REPAIR/ MAINT OF STREET LIGHTS, SECURITY LIGHTS, FLOOD LIGHTS, SOLAR LIGHTS, HIGH MAST LIGHTS AND ALLIED WORKS AT ZONE B AREA AND ADJOINIG UNITS UNDER GE (EAST) MATHURA

Supply and fix in replacement Electronic LED driver suitable for LED street light fitting capacity 30/45/70 Watt make and specification as installed at site complete all as specified and as directed.

Supply and fix in replacement Electronic LED driver suitable for LED street light / flood light fitting capacity 90/150/200 Watt make and specification as installed at site complete all as specified and as directed.

Supply and fix in replacement Surge protection device suitable for LED Street light/flood light any wattage complete all as specified and as directed.

Note for 2 to 4 : - Electronic LED driver should be consist of all safety controll feature like SMPS based constant current supply with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection,Surge Voltage protection.

Supply only following items to be incorporated against item No 5 here in before:

Lithium Phosphate Battery 12 volt 15 AH Pack with BMS Protection

Solar panel for generation of solar energy capacity 07 watt.

Electronic battery charger suitable for 12 volts battery.

DC to AC convertor suitable for battery 12 volts.

LED security light 20 watt IP 66, pressure die cast aluminum housing and heat resistant toughened glass with light intensity not less than 1500 lumens. Make : C&S/PHILIPS/ Crompton.

Supply and fixing in replacement of high efficiency IP-65 LED Solar smart integrated light all-in-one type 40 Watt with built in premium grade mono crystalline solar pv panel 70 wp,back up for 12 hours Lithiumm base battery,11.1/12.8V,33.0 AH with inbuilt BMS single FRP body duly polyurethane coating (Camouflage color),> 120 LM/W with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller PIR sensor .The light has automatic drawn to down operation and maintenance free after installation.High efficient IP-65 LED solar lighting system with built - in high efficiency solar panel, LED light and long life lithium based battery with high efficiency micro processor based charge controller and PIR sensor. The light has automatic dusk to down operation and maintenance free after installation. Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.

Repair/maint of High Mast light poles complete dismantling, checking for repair/replacement of unserviceable parts as required including greasing of motor, chain, checking of rope etc.and making the high mast lights operational to replacing unserviceable spare parts and refixing the same at existing location and making electrical connections with existing wire complete all as directed. Notes - (i). Cost of supply and fixing of major items required to make the High Mast poles serviceable shall be measured and paid separately under relavent items of this schedule. (ii) All T&P used for lowering/raising of High Mast lights/fittings etc are included in quotated rate.

Supply and fixing in replacemnt of sheet moulding compound junction box shock and rust proof, termite resistant, tamper proof , front openable type for single phase, two wire rating of size 250x200x105mm complete with one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole / wall complete. Make - Sintex or equivalent in Hensel/ABB / Power System & Controls.

Supply & fixing in replacemet multifunctional digital timer swith with inbuilt function for switching on / off street lights according to the rising / setting of the sun with combination function according to astronomical time and / or fixed preset times complete with all connection to existing panel as per directed & complete testing . Make :- Legrand as per Cat Part No 4126 54 or equivalent L&T / C&S / Havells

Supply & fixing Automatic Security light control panel having sheet steel enclosure power coated CRCA sheet suitable for three phase,6 KW rating, outdoor installation,floor mounted, IP 54 protected including making all connections and grouted in PCC of type B-1 (1:2:4) with foundation should be 100mm above ground level complete with comprising of the following switch gears:- (i) MCB TPN 40Amp rating -01No (ii) Multifunctional Digital Timer Switch - 01 Nos (ii) Contactor with nominal current rating 32Amp TP (iii) Outgoing MCB SP with Suitable rating - 03 Nos (iv) Auto/manual switch (v) Incoming and outgoing terminal suitable for three phase supply.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting. Painting LT 9 Mtr long PCC pole in Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint, writing pole Nos. & applying one coat of snowcem on PCC muff & remaining portion of the pole all as directed by Engr-In-Charge.

M&L for street light bracket made out of 40mm dia medium grade GI pipe of 1.2m length bent to required shape suitable for fixing street light / security light fitting on Steel tubular pole / RCC pole / building wall including two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted street light brackets with clamps, nuts and bolts etc, complete all as directed.

Supply and fixing in replacement MS clamps including nuts, bolts and waashers made out of mild steel flat strip 30 x 5mm thick including cutting, bending, drilling holes in shape and size as per the pole size nd fixing with PCC/steel tubular pole for holding of GI brackets for mounting of street lights complete all as specified and as directed.

M&L for dismantaling of old cracked / unserviceable PCC poles / steel tubular pole struts any type and size.

Supply and fixing in replacement of steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note : Earth work and PCC in foundation shall be measured separately.

Supply and fix in replacement steel tubular swan nacked pole with cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note : Earth work and PCC in foundation shall be measured separately.

M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation of PCC poles/struts as specified including necessary form work.

M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of stay assembly etc including necessary form work , all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for copping around poles, including necessary form work finishing even and smooth without using extra cement, all as specified and directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning XLPE insulated, steel tape / wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area :-

(a) 10 sqmm 4 core.

(b) 16 sqmm 4 core

(c) 25 sqmm 4 core

Excavation in trenches for laying under ground cable, any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge.

Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 3 m in depth and getting out complete.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Removing surplus excavated material to a distance not exceeding 50meter above the starting point complete all as specified and directed by Engr in charge.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying reinforced precast concrete cable cover class LV type 1 with flat size 250 mm x 150 mm x 40 mm complete all as directed.

Supplying and fixing in replacement 1100 volts grade heavy duty flat service electric cable with stranded aluminium conductor of size 10 Sqmm twin core , weather proof , PVC insulated with inner sheathing of PVC tape and overall PVC sheathed for providing electrical connections to existing security / street lights complete all as directed.

Supply & fixing Weather proof flat twin core aluminium conductor cable of size 2.5 Sqmm, 1100 volts grade including dismantling existing unserviceable cable any description and complete all as specified and directed. Make : Havells/Plaza/Finolex/Polycab

Supply and fixing in replacement of LED street light fitting 30 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. Make : Havells/ Syska/ PHILIPS/ Bajaj/ Crompton.

Supply and fixing in replacement of LED street light fitting 45 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. Make : Havells/ Syska/ PHILIPS/ Bajaj/ Crompton.

Supply and fixing in replacement of LED street light fitting 70 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

Supply and fixing in replacement of LED street light fitting 90 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

Supply and fixing in replacement of LED street light fitting 120 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

Supply and fixing in replacement of LED flood light 100 watt 230v AC Outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp complete all as directed at site.

Supply and fixing in replacement of LED flood light 200 watt 230v AC Outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp complete all as directed at site.

Supply and fixing in replacement of Post top lantern LED type 30W 230V AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and Fixing in replacement MCB single pole 6 Amp-32 Amp for street light junction box / panel including connection complete all as directed . Make: Havells/L&T/ Legrand /ABB

Supplying and fixing in renewal MCB single pole 230 volts 50 Hz AC of rating 40 to 63 Amp including connection complete all as directed. Make: Legrand /Havells/ABB/ L&T

Supply & Fixing Power Contactor 63 - 80 Amp rating 4 pole including all connected accessories with suitable rating like coil / auxiliary Contact etc) as per site requirement and suitable for street light controll panel complete with all connection as directed Make: L&T or equivalent of Schneider / Legrand / C&S / BCH

Supply & Fixing Power Contactor 25 to 40 Amp rating single pole including all connected accessories with suitable rating like coil / auxiliary Contact etc) as per site requirement and suitable for street light controll panel complete with all connection as directed Make: L&T or equivalent of Schneider / Legrand / C&S / BCH

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

S&F of Aviation obstruction light luminaries fittings having integral LED aviation light comprising of aluminium housing with polycarbonate enclosure at the top of the pole and making necessary electric connection and fixing arrangement of aviation light Cat Part No BGAV 302 LED or eqvt

S&F in replacement LED Bollard Cylindrical shaped cast aluminium with opaque threaded polycarbonate diffuser for optimum ingress protection IP 65, 12 watt with integrated driver and all necessary work complete all as specified and directed

Supply and fixing in replacement LED bollard with Mushroom shaped 09 Watt, with bulb holder, suitable for LED bulb with cast aluminum housing and polymer diffuser for pleasant light output, IP 65 protection complete all as directed at site.

S&F steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete all as directed:-

(a) 40 mm bore

(b) 50 mm bore

M&L for HDPE Double Wall Corrugated pipe of size 40mm outer dia and 32mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to wall with suitable clamps for cable protection complete all as specified and directed. Make : Gemini/Stiple.

M&L for rewinding of electric motor upto 2.5 HP capacity with super enamel copperwire of existing gauge including insulation and varnishing, including repair to gear boax after dismantling all electrical and mechanical connection from High Mast light, testing and commissioning at site complete all as specified and as directed.

M&L for replacemet of high mast wire rope of existing size complete all as specified and as directed.

Supply & fix of MCB TPN 40 to 100 Amps,' C' series , bracking cap 10KA, 415V complete including taking down old MCBs all as specified and directed.

S&F in replacement LED retrofit lamp 12 Watt.

Supply and fix in replacement Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specifed

S&F in replacement of PVC insulated sheathed 1.5 sqmm 3 core copper cable 1100 volts grade ISI marked complece all as specified for street light connection.

Please Enable Macros to View BoQ information