Setting up of the State Office of the Adarsha Vidyalaya Sangathan, Assam

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments,Pillars, Posts & Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.51.1 Ridges plain (500 - 600mm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass Single hole basin mixer

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing toilet paper holder : C.P. brass

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 40 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes

25 mm nominal dia Pipes

50 mm nominal dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing, erecting, cutting, fitting and fixing of laminated finished wall clading/boxing in the wall/ column to be made with 19mm thick green marine plywood at fixed on existing wall/column surface with, including coating of kiricide oil on plywood surface and pasting and finishing of 1.5mm thick decorative laminated sheet with pasting tape, adhesive, nails, etc. the work is complete with all necessary hardware hardware materials and labour as directed by the concerned department.

Supplying & placing of Conference Table Size: 6450 x 1800 x 750mm Make : Featherlite Specification: Table Top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of conference table surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under structure Support : 25mm thick PLT gable end. Modesty Panel: 18mm thick 450mm ht plt modesty panel is considered. which is machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Wire Management: 300mm Anodised flip up Made of Aluminium in anodised finish, which has soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, vertical wire Entry covers are provided for entry of power and data. Featherlite Make as directed by the department.

Supplying & placing of Officer's Table, Model: Senate HT-528, Size : 1800 x 750 x 780mm, Side Unit: 905 x 440 x 750mm Make : Featherlite Specification: Material : MDF + particle board of 50mm thickness, Surface finish: Melamine wire manager included. Make : Featherlite as directed by the department.

Supplying & placing of Office Staff working Table, Model: Edge / Perform, Size : 1200 x 600 x 750mm, Make : Featherlite as directed by the department.Specification : Table Top: 25mm pre lam particle board with 2mm PVC edge lipping. Understructure: Poder coated 50 x 50 perform legs & 40 x 20 cross beam support. Front Modesty , Wire management: 125ht metal raceway cover for easy wiring / maintenance. Pre punched slots are provided on raceway for one 8 module(Ancor Roma) & one data port for mounting the switche/sockets. 2 wire manager gromments on table top for access. Mobile Pedestal: 2D +1F CPU trolley and keyboard tray W/O mousepad Make : Featherlite

Supplying & placing of Officer's Chair/ Conference Main Chair Model: Liberate HB Make : Featherlite as directed by the department. High mesh back chair with headrest, Multi lock synchro mechanism, Dura flex mechanism, Adjustable arms, Nylon base. Make : Featherlite

Supplying & placing of Visitor's Chair, Model: Smart VA Low mesh back chair , Fixed arms, Powder coated legs as directed by the department. Make : Featherlite

Supplying & placing of Officer's Chair, Model: Versa MB Medium mesh back chair with headrest, Single lock synchro mechanism, Adjustable arms, Adjustable lumber support Nylon base as directed by the department. Make : Featherlite

Supplying & placing of Conference Staff Chair Revolving, Model: Amaze MB, Medium mesh back chair , Multi lock mechanism , Adjustable arms, Nylon base as directed by the department. Make : Featherlite

Supplying & placing of Conference Staff Chair Fixed, Model: Contact VA , Medium mesh back chair , Fixed arms ,Sledge base as directed by the department. Make : Featherlite

Supplying & placing of Sofa, Model: E007 Two seater Sofa , Leatherette, as directed by the department. Make : Featherlite

Supplying & placing of Center Table, Model: Arthur, Wooden top and legs as directed by the department. Make : Featherlite

Supplying, fitting and fixing blinds horizontal and vertical complete as specified and directed by the department at all levels. Vertical blinds 100mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

5/6 A switch

6 pin 15/16 A socket outlet

15/16 A switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying ,installation ,testing & commissing of Ding Dong type Electronic bell make Anchor or equivalent as specified & directed by the deptt.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying ,installation ,testing & commissing of LED Street light 120 W make Havells/Crompton /Phillips or equivalent as specified & directed by the deptt.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply of following size PVC/XLPE insulated and PVC sheathed 1.1KV gd Solid Aluminum conductor up to 10 sqmm, balance stranded conductor, XLPE Insulated, cores laid up, PVC tape innersheathed, Armour (Aluminium wire for single core up to 70 sqmm, balance Aluminium strip, Glavanised wire for cables upto 2x10 sqmm,, 3x10 sqmm,,4x6 sqmm, & balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable as specified and directed by the deptt. ( ATC or equivalent make as approved by the Department) 50.00 Sqmm 3.5 core

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement).

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Supplying ,installation ,testing & commissing of LED Batten 20 w Tube light with fixture includes its complete fittings length of the tube light 1220 mm make Wipro or equivalent as specified & directed by the deptt.

Supplying Exhaust fan 300 mm make Anchor or equivalent as specified & directed by the deptt.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 100 A,30KA,FPMCC.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying ,installation ,testing & commissing of Hi-Wall 2.0 Ton inverter 5 star rating non ducted split type Air Conditioner with remote complete with copper pipe and complete electrical connection as approved by the deptt. Up to 3 m between the room unit and out door unit as directed by the deptt. ( Blue star or equivalent make )

Supplying with fitting and fixing Voltage stabilizer 4.0 KVA of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (Voltas or equivalent make make)

Supplying fitting fixing and connection as approved by the Deptt.)1/2 inch & 3/4 inch copper piping with insulation along with connection as approved by the Deptt.)cable including testing and commissioning as directed by the department.

Supplying ,installation ,testing & commissing of AC Starter as specified & directed by the deptt.

Supplying with fitting and fixing of Angle iron framing made 50 mmx50 mmx5 mm size angle iron for accommodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine

Supplying and fixing of 3 Pin Top 6 / 16 Amp on the existing 6 / 16 Amp socket including connection as approved by the Deptt.)complete as required

Supplying ,installation ,testing & commissing of 16 w LED Recesses Luminaries SMD LED chip as per LM 80/IS 6106 make Wipro or equivalent as specified & directed by the deptt.

Supplying ,installation ,testing & commissing of 36 w LED Recesses Luminaries fixture in fit 2x2 make Phillips or equivalent as specified & directed by the deptt.

Supplying ,installation ,testing & commissing of Hi-Wall 1.5 Ton inverter 5 star rating non ducted split type Air Conditioner with remote complete with copper pipe and complete electrical connection as approved by the deptt. Up to 3 m between the room unit and out door unit as directed by the deptt. ( Blue star or equivalent make )

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Supplying ,installation ,testing & commissing of SHELTER ULTRA Model No .CLS-305-40-57-HL2-DP-HNW make Crompton /Havells /Bajaj or equivalent as specified & directed by the deptt.

Supplying ,installation ,testing & commissing of Wall fan 400 mm sweep rpm & max. speed 1800 make crompton or equivalent as specified & directed by the deptt.

Supply of Digital control unit for 50 D-Cerno units - Integrated recording capabilities - Integrated web server for control via tablet, smartphone, ... - Design matching look and feel D-Cerno units. - 4 digital RJ 45 ports - Branch or loop connection (redundancy) - LAN connection for web server or camera control protocol - Plug and Play - Eco Power Safe mode - Power connector with locking - XLR out, XLR in, RCA in and two RCA out Make -Sennhiser/Televic/Beyerdynamic - External power supply included

Digital Delegate Discussion unit with removable microphone (30, 40, 50 or 70 cm) - Microphone connector - Microphone button and volume control button - Built-in loudspeaker - Headphone connector - Cable of 2 meters included D-MIC type microphone to be ordered separately Make- Sennheiser/Televic/Beyerdynamic

Digital Chairman Discussion unit with removable microphone (30, 40, 50 or 70 cm) Make -Sennhiser/Televic/Beyerdynamic - Microphone connector - Microphone button, priority, next-in-line and volume control button - Built-in loudspeaker - Headphone connector - Cable of 2 meters included D-MIC type microphone to be ordered separately

GSM immune gooseneck microphone of 40 cm with screwlock. Bi-color led ring indication (red / green). Windscreen included. Not to be used with Confidea FLEX G4Make -Sennhiser/Televic/Beyerdynamic

Connection cable, 2m, black Make -Sennhiser/Televic/Beyerdynamic

Connection cable, 10m, blackMake -Sennhiser/Televic/Beyerdynamic

Supply,installation, testing & commissioning of automatic mixer is ideal for meetings, conferences, soft codec applications, courtroom proceedings ; automatic mixing and acoustic echo cancellation (AEC), change IP configuration (Auto or Static), and more , 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input 1 stereo and 2 mono outputs 2-channel USB audio interface for soft codec (Skype, WebEx) integration or playback from computer Full digital processing on inputs and outputs 8 x 3 audio routing matrixMake -Sennhiser/Televic/Beyerdynamic

Supply,installation, testing & commissioning of 4" full-range ceiling speaker with 70V 30W (170Ω), 100V 30W (330Ω), Sensitivity (1W, 1m) 87dB SPL*1 Maximum SPL (Caluculated, 1m) 108dB SPL*2 Make- Yamaha /JBL/QSC

Supply,installation, testing & commissioning of 4-Channel Power Amplifier with ATR (Accelerated Transient Response) Technology with 4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms, Servo-balanced XLR and 1/4" TRS inputs plus professional speaker connectors Make- Behringer/Crown/QSC

Supply, installation, testing & commissioning of 86 inch ULTRA HD picture quality with type of Edge; Resolution 3840 x 2160 (UHD) Brightness 330cd/m2 viewing angle degree 178⁰ / 178⁰; Aspect ratio 16: 9 orginal, 4:3 vertical zoom, All- direction zoom, Interface 2 x HDMI, 2 x USB; rear RF, AV in digital optical audio out RS-232C, Headphone out, RJ45, External speaker out. Make- LG/Sony/Panasonic

Supply of 12 X optical Zoom and 8 /16X Digital zoom PTZ camera 1080P Full HD Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor,can reach maximum 1920 x 1080 high resolution and achieve quality image, Face Detection Built-in face detection module, enabling PTZ tracking (Optional); Lens : f3.5mm ~ 42.3mm, F1.8 ~ F2.8, Interface : USB 2.0, USB 3.0, HDMI ; HD Out put : 1xHDMI: Version 1.3 Make-Panasonic/Sony/Polycom/People link

Supply, installation, testing & commissioning of havells transparent FR PVC insulated, twin core copper conductor (Flexible) Industrial Speaker Cable.Make-Krystal

Supply, installation, testing & commissioning of the SRW12U wall-Mount Rack Enclosure network applications with limited floor space. Make-APW/Valrack

Supply, installation, testing & commissioning of 10 mtrs. HDMI Cable with 24K gold−plated connectors resist corrosion.Make-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of 2 mtrs. HDMI Cable with 24K gold−plated connectors resist corrosion.Make-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of HDMI switcher for switching Make-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of HDMI Repeater with Audio Embedder and De-EmbedderMake-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of Pop Up Box with Two (2) female VGA HD connector and 3.5mm mini stereo audio jack ; Two (2) CAT RJ45 Make-Magnum/MX/Generic

Supply, installation, testing & commissioning of USB extension cable cum receiver Make-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of HDMI transmitter & receiver Make-Aten/Manhattan/MilestronPro

Supply, installation, testing & commissioning of Output power capacity 2.4 KWatts / 3.0 kVAMax Configurable Power (Watts) 2.4 KWatts / 3.0 kVA; Efficiency at Full Load 93.0 %; Output Frequency (not synced) 60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal; Audible noise at 1 meter from surface of unit 55.0dBA. Make-APC/Delta/Numeric

Supply, installation, testing & commissioning of 26 AH Battery for backup Make - Exide/Amaron

Supply, installation, testing & commissioning of Rack for battery Make- Custom

JITU HANDIQUE

M/S ELITE AGENCY

Md. Karamat Ansari