBHP-10-CDL or equivalent in Bajaj / Philips /Wipro

Supply and fix in repairs LED light fitting 2 feet,10 W or nearest higher wattage,230v, with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old U/S fittings for taking into credit complete all as specified and directed. Make :Crompton,Model :TRIM LINEA,Cat Part No.LCTLN-10-CDL or equivalent in Bajaj /Philips /Wipro

Supply and fix in repairs recessed mounting 2 ft x 2 ft LED luminaire 36W or nearest higher wattage 6500 K suitable for amtrong/grid ceiling with super bright LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old U/S fittings for taking into credit . Make : Crompton, Model :POLARIS I Cat Part No.LCTLRNE-36-FO-CDL or equivalent in Philips/ Bajaj/ WIpro.

Supply and fix in repairs of LED 3W light fitting round recess mounting downlighter fitting including taking down old U/S fittings for taking into credit and minor alteration to false ceiling as required at site and making the surface good. Make :Bajaj Model : SLEEK RD LED , Cat No BGSLO SLEEK 3W WH RD or equivalent in Philips/ Crompton/Wipro.

Supply and fix in repairs of LED 18W light fitting round recess mounting downlighter fitting including taking down old U/S fittings for taking into credit and minor alteration to false ceiling as required at site and making the surface good. Make :Bajaj Model : SLEEK RD LED , Cat No BGSLO SLEEK 18W WH RDor equivalent in Bajaj / Philips/ Crompton.

Supply and fix in repairs Electronic Ballast 36 watts /40Watts including taking down old unserviceable ballast and removing the material for taking credit complete all as specified and as directed.

Supply and fix in repairs Electronic Ballast 28 Watts including taking down old unserviceable ballast and removing the material for taking credit complete all as specified and as directed.

Supply and fix in repair 2x28 watts electronic ballast suitable for FTL fitting including removing old one all as directed.

Supply and fix in repair 2x36 watts electronic ballast suitable for FTL fitting including removing old one all as directed.

Supply and fix in repair tube rod LED, 15 watts T5 double side connection, 4' long after taking out old burnt choke and fluorescent tube. Make : Wipro, Crompton, Bajaj, Phlips.

Supply and fix in repair tube rod LED, 20 watts T8 double side connection, 4' long after taking out old burnt choke and fluorescent tube. Make : Crompton, Bajaj, Phlips,Wipro

Supply and hang in repair vertical mounting integral highbay/mediumbay LED IP65 luminaire, 100 watts at hanger ceiling with Luminaire efficacy: >120 Lm/W,beam angle 120 degree,IP65.Surge protection of internal 4kV and external 4kV Make: Bajaj , Model : BLAZE LED ,Cat No- BGHBM 100W LED XE or equivalent in Bajaj/Wipro/Philips

Supply and fix in repair LED bulb 16 watts complete all as specified and as directed.

S&F in repair energy saving LED security light fittings, 30 Watts or nearest higher wattage, with in-built electronic driver, IP 66 class of protection with versatile pressure die-cast aluminium body, toughened glass cover with silicon gaskets and energy efficient LED and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. Make:Crompton LSTS-30-CDL/NL-M (ASTRA NEO)or equivalent in Philips/Bajaj/ Wipro

S&F in repair energy saving LED street light fittings,60 Watts or nearest higher wattage, with 10kV SPD and in-built electronic driver, IP 66 class of protection with versatile pressure die-cast aluminium housing parts, pure polyester powder coated dark gray housing, toughened glass cover with silicon gaskets and energy efficient LED and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. Make: Crompton LSTP-60-CDL-M (NEXUS NEO) or equivalent in Philips/Bajaj/ Wipro

S&F in repair LED flood light fittings with in-built electronic driver, 120 Watts or nearest higher wattage, with 10 kV SPD , IP 66 class of protection with pressure die-cast aluminium body including LED 120W and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. Make:Crompton LFLN-120-CDL/60-M (PLUTO NEO ) or equivalent in Philips/Bajaj/ Wipro

Supply only for following items for refrigerators/Deep Freezers 320 Litres capacity including testing and commissioning etc complete all as directed.

(a) Relay unit.

(b) Thermostat assembly.

(c) Condenser coil

(d) Freezer for double door refrigerator

Supply only new compressor including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas providing NRV for further topping up of gas and re-fixing in the position including complete testing and commissioning all as directed for the following appliances :-

(a) Refrigerators 310/320 litres capacity. Make: Samsung or Voltas /LG/Bluestar/ Tecumseh

(b) Deep Freezers 320 litres capacity. Make: Samsung or Voltas /LG/Bluestar/ Tecumseh

M & L Painting complete with super enamel paint of approved colour for Refrigerator/ water cooler all as specified and directed.

Supply and charging R22 /R32 /R410 Gas (to be brought by contractor from authorised dealer/ manufacturer) complete all as specified and directed.

RK ENTERPRISES

sri manikandan enterprises

JR ENTERPRISES