Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹35.5 LAccepted-AOC D 9 NETAJI NAGAR KANTATOLI COLONY RANCHI 834001 | RANCHI | RANCHI | JHARKHAND | 834001 | 1 | Accepted-AOC ok | |
| 2 | 2₹38.9 L+₹2.9 L (8.15%)Rejected-Finance C O MANOJ KUMAR KESHRI MIRA SADAN ROAD NO 03 ANAND VIHAR NEAR WAXPOL FACTORY BOOTY MORE BUTI RANCHI JHARKHAND 834012 | RANCHI | RANCHI | JHARKHAND | 834012 | 2 | Rejected-Finance Quoted rate more than L1 | |
| 3 | 3₹39.4 L+₹3.4 L (9.55%)Rejected-Finance SANDHYA NIWAS MAGADH COLONY ROAD NO 03 SHERGHATI ROAD PS MAGADH MEDICAL COLLAGE DIST GAYA PIN 823001 BIHAR | GAYA | BIHAR | 823001 | 3 | Rejected-Finance Quoted rate more than L1 | |
| 4 | 4₹41.0 L+₹5.0 L (14.0%)Rejected-Finance VIKASH NAGAR ROAD NO 1 NEAR GAUSHALA RAMGARH CANTT JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | 4 | Rejected-Finance Quoted rate more than L1 | |
| 5 | 5₹42.5 L+₹6.5 L (18.1%)Rejected-Finance | 5 | Rejected-Finance Quoted rate more than L1 |
Tender Value
Refer Docs
EMD Value
₹91,400
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT PO- HOTWAR RANCHI Pin- 834012
PROVN OF VARIOUS MINOR WORKS AND SPL REPAIRS WORKS UNDER GE DIPATOLI
2023_MES_632870_1
8000/1946/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Dipatoli
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Dipatoli
₹91,400
Yes
28 Feb 2024
15 Dec 2023
13 Jan 2024
15 Dec 2023
11 Jan 2024
29 Dec 2023
Amount
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and as directed.
M&L for PCC 1;4;8 type D 2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete, complete all as specified and as directed.
S&F MS work as in angle iron fencing posts & struts thick for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to IS-15911-2010, complete all as specified and as directed.
S &F for Rolled sections of Fe 410W (Gde 250 ) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and as directed.
M&L Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fix Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws , complete all as specified and as directed.
S&F 80 mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed.
M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement, complete all as specified and as directed.
M&L supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer, complete all as specified and as directed.
Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.
S&Fix utensil rack/kitchen rack stainless steel size 850xmmx800mmx270mm as approved make and fixed to wall, complete all as specified and as directed.
S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Parnala for water colleting, fixed with self tapping screws, complete all as specified and as directed.
Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welde tubes confirming to IS 1161-1998 grade St-240, complete all as specified and as directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 grade St.-240
M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
Dismantling of timber scantling 40 Sqcm and over in section in any position as in unframed work, complete all as specified and as directed.
Dismantling of timber in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section framed work, complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamel paint on old steel surfaces over 10cm width or girth width or girth preparation of surfaces complete all as specified and directed.
Dismantling of ceiling boards of any description and at any position (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets and grid frame work all as complete all as specified and directed .
Dismantling wall and ceiling board (fibre,pulp,insulations etc) or insulation board any thickness including cover fillets complete all as specified and as directed.
Supply and fix GI hangers of 6mm dia (up to 1200mm length) adjusting level fixed to iron frame work by making holes for holding GI wire or fixed by means of ceiling cleats made out of GI flat 40mm x 3mm size, 60mm long complete all as specified and directed.
M&L Anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed.
Dismantling of any type floor, hearth or wall tiling, stone including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and as directed.
M&L Non- skid colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm as in flooring and skirting including 15mm thick screed bed in CM(1:6) complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm/450x350x7mm thick over and including 15 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and as directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick as in skirting over 10mm thick cement plaster in CM 1:4 with polishing with beewax polishing complete all as specified and as directed.
M&L 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:3:6) type C-2 complete all as specified and as directed.
M/L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified and as directed.
Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed.
M&L chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed.
Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed.
S & F figured glass, pin head type glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed.
M/L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
Material and labour for preparation and treating ends of posts, back of chowkats etc area of tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm complete all as specified and as directed.
Material and labour for preparation and treating small articles, area tarred not exceeding 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and as directed.
Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and as directed.
Ditto all as per item No 39 but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.
Taking down shutter of any description nexc 1 Sqm each complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2sqm each complete all as specified and as directed.
Re-fixing shutters in same opening exc 1 sqm but n.exc 2sqm each complete all as specified and as directed.
S&F 40mm Flush shutters(ISI Marked) solid core construction, with particle board core and plywood, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
Supply and fix 30mm thick, 2nd class hard wood, glazed and skeleton window shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and as directed.
S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed.
M&L for mild steel works as in hold fast/wind ties etc, complete all as specified and as directed.
M/L PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed.
Supply and fix 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F mild steel sliding door bolts 250mm long complete all as specified and as directed.
S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified
S/F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed.
S&F 150mm long Aluminium handle cast type anodised complete all as specified and as directed.
S&F 125mm size aluminium handles, cast type anodised complete all as specified and as directed.
S&F 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
M & L preparation of new wooden surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth complete all as specified and as directed.
M&L for applying two coats of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed.
Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and as directed.
Taking up or down steel tubing and connections including for refixing or removal 20mm borecomplete all as specified and as directed.
S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed.
S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 20mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed.
Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed.
S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) bends any radius 110 mm dia complete all as specified and as directed.
S&F PVC(SWR) bends any radius 75 mm dia complete all as specified and as directed.
S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed.
S&F in repair vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.
Supply and fixing as in repairs vitreous china urinal , half stall type, white with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete all as specified and directed.
S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc
S&F in repair 15mm, stop valve/angle cock, cast copper alloy fancy type chromium plasted, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design and all as specified and directed.
S&F as in repairs long body pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head `HOT' or `COLD' with long screwed shank and flynuts screwed for iron pipe completed all as specified and directed.
S&F in repairs bib taps fancy type cast copper alloy chromium plated 15mm bore with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and all as specified and directed.
S&F in repair 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F in repairs PVC valveless syphonic action with dual flushing system fancy type low level flushing cistern 10 ltr. Capacity of approved incl flush pipe of 32mm bore and all as specified and directed.
S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer , complete all as specified and as directed.
S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass.complete all as specified and as directed.
Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed.
M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6). complete all as specified and as directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L rendering on fair faces of brick work 15mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface complete all as specified and as directed.
M&L rendering on fair faces of brick work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cement for external surface complete all as specified and as directed.
M&L for complete removal of existing treatment or preparation of newly plastered wall surfaces, chajja, facia etc and applying two coat weather proof exterior emulsion paint(1st quality)/plastic emulsion paint on walls, chajjas,facia by mechanical applicator of any height of bldigs etc , including primer complete all as specified and as directed .(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE)
M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls surfaces complete all as specified and as directed.
M&L for washing, rubbing down and stopping of distempered and painted of any colours wall surfaces and applying two coats of distember oil emulsion white or tinted complete all as specified and as directed.
M&L for providing and applying 3mm thick wall care putty over plastered and old different coloured treated wall or ceiling surfaces complete all as specifed and directed
Demolition of RCC in floors (other than ground floors beams,chajjas,lending slab and similar suspended works all as specified and directed.
M&L for precast reinforced cement concrete M-15, using 20mm graded stone aggregate as in cover slab ( for manhole etc)including use & waste of form work for fair finished surfaces slab complete all as specified and as directed.
M&L mild steel deformed TMT bar 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M/L machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness , M-35 Grade laid over and including 25mm thick sand cushioning all as specified and as directed.
M/L for spreading and levelling of sand in layers n exc 25cm thick over sub base complete all as specified and as directed.
Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering, complete all as specified and as directed.
S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 , complete all as specified and as directed.
S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed.
S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces , complete all as specified and as directed. (a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick.(c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter.(f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design. (Note: Window will be measured outer to outer frame and no extra to be paid.)
S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed. (Note: Door shutter will be measured outer to outer frame and no extra will be paid).
Supply and fix powder coated alu frame work such as door, window and ventilations as approved aluminium section with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F 2nd class hardwood factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.
M&L Preparing newly plaster surfaces & applying two coats of cement base paint, complete all as specified and as directed.
Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.
M&L for preparing the old surfaces by complete removel of existing treatment and applying two coats of cement bsed paint on walls complete all as specified .
M&L for preparation of old surfaces and applying one coat of white wash on wall including cornices etc complete all as specified and directed.
M &L for Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
M&L Vitrified ceramic tiles 7-8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick rendering1:6 complete all as specified and directed
Taking down roof trusses, Purlins and coupled rafters or trussed beams up to 4 to 8 meters, complete all as specified and as directed.
Supply & fix in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.
Supply & fix in repair vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.
Supply & fix in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.
Supply & fix in repair angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
Supply, fix in repair 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.
Supply & fix in repair PVC connections of 450mm long for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
Supply & fix in repair vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.
Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.
Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.
Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.
M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.
All as per Ser item No 120 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and as directed.
All as per Ser item No 120 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and as directed.
All as per Ser item No 120 here-in-before but one bell/buzzer point controlled by one push button on the independent board, complete all as specified and as directed.
All as per Ser item No 120 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common earth dolly, complete all as specified and as directed.
Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.
S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.
S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.
S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.
S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed.
S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.
S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.
S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed.
Supply and Fix modular switch one way 10 Amp 240 volts one module complete all as specified and directed.
Supply and Fix modular bell push switch one way 10 Amp 240 volts one module complete all as specified and directed.
Supply and Fix modular switch one way 20 Amp 240 volts one module complete all as specified and directed.
Supply and Fix socket modular one way 10 amp 240 volts two module complete all as specified and directed.
Supply and Fix socket modular one way 20 amp 240 volts two module complete all as specified and directed.
Supply & Fix regulator modular step type one way 220 volt two module complete all as specified and directed.
M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)
All as per ser item No-139 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire, complete all as specified and as directed.
All as per ser item No-139 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire, complete all as specified and as directed.
All as per ser item No-139 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire, complete all as specified and as directed.
Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.
Supply and fix MCCB DB TPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.
Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed.
S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and as directed.
S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed.
S&F in replacement of Ultra slim LED panel tube light fitting 36 watt 230 Volt made from extruded aluminium housing frame (recesss/pendant) 2' x2' Complete with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F in replacement of LED tube light fitting 20 watt 230 Volt LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed.
S&F in replacement of building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed.
M&L for rewinding repair and greshing of ceiling fan of any size sweep single phase. Ceiling fan of any size opening from any height or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshing with required necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as specified and directed.
S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, 1200 RPM , copper winding fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
S&F in replacement PVC ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable , complete all as specified and as directed.
Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface , complete all as specified and as directed.
Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and as directed.
Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.
Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement
Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection, complete all as specified and as directed.
M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on , complete all as specified and as directed..Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.
M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed.
S&F for highly efficient LED bulbs, 10 W complete all as specified and derected.
S&F Exhaust fan steel body, single phase, 230 V, 50 Hz, 380 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 10 sqmm 2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.
M/S.R.S.Chauhan and Sons
M/S SURYA BUILDERS
M/S KAMLESHWAR SINGH
HARINANDAN RAI SONS
M/S OMANIA ENTERPRISES
M/s Mukesh and company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .