REPAIR/MAINT OF TOILET, JOINERIES, PLUMBING, PLASTERING AND OTHER WORKS IN WSA COMPLEX AND REPAIR/MAINT OF LT DISTRIBUTION SYSTEM INCLUDING REPLACEMENT OF DISTRIBUTION PANELS AND ASSOCIATED WORK IN OTM ACCN IN TECH AREA AT AF STN HASIMARA

Amount

Supply and fix in repairs, vitreous china wash down water closet pan and trap EWC (pedestal pattern), white with plastic seat cover including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, fixing bolt etc. and making good damaged portion, complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve and bracket etc, complete all as specified and directed including taking out old one, complete all as specified and as directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms), complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and as directed.

S&F steel tubes, galvanised 15mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc, complete as specified and as directed.

S&F steel tubes, galvanised 20mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc, complete as specified and as directed.

Cutting chases, pinning in making good and pointing in cement mortar (1:3) to facings brick wall where required,exc 10cm but not exc 20cm girth, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded polythene water storage tanks triple layer (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling/taking down or u/s water tank of any description, complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polythene water storage tanks triple layer (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling/taking down or u/s water tank of any description, complete all as specified and as directed.

S&F in repair gun metal gate valve 20mm bore with iron wheel screwed both ends for iron pipes, complete all as specified and as directed.

S&F vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises , complete all as specified and as directed.

M&L for providing 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as specified and as directed.

M&L for providing 10mm thick plaster in CM (1:3) on brick work for fixing wall tiling, complete all as specified and as directed.

M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, complete all as specified and as directed.

M&L for 450x300x7mm thick glazed ceramic coloured tiles on vertical surface set in neat cement slurry and pointed in white or coloured cement, complete all as specified and as directed.

Material and labour for Non skid ceramic tiles 7 to 8mm thick area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neae in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement, complete all as specified and asdirected.

M&L for 75mm thick plain cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in sub base to floor surfaces finished, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing rubbish off the premises, complete all as specified and directed.

Dismantling fencing, wire mesh, any type including fillets and removing from site, complete all as specified and directed.

Supply only chain link fencing made out 4mm dia galvanised iron wire of mesh 75mm x 75mm / 100mm x 100mm size made up to into mattress or cages, complete all as specified and as directed. Note :- Pre meter weight of chain link brought by the contractor shall be fixed through a BOO.

Fixing only new chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc., complete all as specified and as directed.

Straining & fixing old chain link fencing including any type of standards, rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed.

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each srewed end to be fixed with one washer and one hexagonal nut, the other end to be embeded in RCC fencing post while casting for chain link fencing, dia of bolt 11 to 15mm and length of bolt exc 5cm but n exc. 10cm long, complete all as specified and as directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rail and fastening and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc Fe 410w (Gde E-250), complete all as specified and as directed.

M&L for mild steel round bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hoping as in tie bar for fixing chain link fencing, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exc 1.5m in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil, complete all as specified and as directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft loose soil, complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Material and labour for local fine sand filling in trenches including spreading and levelling for cushioning of underground cables, complete all as specified and as directed.

M & L for best quality locally available, sub class B bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of the cable, complete all as specified and as directed.

Material & Labour galvanized iron tubing 80mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and as directed. (Note : Excavation and earth work will be measured and paid separately)

All as per item No. 34 here in above but 100mm bore (light grade), complete all as specified and as directed.

Taking down/out unserviceable UG cables of cross sectional area up to 120 sqmm and connections including bricks, GI pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles, complete all as specefied and as directed.

Taking down/out unserviceable UG cables of any cross sectional area and connections including bricks, GI pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles and relaying the cable after repair/ replacement of LT joint including connecting to the DB/Panel etc complete all as specefied and as directed. Note : Rate for earth work and bus bar Joint will be measured and paid seperately in the respective item of schedule.

S&F pole mounted busbar chamber 63 Amp, 4 way of suitable size with set of 04 copper busbar and cable terminals each of heavy duty stand lock with suitable size of brass nut, bolts and washer and cable gland, fixing clamp, angle iron frame work etc, complete all as specified and as directed. Make : Havells cat part No IHBC006306 or equivalent of model of make ABB/L&T/Schneider

All as per item No 38 here in above but 100 Amp, 4 way, complete all as specified and as directed. Make Havells cat part No IHBC010006 or equivalent of model of make ABB/L&T/Schneider

Materials and labour XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 70 sqmm 3.5 core, complete all as specified and as directed. Note : Excavation and earth work will be measured and paid separately under respective items (Make : HAVELLS / GLOSTER / POLYCAB/ KEI)

All as per item No 40 here in above but sectional area 95 Sqmm 3.5 core, complete all as specified and as directed.

All as per item No 40 here in above but sectional area 120 Sqmm 3.5 core, complete all as specified and as directed.

All as per item No 40 here in above but sectional area 185 Sqmm 3.5 core, complete all as specified and as directed.

All as per item No 40 here in above but sectional area 240 Sqmm 3.5 core, complete all as specified and as directed.

M & L for horizontal boring under the road below 1m from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including DWC pipe of 100mm dia suitable for 0.4 mpa working pressure. Note: Cost of DWC pipe shall be included in the quoted rate

Supply, fabricating, installing, testing and commissioning of Outdoor type LT feeder pillar box of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15 mm thick CRCA sheet mounting on 50x50x5mm Angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus Bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at 155 Sqn sub stn & main guard room (a) INCOMING (i) MCCB 250 Amps, AC 4 pole 415 Volt 36 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make:Havells cat part No IHLFEN40250 or equivalent model of make ABB/L&T/Schneider (b) OUTGOING (ii) MCCB 160 Amps, AC 4 pole 415 Volt 35 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make : Havells cat part No IHLFEN40160 or equivalent (iii) MCCB 125 Amps, AC 4 pole 415 Volt 35 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make : Havells cat part No IHLFEN40125 or equivalent model of make ABB/L&T/Schneider (iv) Isolator Four pole 80 Amp - 04 Make : Havells Cat Part No DHMZIFPX080 or equivalent model of make ABB/L&T/Schneider (v) MCB SPN 63 Amp - 08 Make : Havells cat part No DHMZCSNF063 or equivalent model of make ABB/L&T/Schneider (vi) Digital voltmeter with all accessories for incoming Make : AE or equivalent in L & T /Schneider/ ABB (vii) Digital ammeter with all accessories for incoming Make : AE or equivalent in /Schneider/ ABB (viii) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections of Make : AE, L&T, Schneider

Supply, fabricating, installing, testing and commissioning of Outdoor type LT feeder pillar box of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15 mm thick CRCA sheet mounting on 50x50x5mm Angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus Bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at WSA (a) INCOMING (i) MCCB 250 Amps, AC 4 pole 415 Volt 36 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make : Havells cat part No IHLFEN40250 or equivalent model of make ABB/L&T/Schneider (b) OUTGOING (ii) MCCB 160 Amps, AC 4 pole 415 Volt 35 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make : Havells cat part No IHLFEN40160 or equivalent model of make ABB/L&T/Schneider (iii) MCCB 100 Amps, AC 4 pole 415 Volt 35 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor based, - 02 Nos with suitable rotary extendable handle for operation of MCCB Make : Havells cat part No IHLFEN40125 or equivalent (iv) Isolator Four pole 80 Amp - 04 model of make ABB/L&T/Schneider Make : Havells Cat Part No DHMZIFPX080 or equivalent model of make ABB/L&T/Schneider (v) MCB SPN 63 Amp - 08 Make : Havells cat part No DHMZCSNF063 or equivalent model of make ABB/L&T/Schneider (vi) Digital voltmeter with all accessories for incoming Make : AE or equivalent in L & T /Schneider/ ABB (vii) Digital ammeter with all accessories for incoming Make : AE or equivalent in /Schneider/ ABB (viii) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections of Make : AE, L&T, Schneider

M & L earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 25 x 4mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1, using (20mm graded crushed stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, 40mm dia light grade GI pipe for lead protection in & including alternate layers of char coal dust and common salt complete all as shown in electrical plate No 5 and connected to earthing test point all as specified and indicated including testing on completion and marking of description of earthing on GI plate grouted on the earth chamber, complete all as specified and as directed. Note: An amount of Rs.60035.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ANNI ENTERPRISE

M/S ASHOK ENTERPRISE

M/S ANIL KUMAR BAUL

M/S P K AGARWALA

M/S DEY ENTERPRISE

M/S BISHAL ENTERPRISES