Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
27 Jan 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
LP
4 conditions
The Railway reserve the right to procure full or bulk quantity of tendered item is restricted to be procured from RDSO/ICF/RCF/MCF approved sources only.
Trading Enterprises and authorized agent/dealers of OEM will not be extended any MSE benefits.
Land Border Criterion : This tender is governed by RB L/No.- 2020/RS(G)/779/2 dtd. 06.08.2020
In case of Authorised dealer, Firm should upload the valid tender specific authorization certificate of the OEM, falling which their offer will be summarily rejected.
28 conditions · 1 needing a document upload
Validity of the offer shall not be less than 60 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Assam · 100 Metre total
GI Hot Dip Perforated Type Cable Tray wall mountable of dimension (width 300 mm, Height 50 mm, Tray minimum thickness 2.0 mm) along with two nos. Coupler Plate and minimum 08 set of nut-bolts & washers for coupling. The tray is to be supplied along with all the required accessories for wall mounting such as Support brackets, Nut-Bolts, Washers, Fasteners & Clamps etc. Width of support bracket shall be minimum 380mm so that tray can be mounted at a distance 50mm from wall. The quantity of Support bracket and associated accessories should be suitable for supporting & mounting of Cable-tray at a distance of 2 Meter or less . Support brackets, Coupler Plates, Nut-Bolts & Washers, Fasteners & Clamps etc. shall be of either Stainless Steel (SS) or Hot-dip Galvanized Iron (GI). Galvanizing Hot dip shall be as per IS 2629/4759 for cable tray and associated accessories. Make:"POWER PRODUCTS , TATA or Similar
TS255591A~NFR
TS255591A
Open - Indigenous
Goods
Assam
₹0
Exempted
27 Jan 2026
16 Jan 2026
1 item · 100 Metre total
GI Hot Dip Perforated Type Cable Tray wall mountable of dimension (width 300 mm, Height 5 0 mm, Tray minimum thickness 2.0 mm) along with two nos. Coupler Plate and minimum 08 set of nut-bolt s & washers for coupling. The tray is to be supplied along with all the required accessories for wall mountin g such as Support brackets, Nut-Bolts, Washers, Fasteners & Clamps etc. Width of support bracket shall be minimum 380mm so that tray can be mounted at a distance 50mm from wall. The quantity of Support brac ket and associated accessories should be suitable for supporting & mounting of Cable-tray at a distance of 2 Meter or less . Support brackets, Coupler Plates, Nut-Bolts & Washers, Fasteners & Clamps etc. shall be of either Stainless Steel (SS) or Hot-dip Galvanized Iron (GI). Galvanizing Hot dip shall be as per IS 2629/4759 for cable tray and associated accessories. Make:"POWER PRODUCTS , TATA or Similar [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/AC/DBRG, NFR | Assam | 100.00 Metre |
| Total | 100 Metre | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .