Construction of Community Hall for Senior Citizen Cantonment Board Deolali

Amount

Excavation- Excavating in trenches, not exceeding 1.5 m depth for foundation, etc. and getting out in hard/dense soil.

All as per item No 1 above, but in soft/disintegrated rock.

All as per item No 1 above, but in hard rock.

M & L (Material & labour) for providing Soling (or sub base) under footing with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber-200 mm thick

Footing (PCC) & steps PCC- M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete.

Footing concrete- M & L for providing Reinforced Cement Concrete in footings in design mix M20 (with 20 mmgraded aggregate)

M & L for Reinforced Cement Concrete in Columns in design mix M20 (with 20 mmgraded aggregate)

M & L for Reinforced Cement Concrete in Beams in design mix M20 (with 20 mm graded aggregate)

Plinth Filling- M & Lfor Moorum Spreading and levelling in layers n exc. 15 cm thick

Plinth filling M & L (Material & labour) for providing Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber-200 mm thick

Flooring PCC-M&L (material & labour)for Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 (main walls& parappet wall)

M & L for Reinforced Cement Concrete in Chajja in design mix M20 (with 20 mmgraded aggregate)

M & L for Reinforced Cement Concrete in Slab in design mix M20 (with 20 mmgraded aggregate)

M & L for Rendering 20 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 (external walls)

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 (internal walls)

M & L for Rendering 15 mm thick on fair faces of ceilings in CM 1:4 (ceiling)

M & L for providing Neeru finish to plastering as specified

M & L for providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4

Flooring- S/F (Supply/fixing) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match- light shade

Skirting- S/F (Supply/fixing) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match- light shade

Flooring- S/F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match-coloured

Toilet walls- S/F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match-coloured

Steps- S/F (Supply/fixing) Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M & L for providing External Wall Painting- including preparation of surface, one coat primer & 03 coat cement paint

M & L for providing Internal Wall Painting- including preparation of surface, chalk whiting, one coat primer & 02 coat plastic emulsion

Mild steel bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips- TMT bars

upto 8 mm dia

above 8 mm dia

Providing Formwork to sides of :

Footing

Ground beam

Plinth beam

Floor Beam

Column

Chajja

lintel

M & L for Providing Water proofing-Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2

MS Grill for window

MS angle 50 x 50 x 5 mm

MS Tubular Section 30 x 30 x 3 mm

Aluminium Sliding Window

Frame

Sliding Rail

Lock Rail

Glass-3 mm

Mosquito Net

S/F (Supplying & fixing) Flush Door- 40 mm thick shutter Plain framed, panelled shutter (one panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, with interlocking rail

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.

S/F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed- First class soft wood

S/F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S/F Steel ventilators, fixed type, with glazing bars

S/F Butt hinges, heavy weight, cold rolled mild steel, and fixed-100 mm

S/F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed-100 mm

S/F Mild steel pressed handles, oval type, stove enamelled black-100 mm

S/F Wash down water closet ,Vitreous China, semi-pedestal pattern (Anglo-Indian Type)

S/F Vitreous China urinals, bowltype (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

Supplying Mild steel tube flush pipe, 32mm dia, for high level cistern

Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand

S/F Pillar taps- fancy type- 20 mm

S/F Stop valves, fancy type-20 mm

S/F PVC (SWR) 'P’ trap-110 mm

S/F Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms)-40 mm

S/F PVC connections 15mm size with PTMT nuts of length 600mm

S/F GI pipes Heavy Class-150 mm

S/F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S/ F PVC (SWR) floor trap, plain with grating including jointing with solvent cement-50 mm

M & L for providing DPC-Polythene film, black, 50 micron laid in floors

Plinth Protection-

Soil Spreading and levelling in layers n exc. 25 cm thick

Soling 150 mm

PCC 100 mm

M & L for providing Anti- Termite Treatment- Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface

for Footing

for ground beam

for plinth filling

for plinth protection

Removing excavated soils exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Total excavation in soft and hard/dense soil

Total excavation in soft disintegrated and hard rock

S/F over head PVC water tank (5000 litres)

S/F Fabricated staircase-Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete

RAMESH SURAJMAL DHADIWAL

ASHOK BABURAO SHINDE