Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹2.3 L
Closing Date
17 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (For details refer tender documents)
Similar nature of works means: Construction/ repairs/ maintenance of any Civil Engg. Works
30 conditions · 2 needing a document upload
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
Provision of amenities for Divyangjan and passangers with reduced mobility at different stations under the jurisdiction of ADEN/Sett/KUR of Khurda Road Division
eTender-hq-kur-297-2025~ECOR
eTender-hq-kur-297-2025
Open
Works - General
6 Months
Khordha, Odisha
₹0
₹2.3 L
17 Dec 2025
25 Nov 2025
3 Dec 2025
72 items across 1 schedule · ₹1,57,25,158.16 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 135 | 260.3 | 35,140.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 60 | 196 | 11,760 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum 106.8 | — | 2,123.75 | 2,26,816.5 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 238.95 | — | 7,878.5 | 18,82,567.58 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 24 | 7,178.75 | 1,72,290 |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 27.5 | 6,812 | 1,87,330 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 112 | 392.15 | 43,920.8 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 176 | 927.25 | 1,63,196 |
| 9 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 280 | 736.4 | 2,06,192 |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 120 | 961.3 | 1,15,356 |
| 11 | Under 20 cm wide | Metre | 120 | 208.55 | 25,026 |
| 12 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 8 | 951.1 | 7,608.8 |
| 13 | 50 mm thick | Sqm | 2.4 | 1,886.9 | 4,528.56 |
| 14 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 6500 | — | 107.85 | 7,01,025 |
| 15 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 6000 | — | 107.85 | 6,47,100 |
| 16 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 52 | 9,504.75 | 4,94,247 |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 48 | 9,860.4 | 4,73,299.2 |
| 18 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 28.8 | 733.5 | 21,124.8 |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 96.5 | 7,132.25 | 6,88,262.13 |
| 20 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 64 | 8,752.55 | 5,60,163.2 |
| 21 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) | Sqm | 100 | 1,105.8 | 1,10,580 |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 160 | 1,267.95 | 2,02,872 |
| 23 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 200 | 238.35 | 47,670 |
| 24 | Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). | Sqm | 6.4 | 8,298.85 | 53,112.64 |
| 25 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg 1300 | — | 772.4 | 10,04,120 |
| 26 | Medium shade pigment using 50% white cement and 50% ordinary cement | Sqm | 90 | 1,507.1 | 1,35,639 |
| 27 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 12 | 1,328.35 | 15,940.2 |
| 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 48 | 1,096.55 | 52,634.4 |
| 29 | Size of Tile 600 x 600 mm | Sqm | 100 | 1,464.85 | 1,46,485 |
| 30 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm 112.5 | — | 3,186.7 | 3,58,503.75 |
| 31 | 110 mm diameter | Metre | 40 | 377.4 | 15,096 |
| 32 | 110 mm | Each | 16 | 127.6 | 2,041.6 |
| 33 | 110x110x110 mm | Each | 16 | 234.15 | 3,746.4 |
| 34 | 110x110x110 mm | Each | 16 | 221.35 | 3,541.6 |
| 35 | 110 mm bend | Each | 16 | 150.35 | 2,405.6 |
| 36 | 110 mm Shoe | Each | 16 | 131.85 | 2,109.6 |
| 37 | 1:6 (1 cement: 6 fine sand) | Sqm | 320 | 333.35 | 1,06,672 |
| 38 | 1:6 (1 cement: 6 fine sand) | Sqm 298.7 | — | 383 | 1,14,402.1 |
| 39 | 1:3 (1 cement : 3 fine sand) | Sqm | 168 | 300.45 | 50,475.6 |
| 40 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 328 | 262.7 | 86,165.6 |
| 41 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 328 | 185.65 | 60,893.2 |
| 42 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm 10363.7 | — | 160.6 | 16,64,410.22 |
| 43 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 400 | 171.1 | 68,440 |
| 44 | Two or more coats on new work | Sqm | 160 | 155.9 | 24,944 |
| 45 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm 10305 | — | 25.15 | 2,59,170.75 |
| 46 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum 228.05 | — | 2,434.25 | 5,55,130.71 |
| 47 | In cement mortar | cum | 4 | 2,060.2 | 8,240.8 |
| 48 | For thickness of tiles above 25 mm and up to 40 mm | Sqm 77.17 | — | 113.35 | 8,747.22 |
| 49 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm 139.75 | — | 266.45 | 37,236.39 |
| 50 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum 231.5 | — | 263.95 | 61,104.43 |
| 51 | Moorum | cum | 80 | 768.25 | 61,460 |
| 52 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm 1429.5 | — | 2,017.6 | 28,84,159.2 |
| 53 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 4 | 6,767.4 | 27,069.6 |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 24 | 3,960.55 | 95,053.2 |
| 55 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | 32 | 1,648.95 | 52,766.4 |
| 56 | Rectangular shape 453x357 mm | Each | 24 | 1,361.8 | 32,683.2 |
| 57 | C.P. brass | Each | 12 | 803.7 | 9,644.4 |
| 58 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 4 | 168.35 | 673.4 |
| 59 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 8 | 14,999.15 | 1,19,993.2 |
| 60 | PN - 10 Pipe, 50 mm OD (SDR-11) | Metre | 400 | 450.95 | 1,80,380 |
| 61 | 15 mm nominal dia Pipes | Metre | 80 | 497.8 | 39,824 |
| 62 | 20 mm nominal dia Pipes | Metre | 60 | 537.6 | 32,256 |
| 63 | 25 mm nominal bore | Each | 8 | 622.4 | 4,979.2 |
| 64 | 50 mm nominal bore | Each | 4 | 1,026.65 | 4,106.6 |
| 65 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per 4000 Litre | — | 11 | 44,000 |
| 66 | 15 mm nominal bore | Each | 20 | 506.8 | 10,136 |
| 67 | 15 mm nominal bore | Each | 8 | 798.95 | 6,391.6 |
| 68 | 15 mm nominal bore | Each | 32 | 670.45 | 21,454.4 |
| 69 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 4 | 111.45 | 445.8 |
| 70 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 8 | 2,707.65 | 21,661.2 |
| 71 | Frame size 65 x 125 mm | Metre | 40 | 1,381.6 | 55,264 |
| 72 | 35 mm thick | Sqm | 16.8 | 5,432.85 | 91,271.88 |
| Schedule total | ₹1,57,25,158.16 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .