SPECIAL REPAIRS TO BLDG NO. 02 (FAMILY WELFARE CENTRE) AT MIL HOSP AT KASAULI CANTT UNDER GE KASAULI

Amount

Dismantling plain or corrugated steel sheeting, any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified .

Second class hard-wood, timber fixed and clean sawn, in scantlings fixed in repair complete all as specified.

All as per serial item no 04 above but except timber.

Preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified.

0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with J Hook / L Hook in roofs, walls etc. with grade of zinc coating 275, complete all as specified.

0.63mm thick, plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified.

4 mm thick Non asbestos fibre cement building boards fixed in repair or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using second class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using second class hard-wood clean sawn in sectional area exc 06 sq.cm and not exc 13 sq.cm complete all as specified.

Preparation of New Non-AC ceiling board surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of white wash complete all as specified.

20mm thick boarding, second class hardwood, planed one side with butt joints, fixed with nails including dismantling old boarding complete all as specified.

Taking down chowkats or frames without taking down shutters, not exc. 1.5 sq. each complete all as specified.

Taking down chowkats or frames without taking down shutters exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down shutters of any description n exc 1 sq. m each complete all as specified.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified.

Second class hard wood factory made plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints fixed in repair complete all as specified.

35mm thick, second class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

35 mm thick second classs hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

30mm thick second class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; fitted to chowkats , windows, ventilators etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified.

Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Cold rolled mild steel medium weight butt hinges IS Marked 100mm size, complete all as specified.

Cold rolled mild steel medium weight butt hinge IS Marked 75mm size complete all as specified.

200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified

150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified

300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed in repair complete all as specified.

Demolition of cement concrete (unreinforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finishing the surface without using extra cement complete all as specified.

Rendering 10 mm thick in cement mortar 1:6 on rough faces of stone work or concrete surfaces including finishing the surface without using extra cement complete all as specified.

PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc,complete all as specified.

Extra for forming fair finished drain or channel 75 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc,complete all as specified.

Providing cement concrete 1:3:6 Type C1 (using 20mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Glazed coloured cermaic tiles Jointless of Size (300mmx450mm) x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified.

Non-Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc complete all as specified.

Coloured Prepolished chequered cement concrete tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

20mm thick granite slab ( of any type) work ( table rubbed and polished ) in platform,urinal portion and the like in CM 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB and counter over and including 20mm screed bed in CM 1:4 complete all as specified.

Machine cut kota stone slab flooring 18-20mm thick over and including 20 mm thick cement screed base 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Coloured vitrified ceramic tiles light shade10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in floor, finished even and smooth using extra cement complete all as specified.

Demolition of brickwork / stone work built in cement mortar including all quioins,arches, pillars etc complete all as specified.

Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius , built in CM (1:6) complete all as specified.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified.

All as per serial item No. 51 above but except stone. Note : Stone obtained from demolition of stone masnory shall be used.

Raised pointing to random or polygonal rubble (old or new), uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed in repair complete all as specified.

Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 15mm bore brass chromium plated pillar tap fixed in repair complete all as specified.

75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified.

1000 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantaling old water storage tank and removing from site complete all as specified.

Bib taps fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe, 15mm bore, fixed in repairs complete all as specified.

15mm bore Stop valves fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs complete all as specified.

15mm bore medium grade GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors fixed in repair complete all as specified.

20mm bore medium grade GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors fixed in repair complete all as specified.

110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repair complete all as specified.

Soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repair complete all as specified

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 complete all as specified.

1 mm thick white cemnt based wall care putty on walls complete all as specified.

Preparation of newly plastered surfaces of wall & applying two coats of oil emulsion distemper over one coat of chalk whiting complete all as specified.

Preparation of plastered or unplastered old surfaces of walls and applying one coat of cement based paint of any approved tint complete all as specified.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.

Preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size, fixed in repair complete all as specified. Make: Prayag Cat No. 8750 or its equivalent in the makes mentioned in Appendix 'B'.

Wall mixer, fancy type, chromium plated, non- telephonic 15mm bore including connected accessories fixed in repair complete all as specified. Make: Jaquar Cat No. FLR-5219N its equivalent in the makes mentioned in Appendix 'B'.

Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and flush pipe,fixed in repair complete all as specified.

Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm (minimum) white, incuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe fixed in repair complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified.

Welded steel wire fabric weight per square metre not exceeding 4 kg per sqm, fixed to wood or steel members complete all as specified.

Preparing new steel and iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.

Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide complete all as specified.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes & coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified.

4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sq. m in each pane fixed in repair complete all as specified.

75mm bore sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

75 mm bends (any radius) for cast iron pipe, diminishing pieces or tapers (larger bore measured) complete all as specified

PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.

Preparation of old plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper of approved tint complete all as specified.

25 mm dia curtain rods, mild steel powder coated with fixing metal ornamental holder and side finals (in pair for each door and window) as approved, fixing with PVC wall plugs and brass screws fixed in repair complete all as specified.

12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including aluminium anodised beading & rubber packing fixed in repairs complete all as specified.

Prelaminated particle board 19mm thick, exterior grade prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in wall panelling, fixed in repairs, complete all as specified.

Piano hinges mild steel bright finish width of flap 40mm fixed in repairs complete all as specified.

Hasp and staple 75mm size, safety type aluminium anodised including bolt to hinge plate to cup board shutter or kitchen cabinet shutters complete all as specified.

PVC (SWR) bends 110 mm dia any radius including necessary arrangement fixed in repair complete all as specified.

Taking down carefully copper / aluminium point wiring (light,fan,socket or power) complete,including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified.

Point wiring using approved colour coding as per IS with unsheathed FRLS copper conductor single core 1.5 sqmm (nominal area) PVC conduit (IS marked) including cutting chases and grouting concealed PVC conduit pipe, tee, elbow and bend etc in any type of wall and making good to match with existing surface with all connecting accessories including recess metal wall box (GI), PVC insulated and unsheated strandard copper, conductor FRLS grade single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly (switch and sockets shall be measured and paid separately) proper colour coding shall be maintained complete all as specified for the following:-

One light/fan point controlled by one way switch 5 Amps

One 3 pin socket outlet 6 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board.

Point wiring using approved colour coding as per IS with unsheathed FRLS copper conductor single core 4 sqmm (nominal area) PVC conduit (IS marked) including cutting chases and grouting concealed PVC conduit pipe, tee, elbow and bend etc in any type of wall and making good to match with existing surface with all connecting accessories including recess metal wall box (GI), PVC insulated and unsheated strandard copper, conductor FRLS grade single core of size 4 sqmm as earth continuity conductor to common earth and connecting to earth dolly (switch and sockets shall be measured and paid separately) proper colour coding shall be maintained complete all as specified for 3 pin 15 Amps socket outlet.

Switch piano flush type (IS marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified.

Switch piano flush type (IS marked), single pole, one way 16/15 Amps, 240 Volts complete all as specified.

Socket outlet 2/3 pin, 6/5 Amp piano flush type complete all as specified.

Socket outlet , 2 in 1, 3 pin 6 / 16 (5/15) Amp, piano flush type complete all as specified.

Ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623,III with IP 43 protection SPN 12 way, 240 Volts complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623,III with IP 43 protection TPN 4 way, 240 Volts complete all as specified.

MCB single pole having braking capacity 10 KA 6 to 32 Amps 240 volts C curve fixed in repair complete all as specified.

MCB SPN having braking capacity 10 KA 35-60 Amps, 240 Volts complete all as specified.

LED batten fitting 20 W with LED tube comprising of thermally conductive material prewired with high efficiency electronic driver, high translucent frosted diffuser for glare free smooth light distribution complete all as specified. Make : Crompton model No. LCCL B 20 -CDL or its equivalent in the makes mentioned in Appendix 'B'.

Wall Mounting LED fitting 9/10 watt 6000K 2 ft basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified. Make: Bajaj product code 112407 BCLSB 10 WH or its equivalent in the makes mentioned in Appendix 'B'.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to gaivanised earth lead wire 4.0 mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrate 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal , with suitable handle, excavation and earth work in any type of soil, including medium grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15 mm bore up to main board complete as shown in electrical plate No 3 MES schedule Part-I 2009, connected to earthing testing point including taking out existing unserviceable earthing and testing on completion complete all as specified. Note:- Units rate quoted shall include cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (medium grade) for watering 15mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:2:4 type B-1 cast iron frame and 40mm thick RCC cover for pit etc.

1100 volts grade heavy duty cable PVC insulated aluminium conductor 6 sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections PVC conduit pipe, tee, elbow and bend etc with clamps two twin core cable flat or circular including taking down the old unserviceable one complete all as specified.

Lamp Holder insulated body with back plate for batten fitting fixed in repair complete all as specified.

LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V,PF-0.95(min) fixed in repair complete all as specified.

Bulkhead luminaire decorative energy saving new generation 10W LED IP65 with opal diffuser with electronic driver complete all as specified. Make Crompton greaves cat No. LHBE-10-CDL or its equivalent in the makes mentioned in Appendix 'B'.

Varindera And Varindera Construction

M/S Vinod Kumar Bansal

Durga Construction

M/s Parmod Kumar

Vinod Kumar Aggarwal

PRITPAL SINGH

ADP Engineering