RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Credenzas ( 1 pieces ) ( Under PAC ) Make godrejinterio 1/4 Model godrejinterio Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) MATERIAL & MATERIAL THICKNESS Material specification Flat single layer prelaminated MDF board conforming to designation PLMDF-203 of IS 14587/Latest having balancing laminated of 0.5mm thick on other side Flat single layer prelaminated MDF board conforming to designation PLMDF-203 of IS 14587/Latest having balancing laminated of 0.5mm thick on other side Material thickness of complete body
RequiredFascia and drawer/compartment ±2 mm 19 19
Required25
Required38 Or higher Material thickness for back
Requiredpartition and drawer bottom/compartmen t shelves ±2mm 19 19
Required25
Required38 Or higher Skirting Thickness ±2mm 19 19 Or higher All plain panels edge to be banded With 0.8-1.0 mm thick PVC tape with the help of hot melt glue With 0.8-1.0 mm thick PVC tape with the help of hot melt glue GENERIC Mode of supply Knocked Down to be assembled at consignee site by the seller Knocked Down to be assembled at consignee site by the seller Design of credenza unit Compartments(With Shelves) only Compartments(With Shelves) only Number of drawers N.A N.A Number of compartments with shelves Three Nos Three Nos Number of shelves in each compartment One Nos One Nos Number of compartment without shelves N.A N.A Number of partition for compartment One Nos One Nos 2/4 Number of compartment in each partition N.A N.A Type of doors for compartments Shutter hung on side Shutter hung on side Number of doors Four Nos Four Nos DIMENSION Width of credenza unit ± 20mm 1850 mm 1850 mm Height of credenza unit ±20 mm 650 mm 650 mm Depth of credenza unit ±20mm 590 mm 590 mm MISC Preservation treatment YES * Locking System provided YES YES Handles for Drawer/Compartment Corrosion Resistance Metal * Fixing of channel for drawer N.A * Length of Telescopic channel ±10mm N.A * Average weight of telescopic channel ±50Gms N.A * Openables shutter hung on side of the compartment With help of auto closing hinges of O cracking overlay type * Number of Buffer provided at the bottom 4 * COLOUR & FINISH Colour teak * Material finish Matt finish * WARRANTY Warrantee period in number of years 1 1
Required2
Required3
Required4
Required5 Or higher CERTIFICATION Test reports to be furnished to buyer on demand YES YES Product having BIFMA certification NO NO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO YES YES 3/4 18001:2007 certified * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
