PROVN OF CHAIN LINK FENCING AT OFFRS MD ACCNS WITH FAFA ACCNS AT SHILLONG AND REPAIR/REPLACEMENT OF ROOF SHEET OF BLDG NO BO 5 AND PROVN OF VEH WASHING POINT (RAMP) AND CEMENTED PLATFORM AND RENOVATION OF SRMO OFFICE AT HQ RTG ZONE SHILLONG AND PROVN

Amount

Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates, 75mm thick in foundation filling and mass concrete complete all as specified and directed.

S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply only MS galvanised chain link fencing any type & size as directed by Engr-in chargr.

Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified.

M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) as instiffnor in chain link fencing all as specified.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete.

Dismantling plain or corrugated steel sheeting , any guage, thickness incl nainital or similar pattern as in roof coverings.

Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling boarding any description fixed in any position with nails

S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

M&L for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed

Fixing only for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote oil complete all as specified and directed.

M&L 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

S&F for PVC (SWR) pipes (half round of 180 mm dia with rounded edges) as in eaves gutters including all fixing accessories such as bracket/clamp/clip/cleats/rubber ring joints in regular interval of 2 mtr, single socketed complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n,exc 1.5m wide and n,exc 1.5m depth for foundation, etc, n exc 10 sqm on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick in soils complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base and foundation filling mass concrete all as specified and directed.

M&L for PCC (1:2:4), type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete or in flooring including all necessary form work complete all as specified and directed.

M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as item No 34 above but 5 mm dia and over up to 10mm dia of steel bars as in stirrups, spacers, rings etc complete all as specified and directed.

M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Fair finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. complete all as specified and as directed.

S&F iron angle for aerial mast, water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.

S&F 20mm Gun metal, globe or gate vavles, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl 15mm dia of float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed.

M & L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate, exc 10cm width and setting in cement mortar 1:6 complete all as specified by Engr-in-Charge.

M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick over a coat of 10 mm thick base coat finished even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L for 2 Coats of cement base paint over a coat of primer incl prepration of newly plastered surface on wall.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete.

Taking down chowkhats or frames not exc. 1.5 sqm each

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed.

S&F 20mm bore curtain harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F brass chromium plated brackets for curtain harrison rails complete all as specified and directed.

S&F 30mm thick Flush shutters with one face is covered with decorative face veneer with lipping/frame to match, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F powder coated anodized aluminium frame for doors/windows /ventilators/, partitions with one or more rebates including joining cleats for fixing to existing tiled/concrete floring as required. etc complete all as specified and as directed. (Note : Any damage made to existing flooring with fixing frames shall be made good by contractor without any extra cost and match with existing flooring)

S&F Power coating, anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door 250/300mm long, hinges , anodised aluminium snap beading screws etc complete all as specified

S&F Powder coating anodised window and ventilator shutters sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked)

S&F Extruded Aluminium, anodised, bow handles of size 150mm.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.

S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F Sheet glass, 5.5mm thick ordinary quality transparent/black, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

M&L 6 mm plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M&L for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L 2nd class softwood plain fillets exc 13 n.exc 25 sqcm sectional area. square, rectangular or triangular in section, clean sawn, secured with nails or brads.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC/wood Frame as per specification and drawing.

M&L light shade virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, dados etc. set and jointed in neat cement slurry over & incluiding 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm dia concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/Fan point controlled by one switch.

Description all as per Srl item No. 67 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.67 here in before but for socket outlet point 5 Amp on same board.

Description all as per serial item No 67 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module, with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 16A 1 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed.

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

S & F wall mounted fan 230 volts, single phase 300mm sweep including making all electric connection complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Supply and install connect, test and commision , room air hot and cold type Condtioner split type 2 ton Capacity AC, 230 Volts +/- 10 % , 50 Hz supply conforming to amendements No-1 Suitable for floor, wall and ceiling mounting and additional parameters as given, capable of performing (i) Cooling & Heating (ii) De-humidifying (iii) Filtering (iv) Air circulating. all as specified including suction and liquid refrigerent pipe, suitable drain pipe, charging regrigerent stand / masonary platform for outdoor unit, complete all as specified and directed. Make:- LG/Bluestar/Carrier/ Voltas/ Godrej/ Samsung.

Supply & Fixing of insulated air conditioner copper pipe of suitable size for AC, complete all as specified and as directed.

Supply and fixing socket single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps , 240 volts and connecting up.

M/S K R DEY (BID ID -3415661)