PROVN OF DG SET, ELECTRIC SUPPLY AND OTHER ANCILLARY WORKS INCLUDING ETP ROOM FOR 400 KLD ETP AT COMMAND HOSPITAL UNDER GE (E/M) LUCKNOW.

Amount

Sch 'A' Part-I (Building Work) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 6 siginifies this fact only.

Construction of plant operator room complete all as shown on drawings and as speicifed.

Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)

Total amount of Sch 'A' Part III (Internal Electrification)

Total amount of Sch 'A' Part IV (Internal Water supply )

Total amount of Sch 'A' Part V (Sewage Disposal)

Total amount of Sch 'A' Part VI (External Electrification)

Total amount of Sch 'A' Part VII (External Water Supply)

Sch 'A' Part - VIII (Miscellaneous Items) Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.

Point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and MS conduit in roof / floor slab, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.

Point wiring complete for one 5 pin 5 Amps switch socket out let point on an independent board with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and MS conduit in roof / floor slab, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.

All as per item No 7.01 but One 5 pin 5 Amp switch socket out let point on same board including 1.5 Sqmm PVC insulated and unsheathed copper wire to common earth and connecting to earth dolly.

Point wiring complete with PVC insulated and unsheathed FRLS cable 2.5 sq mm (nominal area ) ISI marked stranded copper conductor single core including ISI marked 20 mm dia PVC conduit concealed in wall and MS conduit in roof/floor slab, pressed GI concealed terminated boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete , including 1.5 sq mm FRLS cable PVC insulated and unsheathed copper earth wire to the common earth connecting to earth dolly, including colour coding of cable shall be phase-red, Neutral-black and Earth-green with all accessories complete all as specified and directed .

S&F mirror light fitting with clear glass complete with electronic ballast 220-240 Volts, with and including 1x36 Watts 'L' type CFL and making connection complete all as specified and directed.

Supply & fixing exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed.

Supply and fixing FTL fitting incl tube rode.nxt LED 18 Retro Bar Professional WH 5700K/CW 6500K. prewired including providing connection of size 23/.0076 of required length from ceiling rose to the tube light fitting complete all as specified and directed.

Supplying and fixing ceiling fan 1200 mm sweep AC 230 volt 50 hz with complete acceessories complete all as specified and directed.

M & L Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (11 metres long) with and including following. (a) Excavation in post holes in any type of soil returning filling ,well ramming and disposal of surplus soil to distance not exceeding 50 mtr from the starting point. (b) PCC 1 :3 :6 type C2 using 40 mm graded stone aggregate as in foundation including form work complete. (c) PCC 1 :2 :4 type B1 using 20 mm graded stone aggregate as in coping including form work complete. (d) PCC 1 : 4 : 8 type D2 using 40 mm graded stone aggregate as in base (e) Painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete , embeded portion shall be painted with two coat of black bituminus paint all as specified and directed.

Supplying and fixing with suitable nuts and clamps transperant and non mettalic SMC Kiosk box with 4 nos busbar aluminium 63 Amps 3 phase 4 wire 1 no & 10 MCB SP of size 300 x200 x 100 complete all as specified and directed.

M& L for horizontal boring holes under roads, pavement, hard standing and depth sould not be less than 1 metre from ground level by trenchless technology mechnacal / pneumatic method in and including HDPE PN-6 pipe of size 80 mm dia for laying of pipes / cables complete all as specified and directed

Supplying and fixing LED security light fittings 40 watt 5700K luminiare made out of pressure die cast aluminium housing IP 60 Protection and impact resisant IK 07 mounted on the top of the pole with cap type bracket having lenth not less than 0.31 mtr fixed with suitable fastener having extended arms length not less than 1.5 mtr and dia not more than 43 mm and angle between pole and extended arm should be 100 to 105 degree including fabrications works for fixing streer light made out of the same material as that of pole includig 3 core 1.5 sqmm copper cable from SMC box to street light fittings through pole complete all as specified and directed

M&L for lowering of submersible pump and connecting lead (submercible cable ) pump to LT Pannel for the controling of pump & column pipe of suitable dia and connecting the same to the first main hole (details of non submersible pump 2 nos working + 1 no Stand by pump in each lift well, Sumbersible cable, control pannel etc for complete of the following:- (a) Non clog vertical submersible pumps flow range 120 - 360 LPM, minimum 12 mtr head, 3 phase 415 V, 50 mm delivery size with CI impeller including installation with guide rail and lifting chain . Make kirloskar model 750 CW or eqvt make Notes (i) Rate is included for submersible cable of size 3 core 4.0 Sqmm from connection panel to pump complete. (ii) MS Header of size 150 mm of length 3 Mtr long with suitable size of NRV and buttterfly valve, 2 Nos of inlet connection of size 50 mm dia and 1 Nos of outlet of dia 100 mm . Contd.....

(iii) MS pipe ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes heavy duty of size 50 mm dia from pump delivery to MS Header connection complete all as specified and directed. (iv) Discharge pipe MS Medium Grade 100 mm dia from MS header to nearest manhole.

Supplying ,installing,testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase ,4 wire,415 volts,50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 including suitable automatic power factor corrector system and comprising of the following:. (For Main panel) Contd....

OUTER SHELL :-The outer shell shal be made out of 3.15 mm thick CRCA sheet steel & MS angle section 50x50x6 mm frame with front & back openable , double door system lockable/openable by keys from both sides having flush pattern fancy locks with louvers & air vent gasket for natural flow air.'U' type gasket shall be used to make the outer shell completely vermin proofd.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The outer shell shall be powder coated with pure polyster siemens grey structural RAL 7032 shade.The dimension of the outer shell should be adequate to accommondate inner shell described below giving 50 mm space all around & shall be fabricated in such a way that the whole inner shell alongwith its control gears & accessories could be taken outside without disturbing outer shell .The outer shell shall be mounted on a powder coated metal stand.Provision of threaded earthing stud & lifting lugs of suitable size at top to lift the feeder pillar safely shall be made . Contd....

Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone& skull shall be provided.The degree of ingress protection of outer shell shal be IP 54 INNER SHELL:-Inner shell made out of 2.0 mm thick CRCA sheet duly compartmentalized for each control gear,front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks92 Nos in each compartment )( having louvers & air vent gasket for natural flow of air 'U' type gasket shall be used to make the inner shall completely vermin proof & to accommondate incomer/outgoing MCCBs and TPN copper bus bar and extension links of rating not less than 1.5 times the rated capacity of the respective MCCB .The TPN bus bar and extension links shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made of nonhygroscopic,noncombustile,track resistance,high strength SMC material at suitable through out the length of the TPN bus bar. Contd......

Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone& skull shall be provided on the bus bar chamber.All control wires shall be with 2.5 sqmm multi strand copper conductor and shall be properly bunched ,Tied ,ferruled for proper identification and crimped with adequate size of lugs.The cubical shall have a bottom channel of size 75x490 mm duly coated with zinc metal coatimng .A detachable predrilled plate of thickness 3.15 mm powder coated should be used at the bottom.The inner shell shall be of powder coated siemens grey structural RAL 7032 shade.Indicating lamps LED type,230 volts,AC at the incomer of the unit to show three phase availability at the outgoing of incomer.An inspection lamp with 10 watt LED shall be fitted on top side of inner shell.The degree of ingress protection of outer shell shal be IP 42 & carry the following controls:-

One (1) Set of Phase Indication Lamp. L&T/ABB/SCHNEIDER Bus Bar : One (1) No. 100 A, TPN aluminimum bus bar of suitable length. HINDALCO/JINDAL/OR EQUALENT Outgoing : Phase indication lamps and Amp meter with ASS on each outgoing to be provided. THREE (3) Nos 3HP DOL STARTER WITH 16A TPN MCB , 4.5-7.5 A THERMAL OVER LOAD RELAY,ALONG WITH AMP METER ,SPP,AND ALL STANDARD ACCESSORIES PLC: PLC based for programing to run starters cyclic way, auto start and auto shutdown facility as required with all standard accesories. (i) Automatic start and strip of submersible pump based on mid level of sweage water in well switch on . , First pump based on mid level, 2 nd pump will come in option High sewage water level. (a) Only one pump will be in oprate when water level is betwwen low and mid level (b) Both pump will be in opration when sweage water level is more than mid level. .

(c) Alternative running of all pumps. Automatic start and stop of pump basd on sweage water level. NOTE :-Rates are including of sewage water Level detector complete incld wiring , All power contactor NO/NC contactor complete.

Supply, Installation, testing and commissioning of 'Silent type' Diesel Generating set having Prime power rating of 63 KVA(50 KW), 415 Volts at 1500 RPM, 0.8 Lagging power factor at 415 V suitable for 50 Hz, 3 Phase system and for 0.8 load factor and consisting of the followings:- Diesel Engine offered shall be as per specification and with following accessories: Diesel Engine 4 stroke Radiator based water cooled,turbo charge, electric start, of suitable BHP at 1500 RPM suitable for above output with alternator and suitable for Lucknow and at site condition conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation.The engine will be fitted complete with all the required accessories Contd.......

Common Bed Plate -Engine and alternator shall be directly coupled or coupled by means of flexoplate/ flexible coupling as per manufacturer standard design and both units shall be mounted on a common bed plate together with all auxiliaries to ensure perfect alignment of engine and alternator with minimum vibrations. The base channel frame shall be suitable for installation on suitable anti-vibration mounting system. Engine mounted Instrument Panel fitted with and having digital display forfollowing:Start- Stop switch with key (i) Start- Stop switch with key (ii)Water Temperature indication (iii) Lubrication oil pressure indication(iv)Lubrication oil temperature indication(v) Battery charging indication(vi) RPM Indication(vii) Over speed indication (viii) Low lub. Oil trip indication.(ix) Engine Hours indication FUEL TANK-As per OEM Contd......

Alternator: Synchronous alternator rated at 63 KVA, 415 Volts at 1500 RPM, 3 Phase,4 wire, 50 Hz, AC supply with 0.8 lagging power factor suitable for Lucknow and at site condition. The alternator shall have SPDP enclosure, brushless,continuous duty, self excited and self- regulated through elctronic AVR conforming to IS: 4722 / BS 2613 suitable for tropical conditions and with class F/H insulation. 12V / 24V DC starting system comprising of starter motors: voltage regulator and arrangements for initial excitation complete with suitable nos of batteries as required as per specifications.Accoustic and weather proof enclosure with arrangements for fresh air intake for cooling of the engine & alternator,extraction, discharging hot air in to the atmosphere as per specifications.Unloading, shifting & positioning of DG set.Site testing of DG set (The price shall include required quantity of diesel for site testing) Contd.....

DG PLC inbuilt panel & associated electrical works Supply, Installing, Testing and Commissioning of DG auto change over panel complete with all switchgear, control, protection and metering features as per specification suitable for 63 kVA silent type DG set complete with suitable MCCBs, relays, timers, set of CT's for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from panel to DG set and elsewhere if required, all complete failure to start lockout.Impulse counter with locking and reset facility.ON/OFF/Control circuit switch with indicator.Audio annunciation for 1. High water temperature. 2. Low lubricating oil pressure. 3. Engine Over speed. 4. Engine fails to start 5. Full load / max. load warning. Contd......

Exhaust System: Supply, installation, testing and commissioning of following MS exhaust piping, hospital grade heavy duty class-C complete with all accessories such as bends flanges, flexible connections at a suitable distance etc. and insulated with75 mm thick layer of LRB rock wool having 144 kg/m3 density, cladding with 0.63 mm aluminium sheet all-round the exhaust pipe complete as required at site

S & F HDPE (high density polyethylene) stop / gate valve ,PRESSURE RATING PN10, complete with iron wheel head, socket both ends for pipe of 20 mm size complete all as specified and directed.

S & F HDPE (high density polyethylene) stop / gate valve ,PRESSURE RATING PN10, complete with iron wheel head, socket both ends for pipe of 50 mm size complete all as specified and directed.

Construction of brick masonary valve pit of size 600 x 600 x 900 mm (internal demension) complete with 50x50x6mm angle iron frame, with 3.15mm thick MS sheet cover, angle iron frame duly painted with locking arrangement incl all frame duly painted with locking aggrangement incl necessary excavation and earth work, PCC work complete all as specified and directed.

Supply , installation, connecting and testing Pumping set, Centrifugal, electric driven squirrel cage motor , AC 415 volt three phase complete 5 HP fixed on same base and connected by coupling inclusive of suitable capacity of starter, panel and suiatble PCC foundation in and including XLPE insulated armoured multistanded Aluminium of 6 sqmm 4 core from panel to starter and starter to motor complete all as specified and directed .

Supplying and fixing foot valve 50 mm dia PVC RPI complete all as specified and directed.

Supplying and fix Non Return Valve brass type 50 mm dia complete all as specified and directed.

Shree Tirupati Associates