Estimate for concrete lining of kingwah disty (Slice RD 89930-101987)

Amount

Ordinary jungle clearance of both banks of running distributaries, minors and drains with discharge upto 9cum/s including boundary road: Discharge upto 1.5 cum/s

Ordinary jungle clearance of both banks of running distributaries, minors and drains with discharge upto 9cum/s including boundary road: Discharge exceeding 4.5 cum/s

EARTH WORK: Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Dressing of earth work New work or remodeling work.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Excavation of Soil using Hyraulic ExcavatorandhydraulicTractorTrolly I/C cuttingand loading in Trolly and transporting to the embankment locations with all lifts and leads: Disposal/carraige from 0 upto 450m

Excavation of Soil using Hyraulic ExcavatorandhydraulicTractorTrolly I/C cuttingand loading in Trolly and transporting to the embankment locations with all lifts and leads: Disposal/ carraige additional beyond 450m upto 1Km

Excavation of Soil using Hyraulic ExcavatorandhydraulicTractorTrolly I/C cuttingand loading in Trolly and transporting to the embankment locations with all lifts and leads: Disposal/carraige for everyadditional Km upto 10Km

Filling expansion joints with special impervious hot pour Bituminous 525 mm deep and 20 mm wide.

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing: 0 to 1.5 m depth

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :- ((b)) depth exceeding 1.5m sbut upto 3.0ms.

Dressing side slopes and preparation of sub grade for lining.

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII)

Extra bitumen painting at 0.69 Kg. per sqm

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when curved.

Compaction (i) Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling. b (ii) Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction. b (iii) Extra for rolling to specifications.

Filling Contraction Joint with hot impervious hot pour as per drawing and technical specifications,complete in all respect

Providing and laying 200 mm wide LDPE film 150 micron over sleepers

Dag Belling Single Kassi Stroke complete in all respect.

C. Conc. 1:3:6 (M-10) with stone ballast using concrete mixer volume metric type

R.C. Conc. 1:2:4 (M-15) with stone ballast using concrete mixer volume metric type

Earth work involved in dismantling open flume A.P.M. or O.S.M. type outlets with 'H' more than 0.50 m but upto 0.90 m (including excavation, refilling, consolidation and dressing) .

Dismantling O.F., A.P.M. or O.S.M. type outlets consisting of total dismantling with 'H' more than 0.50 m but upto 0.90 m.

Extra labour for dressing bricks on O.F. and A.P.M. type outlets with 'H' more than 0.50 m but upto 0.90 m.

Providing APM cast iron block complete in all respects including supply of pig iron, casting and pattern making, as per ISI specifications no. 7986-1976 ((ii)) 0.25 ft= 7.6 cm (min wt 68 kg)

PCC 1:4:8 with Stone Ballast 40 mm gauge using concrete mixer volume metric type

First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth.

RCC M-20 in superstructure

Centering & Shuttering for flat surfaces such as roofs, landings, chajjas, shelves etc.

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

Dismantling brick work tile, masonry or tile lining In cement

Dismantling concrete Reinforced cement concrete

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil. By Mechanical Means. Depth upto 3 m.

Preparing, watering and ramming surface for laying concrete. Head work. Horizontal.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15.

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25. Using Batching Plant, Transit Mixer and Concrete Pump. For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC/PSC Grade M40. Using Batching Plant, Transit Mixer and Concrete Pump For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 With Batching Plant, Transit Mixer and Concrete Pump.

Extra for laying earth/ fly ash as per specification in 20 cm layers and dressing but excluding cost of rolling.

Re-handling of Earthwork with lead 30 meters

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Filling expansion joints with special impervious hot pour Bituminous 525 mm deep and 20 mm wide.

Drainage Sprouts complete as per drawing no. SD/205 and technical specification with 0.6 m long GI 100 mm dia drainage GI light grade pipe (For Bridges)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications: RCC Grade M20: Height upto 5m: With Batching Plant Transit Mixer and Concrete Pump

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Cement concrete (M-10) with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Preparing, watering and ramming surface for laying concrete.

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-25 grade, Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Extra for laying earth/ fly ash as per specification for compaction in 20 cm layers, dressing, watering & rolling to specifictions. Complete as all respects.

Supplying & laying dry brick ballast.

Cold twisted deformed bars fe 500 grade for RCC work where not included in the complete rate of RCC i/c bending binding and placing in position

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

Dismantling brick work tile, masonry or tile lining in cement.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-25 grade, Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

ASHOK KUMAR BANSAL GOVT CONTRACTOR (BID ID -599799)