Loading
Loading…
Loading…
Tender Value
₹3.3 L
EMD Value
₹6,700
Closing Date
29 Jul 2026, 12:00 pm3d left
Er. Chander Shekhar
Office of the Executive Engineer, Electrical Division No. 3 Sector-4, Chandigarh.
MAINTENANCE OF E.I. IN NRB AT CHANDIGARH (PROVIDING SUITABLE ARRANGEMENTS FOR ENHANCEMENT OF ELECTRICITY LOAD OF FEEDING SYSTEM FOR AC INSTALLED AT BAR COMPLEX, PUNJAB AND HARYANA HIGH COURT, SECTOR-1, U.T., CHANDIGARH)
2026_CHD_93936_1
E3/47W/75
Open Tender
Electrical Works
Percentage
15 days
Chandigarh
AS PER NIT
2 documents required · 2 mandatory
₹0
₹6,700
29 Jul 2026
10 Jul 2026
29 Jul 2026
10 Jul 2026
29 Jul 2026
10 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DSR 10.7 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. | |||||
| 1.01 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) | 490 | P.Mtr. | 180 | ₹88,200 |
| 1.02 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) | 480 | P.Mtr. | 271 | ₹1,30,080 |
| 2DSR 2.2Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. | |||||
| 2.01 | 315 A, 35 KA,TPMCCB | 2 | Each | 22,644 | ₹45,288 |
| 2.02 | 400 A, 35 KA,TPMCCB | 2 | Each | 22,644 | ₹45,288 |
| 3DSR 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | |||||
| 3.01 | 3½ X 185 sq. mm (57mm) | 4 | Each | 1,001 | ₹4,004 |
| 3.02 | 3½ X 240 sq. mm (62mm) | 4 | Each | 1,160 | ₹4,640 |
| 4 | Fabrication, Supply, erection, testing & commissioning of Outdoor pillar type enclosure for 315A-400A MCCB 3 pole made out of 16 gauge MS Sheet and legs made out of angle iron of suitable size and length. The enclosure should have end termination box at the top and bottom both side of the enclosure of suitable size to accommodate upto 3 ½ x 300 sq mm XLPE/PVC arm. Al. conductor cable. The job including the fabrication of base for erection of MCCB alongwith all labour & petty material required to complete the job in entire satisfaction of EIC. | 2 | Each | 6,500 | ₹13,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 22.21 MB
BOQ_115120.xls
BOQ • 0.24 MB
extend3.pdf
PDF • 0.42 MB
extend2.pdf
PDF • 0.47 MB
extend1.pdf
PDF • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].