REPAIR TO FLOORING JOINERY, ROOF SHEET, BATHROOM SANITARY FITTINGS AND REPAIR /REPLACEMENT OF INTERNAL WIRING, LED BATHROOMS, BULK HEAD LIGHT FITTINGS ETC AT APS DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each including iron mongries

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each including iron mongries

Taking down shutter of any description exe 1 Sq.m but n.exe 2.0 Sqm each

Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified by the Engr-in-Charge

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in road side parapet / Drain all as specified and as directed

All as per item No 8.00 but except stone complete all as specified and directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement including taking down cement plaster on brick or stone wall, etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster all as specified and as directed

Ditto as per item 10.00 above but in CM 1:6.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed all as specified and as directed

M&L preparation of new plastered surface of wall and applying two coat of oil bound distemper of any approved tint over a coat of primer complete all as specified and directed

M&L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed with cement mortar 1:6 complete all as specified.including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in cement mortar 1:6 complete all as specified including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Ditto as per item No 16.00 above but in skirting set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for 20 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps,jambs,pillars,windows cills,cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:6 ,complete all as specified. including dismantling old unsv granite stone.

Rounding to edges of stone slabs to one edge, such as in steps and other similar situations.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including waste coupling and waste pipe bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe etc complete all as specified.and directed

S&F in repair fancy type chromium plated stop valve 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified.

ditto as per item 22.00 above but 20 mm dia

S&F in repair fancy type chromium plated 15mm bore Bib taps, chromium plated cast copper alloy, fancy type, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.

Ditto as item No 24.00 above but long body

S&F in repair fancy type 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and directed.

S & F in repair for 15mm bore pillar tap fancy type, cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handle etc complete all as specified and directed.

S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified.

S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets and waste coupling , complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl PVC P or S trap 110 mm dia and making good to floor to match with adjoining surfaces including plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated of aluminium hinging device etc complete all as directed by Engr-in-Charge

S&F as in repair fixing WC Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) includung provision of lime concrete bedding and PVC S trap of 110 mm dia etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;including waste pipe, waste coupling and urinal spreader fixing with 15 mm dia pipe all as specified and directed

S&F in repair 10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed etc complete all as specified

S&F in repair PVC connection 15mm bore with PTMTnuts of length 450mm etc complete all as specified

S & F in repair 20mm dia,D type, 60cm long aluminum anodised towel rail, complete.

S&F in repair for 15 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, complete all as specified..

S&F for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 15mm bore.

ditto as per item 38.00 above 20 mmdia

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge

ditto as per item 40.00 above but 1000 ltr capacity

M&L for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified and as directed. (Reinforcement shall be measured separately) including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wall complete all as specified and as directed including taking up or down waste and vent pipes of any type complete.

Ditto as per item 44.00 above but 110 mm dia PVC (SWR pipe)

S&F in repair 75 mm dia PVC(SWR) floor trap, with grating including jointing with solvent cement etc complete all as specified.

S&F in repair PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

S&F in repair PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 35 mm thick factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete, all as specified .

S & F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats.

M&L 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed

S&F 100mm butt hinges, cold rolled mild steel medium weight

S & F for Aluminium anodized 150 mm long barrel tower bolt of extruded section and fixed.

S&F 100mm longth extruded aluminium alloy anodized handles febricated type

S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable existing complete all as directed.

S&F 250 mm long Aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete

M& L for PVC edge strip of 18/19 mm wide, colour and pattern as approved fixed with adhesive as per specified and as directed

S&F in repair Continuous (piano) hinges,mild steel, bright finish or elec trogalvanised , , bright finish width of flaps(when open) 30 mm complete all as specified.

S&F 100 mm long extruded stainless steel handle fabricated type anodised, complete all as specified.

S&F Hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified.

S&F magnetic steel stopper catcher holder for cup board of approprite shape and size all as directed

M&L for 18/19 mm Pre laminated particle boards,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails and fixed to wall with scews or necessary fixing arrangent complete all as specified and as directed including dsmantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards, kitchen cupboard including piano hinges and handle and cover fillets etc,, any thickness complete

S&F GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete including dismantling old U/S ceiling board any thickness including cover fillets all as specified and as directed.

M & L for 6 mmPlywood, grade BWR, type BB, fixed with screws to timber frame work all as specified including dsmantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards etc,, any thickness etc. including cover fillets complete.

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc6 & n. exc 13 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings including dismantling of scantling in any position complete all as specified

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified.

M&L preparation of old painted NTP/CGI/PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint as approved complete all as specified

Ditto as per item No 71.00 above but two coats of synthetic enamel paint of any tint as approved complete all as specified

S & F for 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

Ditto as per item 73.00 above but plain 0.63mm Galvanised, Mild steel roof sheet

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

Ditto as per item 75.00 above but plain pre- painted galvalume aluminum zinc coating GI based steel roof sheet.

S&F in repair 100mm MS butt hinges, cold rolled medium weight

S&F in repair150mm Aluminum anodised barrel tower bolts of extruded section

S&F in repair100mm extruded aluminium anodised alloy handles fabricated type

S&F in repair 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy

S & F in repair for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Hasp and staple of 100 mm size mild steel, wire type, stove enamelled black, including bolt to hingeplate and fixed with screws

M&L in repair for PVC tiles / sheets 1.50 mm thick laminated plain coloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors incl taking down old sheet complete all as specified & directed

M&L for cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials.

Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

M & L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC Casing-n-caping/Conduit of any size/dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-

One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

One two way point controlled by two, two way switches 06 Amps complete all as specified and directed.

All as per serial item No 87.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

All as per serial item No 87.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit concealed in walls by making cutting in brick/stone masonry wall of required size with all fittings and accessories, incl sunken boxes and hylem sheet alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the following :- Note : (i) The Switch, sockets shall be mounted on newly provided MS sunken boxes with in and incl 3mm thick hylem sheet of suitable size. (ii) The rate for sunken boxes, hylem sheet and all accessories shall deemed to be included in the quotes rates of the item itself. No seperate payment shall be made in this regard.

One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

All as per serial item No 90.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

All as per serial item No 90.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

S & F switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

S & F switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

S & F of socket outlet 3 pin, 06 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge

S & F of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge

S & F bell push flush type , 06 amps , 240 volts all as directed by Engr-in-Charge

S & F door bell ding dong type , 240 volts AC

S & F switch piano flush type, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge

S & F lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge

S & F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

M & L for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of or casing caping of suitable size as per site requirement, medium grade with all accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

-Ditto- all as per item No 102.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire complete all as specified & directed.

S & F in replacement sheet metal enclosure, Double door, SPN, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

-Ditto- all as per item No 104.00, but of size 08 way, Double door, SPN complete all as specified.

-Ditto- all as per item No 104.00, but of size 12 way, Double door, SPN complete all as specified.

S & F sheet metal enclosure, TPN, AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

S & F in repairs MCB, SP, AC, 240 volts B curve capacity of 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified & directed.

S & F in repairs MCB, DP (Double Pole), AC, 240 volts, B curve capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified & directed.

S & F in repairs MCB, DP (Double Pole), AC, 240 volts, B curve capacity 40 Amps to 63 Amps 10kA and making connections with suitable thimble complete all as specified & directed.

S & F in repairs Isolator 4 Pole 'C' series 63 amps capacity AC 415 V,10kA complete all as specified and directed.

M & L for taking down the unsv geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling the deposits in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. (Note:- (i) Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. (ii) Material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after) :-

S & F in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring of geyser, for 25/50 ltr capacity of Geysers.

S & F in repair of thermostatic switch 11 " long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and directed.

S & F in repair of geyser element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and directed.

S & F Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as directed by Engineer-in-Charge.

S & F in repairs 15mm dia PVC connection 450 mm long , suitable for hot water supply, complete with 2 Nos brass nuts complete all as specified and directed.

S & F in repairs 15mm dia PVC connection 450 mm long , suitable for cold water supply, complete with 2 Nos brass nuts complete all as specified and directed.

S & F in repairs of Zebra fastner of size 12x100 mm complete all as specified and directed .

S&F in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH, complete all as specified and directed

S&F in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH, complete all as specified and directed.

S & F in repairs LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F in repair/replacement to existing tube light fitting of any capacity with LED tube light fitting 18/20W, (single Side Connection) with rechargeable emergency invertor LED batten including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in repair/replacement to existing light fitting of any capacity with recess/ surface/ suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft-light and glare free symmetrical illumination, including all ace ssories for fixing in fall ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge. (As per existing Sample)

S & F in replacement to existing post top light fitting with LED 20 watt post top light fitting AC outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and 20 watt LED lamp all as specified and directed by Engr-in-Charge.

S & F in repair/replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specified and directed

S & F in repair/replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specified and directed

S & F (in repairs) 15mm dia 304 grade stainless steel connection pipe 450 mm long , suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and directed.

S & F (in repairs) 15mm dia 304 grade stainless steel connection pipe 900 mm long , suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and directed.

S&F in replacement distribution modular box with mcb protection Execution (pole) 4 Module and including 20 Amps rating MCB, single pole, AC, 240 volts with Specification IS:13032 & IS:8623, Dimension approx 46.5 x 42.8 x 26 Centimeters, PVC Plastic Material, White Color mounting on wall surface, complete all as directed by Engineer - in - Charge.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10.0 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0 metre apart including 4mm suspension GI wire from OH conductor to building incl dismantling taking down unserviceable one all as specified and directed.

All as per item No. 131.00 here-in-before but 6.0 Sqmm complete all as specified and directed.

S & F electric insulation tape heavy duty complete all as per specifed and directed

M & L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Amount of credit of Rs. 260618.32 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Vishal Builder (BID ID -3070909)

RR Builders (BID ID -3070451)

R. P. Suppliers and Construction Co. (BID ID -3069560)

Sagar Builders (BID ID -3065985)