Arranging power supply to an extension of 15 HP and 10 HP IP set by providing 63KVA transformer and extension of HT and LT line for newly drilled borewells (

Arranging power supply to an extension of 15 HP and 10 HP IP set by providing 63KVA transformer and extension of HT and LT line for newly drilled borewells (

Line Supports (pole)

a) PSCC Pole - 9 Mtr Long, 200 Kg WL (DwgNo. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards

b ) PSCC Pole - 9 Mtr Long, 300 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at work spot) NOTE:- Consolidated amount for both loading and unloading 9 Mtr RCC/PSCC Pole

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil

Cross Arms (MS & GI ) as per IS -1977

a) LT 4 Pin Cross Arm MS (Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018

b) Spiral Earth Electrode

Clamps A Type (MS & GI ) as per IS -1977

a) PSCC Pole (300 Kg WL) Clamp - MS(Dwg No. BESCOM/GM/QS&S/59 Dtd 24.11.2018)

b) Guy Clamp - GI

c) Anchor Rod using 12 mm rounds/Guy Rod - GI

d) MS Fish Plate

SMC Line Materials

11 kV, Cross Arm with HT Top Support (glass reinforced hot pressed SMC compound)

Digging of Pit for GUY SET

Ordinary Soil (Per Pit)

Insulator as per IS -1445 for Ceramic , IS 7935 for GI pin , IEC -61109 for polymeric

a) 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator

b) 11kV, 5kN Composite/ Polymeric Pin Insulator (24 mm dia FRP Rod)

c) No. 8 Strain Insulator

d) DISC Insulator 45 kN Porcelain

e) 11 kV, 45 kN Polymeric Insulator

Fixing of Cross Arm, Single Top Support ,EG Stiruup, Anti climbing Device ,Guy set, Guarding etc.,

a) Fixing of 4 Pin cross arm with Insulator and braces fixing

b) Fixing of V-Shape/Horizontal cross arm including Single Top Support brace and Insulator fixing

c) Fixing of HT/LT Single Top Support

d) Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

e) Same as above but using 2 nos of No. 15 Strain Insulator

f) Fixing of Danger Board

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

DP Set (2 Pole Structure Kit) as per IS-1977

For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS(Dwg No. BESCOM/GM/QS&S/35 & 63 Dtd 24.11.2018)

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): A open bushing type 2014

63 kVA, Aluminum Wdg, Star 1 (4 Star)

Loading & Unloading of Transformer (when maintaince men for loading and unloading are not available in store) Loading 63 kVA

Loading & Unloading of Transformer (when maintaince men for loading and unloading are not available in store) Unloading 63 kVA

Erection of Transformer & Structures

Erection of 25 to 63 kVA Transformer on Transformer Structure

Supplying & Fixing Chemical earthing for grounding. Conduits, IC cut-outs & other equipments back fill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior...

Anticlimbing Device :

Spike type GI About 3.0 Kg in weight

Guy Wire and GI Wire as per IS 2141

a) Guy Wire & GI Wire as per IS-2141

7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM

b) 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

LT Protection LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018)

Street Light and Other Works

Fixing of LT Protection Kit

Accessories for ABC Cables as per NF -33 , as per IS 13573 for Joints & Terminations

11 kV, AB Cable Straight thru' joint kit suitable for 95 Sqmm

Heavy Duty Copper Terminal Long Barrel

95 Sqmm Copper Terminal, Apprx Wt: 58 Gm

PG Clamp Rabbit to Insulated Wire

PG Clamp 95 Sqmm (Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018)

LT Line Spacer For 4 Wire

Meter Protection /Temper Proof Box (MS) for LT Installations 25 HP and above

LTMetering Box for housing the ETV Meter without CT's busbar wiring etc

Supplying .......A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...

Supplying, fixing and wiring 50/5to400/5A5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Measuring Equipment

LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/GPRS Modem (as per technical specifi...

HG Fuse Unit as per IS-5350 Part -2

11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21

GOS as per IS 9921 ,IS -1977

a) 11 kV, 200 Amps Single break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

b) H - Frame Set for fixing 11 kV, 200 Amps Single break GOS - (For DP structure for providing New GOS for Sectionalisation) - MS

ACSR Conductor as per IS 398(Part -2/1996) Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Stringing of conductor

Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps

Transportation Rates: ACSR Conductor

Additional charges for every additional 100 Mtr above 185 Mtr

Lighting Arrester as per IEC -60099-4

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

PG Clamp Rabbit to Insulated Wire

95 Sqmm(Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018)

Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr

Lisioning charges towards electrical Inspectorate approval meter rating etc., complete