8734 SPECIAL REPAIR TO BLDG NO P-36 AT SOUTH CAMPUS OF AFMC UNDER GE (CENTRAL) PUNE

Taking down chowkats or frames (any type) n.exc 1.5 sqm with shutters (without taking off shuttrs from the frames) & removing from site including making good to disturbed jambs complete all as specified and directed.

Taking down chowkat or frames (any type) exc 1.5 sqm & n. exc 4 Sqm with shutters (without taking off shutters from the frames & removing from site including making good to disturbed jambs complete all as specified and directed.

Taking down shutters of any description, exc 1sq.m and n.exc 2 sq.m each and removal from site etc complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fiXpowder coated aluminium sliding window (minimum powder coating thickness 50 micron) in any approved colour. The window shall be three-track type made of extruded aluminium profiles with hollow multi-chamber sections. The window will have three shutters: 2 sliding sashes to receive 4 mm thick tinted glass. 1 sliding sash to receive stainless steel wire mesh for mosquito proofing (0.36 mm nominal dia, 1.18 mm width aperture). The shutters will have sliding interlocks (one vertical length per shutter). Glazing beads will be mitred cut at all corners, and holes will be drilled for fixing hardware and drainage of water. The window frame will be fixed to any type of wall using suitable fasteners/screws. The installation will include EPDM gaskets, steel roller system, touch lock of zinc alloy (powder coated to match window), and other required materials/accessories. Note: The unit rate includes supply of glass, wire mesh, hardware, accessories, and all materials necessary for installation. Samples of all materials/hardware (Jindal catalogue of Series-B or techno commercially equivalent) shall be submitted for approval before execution.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work in any colour for ventilators made of rectangular tube of aluminium section frame with and including one sets suitable size of louvers, fixed on both vertical frame having 06-10 Blades for receiving 5mm thick frosted glass strips (Min wide 10 cm) with and including providing opening for exhaust fan by using extra frame work and other required material of same make & colour as per required basis and direction of Engr-in-Charge, aluminium frame sections conforming to catalogue No. 14097 of 'JINDAL' or of techno commercially equivalent complete all as specified and directed. Note: The unit rate quoted by contractor includes the cost of 5 mm thick frosted glass strips & stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing and all other connected accessories.

M&L for 2nd class hardwood 35 mm thk Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for Powder coating Anodised aluminium frame for doors, windows, ventilators ((minimum thickness of powder coating 50 micron)) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminum (minimum thickness of powder coating 50 micron) work in any colour for single/double leaf swing type aluminum door (openable one/both sides) fixed with any type door frame work including appropriate heavy duty fixing materials such as 01XTop & bottom Pivot, 01Xfloorsprings, mortise door handle lock vertical type size 100mm of brass body 4 lever etc and One set of 15-16mm dia SS brush finish pull & push handles (approX200mm length) "C" shape of approved make & design on both sides of approved make Godrej/Everite/Ozone/Hardwyn/Dorma or techno commercially equivalent with and including 5.5mm thick clear glass & providing with pasting one side forasted computerised films on glass as per design provides during sample approval of door with clips aluminium, beads, filling gaps at junctions at top, bottom & sides with required EPDM rubber/neoprene gasket etc. Note : The rate to include all materials, labour, transport, taxess, delivered and placed in position at site of work. Each door shall be treated individually with complete set of accessories to be provided on each door, complete all as specified and directed. Before creation of door, the sample of all materials/accessories/hardware confroming to make of 'JINDAL' catalogue No. Both vertical Shutter :19501, Shutter top rail : 19503, Shutter Middle rail : 20060, Shutter Bottom rail : 19511, Glazing clips : 19352 or techno commercially equivalent make will be submitted to Engr-in-Charge for weighing of powder coated door section and approval of materials/accessories/hardware.