SPECIAL REPAIR TO BLDG NO T197 T198 AND T199 AT MES OFFICE COMPLEX OF AGE BR-II JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F rolled mild steel work in tubular trusses, purlins etc. including special shaped etc complete using ERW or induction butt welded tubes conforming to Gde St-240 and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws (for Ridge) complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing of designer ceiling board of size 600 x 600x4mm thick pre-painted ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid system with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maxiumum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of feach main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200 mm long cross tee (with double stitching) to be interlocked between main renders at 600mm to be supoorted independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, Permimeter wall angle shall be of 0.45mm thick GS sheet, complete all as specified and directed. (Make : Saint Gobain, Everest)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) and rubbish off the premises complete all as specified and directed

M & L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on stone masonry surfaes or surface other than fair faces of brick work or concrete surfaces in cement plaster 1:3 complete all as specified and directed

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

M & L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick in CM (1:6) complete all as specified & directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick area of each exc 0.06 sqm but nexc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or colour cement to match incl screed bed 20 mm thick in CM (1:6) complete all as specified and directed

M & L for laying broken stone or boulders hardcore of guage not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick watered rammed and consolidated to a true surface complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement including forming joint to full depth at every 3.0 mtr interval and every change of direction and filled with mixture of bitumen and sand (1:3) by weight complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified.

S & F pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F factory made second class hard wood shutter, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed.

S & F 35 mm thick factory made plain shutters second class hardwood rails and style, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically presurre treated complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one priming coat of pink primer complete all as specified & directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

S & F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100 mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1 mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 40x6 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar , Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (incl 4.8 mm thick Sheet glass, ordinary quality and glazing with metal frame with beading in square exc 0.5 sq.m in each pane and wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire mesh size 12 mm x 12 mm staples) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (ncl 4.8 mm thick Sheet glass, ordinary quality and glazing with metal frame with beading in square nexc 0.5 sq.m in each pane). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even including using water proofing compound @ 3% all as specified and directed. (Note : WPC will be measured and paid for separately)

M & L for preparation of new plasterd surface of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of 100% required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.50 litre/10 sqm over new surfaces complete all as specified and directed

M & L rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including applying 1 mm thick wall care putty on wall surface complete all as specified and directed.

M & L for preparation of new plastered surfaces on walls, priming plastered and other surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed.

M & L for taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M & L for 25mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for taking up or down 20mm bore steel tubing and connections, including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth cleaning for refixing or removal to store complete all as specified and as directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for taking up or down 15 mm bore steel tubing and connections, including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth cleaning for refixing or removal to store complete all as specified and as directed.

M & L in repair for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 10 litres flusing cistern and flushing pipe (exclusive of brackets), including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and including flush pipe of PVC 32 mm dia pipe 600 mm long complete all as specified and directed.

S & F in repairs 15 mm bore dia fancy type, stop valves, chromium plated, cast copper alloy, screwed down, high pressure, with long shank and cup, crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed

S&F in repair for ISI marked 15mm bore dia fancy type Bib taps, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 20mm bore complete all as specified and directed.

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S&F in repair CP Soap dish 100mmx50mm complete all as speicified and directed

S & F in repairs 125 mm brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair Grating doom 100 mm dia of CP (Min weight 25 gms) complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F in repair 75mm bore PVC (SWR) bends of any radius, complete all as specified

M&L in repair PVC (SWR) floor trap of diameter of outlet in 110 mm, plain with grating including jointing with solvent cement , complete all as specified

M&L in repair PVC (SWR) floor trap of diameter of outlet in 75 mm, plain with grating including jointing with solvent cement , complete all as specified

M&L in repair PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement , complete all as specified

S & F PVC (SWR) junction single, (Single T) equal 110 mm complete all as specified

S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F Roller blind curatin for window HDPE corded 95 % sun & UV protection, Air Flow Design Light filtering rol-up fixed on window match with finishing complete all as specified and directed by Engineer-in-charge

S & F in repairs 15 mm brass chromium plate wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F rotational moulded polyethylene water storage tanks 1000 litres capacity triple layers (cylindrical vertical with closed top) hoisted and fixed in position incl float valve incl dismantling complete all as specified and directed in SSR Part-I.

S & F vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper including erecting stand (pedestal) brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Providing of anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., complete all as specified.

Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified.

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe, etc., complete including making good to floor complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including teak wood lipping 19 x 6mm thick fixed with nails complete all as specified and directed.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

S&F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt Weight per square metre nexc 4 kg

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Providing Cement concrete Type B1 1 : 2 : 4 (20mm graded aggregate) as in benching, haunching of manholes, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of cement concrete(reinforced Concrete) in any position not otherwise specifically provided for of any description and complete all as specified and directed.

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

M & L for providing reinforced cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in landing, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed

M&L Mild steel TMT bars 6mm to 8mm dia and over (and flat iron where quered),cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips or welded to flat iron complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation as cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block (coloured red/yellow) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

M&L for machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm (coloured red/yellow), jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down old MCB DB of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.

Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

- Ditto - all as per item No -99 above but one call bell point controlled by one bell push point.

- Ditto - all as per item No -99 above but for one 3 pin 5 Amp socket on same board all as directed.

- Ditto - all as per item No -99 above but for one 3 pin 5 Amp socket on indipendant board all as directed.

- Ditto - as per item No 99 here in before but with 2.5 sqmm copper conductor for 16 Amp socket with 1.5 sqmm earth continuity conductor.

S & F of Modular snap switch SP, one way ,5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular Bell push ,SP 5/6 A suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5 pin, 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F of Modular snap switch SP one way ,15/16 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5/6 pin ,15/16 Amps suitable for 2 Module complete all as specified and directed.

S & F of Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed.

S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.

S & F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 8 module complete all as specified and directed.

All as per Item No-111 above but 6 module complete all as specified and directed.

All as per Item No-111 above but 3 module complete all as specified and directed.

All as per Item No-111 above but 2 module complete all as specified and directed.

S & F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.

Supply and fixing of lamp holder insulated body with back plate suitable for any type of fitting complete all as specified and directed.

Supply and fixing of LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl taking out old unsv CFL/LED Bulb. Complete all as directed.

S & F of Electric bell, AC, 230volts, single phase, Ding Dong type complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete connector block complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, MCB DB 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.

All as per item No: 122 here in before but MCB DB SPN 12 way complete all as directed.

S & F of isolator DP, 63 Amp, 230 Volt.

S & F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.

Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth for foundation, laying of cable, pole etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been errected and tested , all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge.

Supply and laying dry river sand to be laid in 8 cms before laying of cable and 15 cms above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured.

Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 16 Sqm 2 core size including taking out unserviceable complete all as specified and directed.Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .

M&L for Painting of ceiling fans/Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work complete all as directed.

Supply, laying, connecting & testing of 40 mm bore steel water tubing galvanized medium grade, with all fittings & fixtures (ISI marked) laid in trenches or fixed along walls or in any position complete all as specified and as directed .

Deduct Schedule of Credit of Rs. (-) 187868.28 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

K S BUILDERS (BID ID -3473534)

MAHADEV ENTERPRISES (BID ID -3476193)

PARAS RAM ASGOTRA AND SONS (BID ID -3474776)

NARESH KUMAR KHAJURIA (BID ID -3477255)

MADAN LAL SHARMA AND SONS (BID ID -3477376)

M/S SHARMA TRADERS (BID ID -3476438)

MandeepConstructionCo (BID ID -3475730)

M/S SANJAY STEEL WORKS (BID ID -3475905)

M/S MAHALUXMI BUILDERS (BID ID -3476881)

M/S. RAM PAUL KHAJURIA & BROS. (BID ID -3476909)