REPAIRS TO LEAKAGE, SEEPAGE AND REPAIRS TO JOINERY, ROLLING SHUTTERS TO CERTAIN BUILDINGS AT 2 AFSB MYSORE

Amount

Taking down chowkats or frame with shutter (without taking off shutter from frame) area not exceeding 1.5 sqm each all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof coverings including ridges complete all as specified and as directed.

Taking down cement plaster of any description from wall/ceiling and roof slabs including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete all as directed.

Taking up or down 15 mm bore mild steel galvanised tubing with all fittings and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore mild steel galvanised tubing with all fittings and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply and fix 35mm thick second class hard wood, glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc., edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ gauze complete all as specified and directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fixed to chowkats all as specified and directed.

Supply and fix solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing

Supply and fix factory made solid panel PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded pre laminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawing and as directed

Supply and fix butt hinges, 100mm size, medium weight, cold rolled mild steel all as specified and directed

Supply and fix 75 mm long aluminium anodised barrel tower bolts of extruded section and fixed, all as specified and directed

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, all as specified and directed

Supply and fix 75 mm long extruded aluminium alloy handles, cast type, anodised all as specified and directed

Supply and fix 100 mm long extruded aluminium alloy handles, cast type, anodised all as specified and directed

Supply and fix 150 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

Supply and fix floor door stopper, overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring all as specified and directed

Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fix in repairs butt hinges, 75mm size, medium weight, cold rolled mild steel all as specified and directed

Supply and fix in repairs butt hinges, 100mm size, medium weight, cold rolled mild steel all as specified and directed

Supply and fix in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, all as specified and directed

Supply and fix in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

Supply and fix in repairs floor door stopper, overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring all as specified and directed

Supply and fix in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed

Supply and fix in repairs aluminium (Diecast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as directed.

Supply and fix in repairs harrison rails, mild steel chromium plated with fixing brackets, stops, rollers etc.. all as specified and directed

Supply and fix in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

Material and labour for repairs, servicing, easing, adjusting existing collapsible steel gates of any description including necessary welding and securing runners position/replacing old runners if required, greasing/ oiling etc for smooth functioning, complete all as specified and directed.

Material and labour for taking down hood covers of gear operated rolling shutters of opening width exceeding 4.00 m and height exceeding 5.00 m, keeping shutter for repairs, removing old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels and cleaning all the parts specified here in before, tightening of shutter strips / other parts, greasing/oiling of all moving components including springs, minor welding works if required and replacement of worn out/unserviceable parts of rolling shutter for proper functioning complete all as specified and directed.

Material and labour for taking down hood covers of gear operated rolling shutters of opening width not exceeding 4.00 m and height not exceeding 5.00 m, keeping shutter for repairs, removing old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels and cleaning all the parts specified here in before, tightening of shutter strips / other parts, greasing/oiling of all moving components including springs, minor welding works if required and replacement of worn out/unserviceable parts of rolling shutter for proper functioning complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on concrete surfaces over roof slab mixed with water proofing liquid as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid separately as supply only item here in after

Supply only liquid water proofing compound all as specified and as directed.

Material and Labour for applying oil bound bituminuous primer @ 0.20 kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/sqm, reinforced with non polyester matt weighing not less than 160 gms/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5 cm in longitudinal and transverse directions respectively, reinforcement tearing strength of 180 N, laid over roof slab and bonded to the sub strata by heat process by flame torch application with and including minimum 10 cm side over lap and 15 cm end over lap, sealed/fused by flame torch application as per manufacturer's instructions, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /sqm and finally applying solar reflective bituminous aluminium paint @ 0.10 kg/Sqm over the membrane complete all as specified and directed.

Material and labour Cutting out cracks to V-section in existing roofs, cleaning out wetting, grouting with cement and sand slurry 1:1 with water proofing compoundcomplete all as specified and as directed.

Material and Labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Material and Labour for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Material and labour for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix sheet glass, 4.0mm thick ordinary quality & glazing with oil putty in squares not exceeding 0.50 sqm each pane complete all as specified and as directed

Supply and fix figured sheet glass, 4.0mm thick pin head type & glazing with oil putty in squares not exceeding 0.50 sqm each pane complete all as specified and as directed

Fixing only 15 mm bore old steel tubing and connections in new or old position including fittings (Walls, ceiling, floors, etc., old steel tubings obtained from taking up/down shall be reused) complete all as specified and as directed.

Fixing only 20 mm bore old steel tubing and connections in new or old position including fittings (Walls, ceiling, floors, etc., old steel tubings obtained from taking up/down shall be reused) complete all as specified and as directed.

Supply and fix in repairs 20mm bore dia Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position for tank capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Material and labour for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Maruthi constructions

S S BUILDERS

G K CONSTRUCTIONS