Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC ok | |
| 2 | L2₹31.6 L+₹1.8 L (5.93%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹33.5 L+₹3.6 L (12.1%)Rejected-Finance VILL PO MANOHAR CHHAPRA MOTIPUR DISTT MUZAFFARPUR PIN 843111 | MOTIPUR | MUZAFFARPUR | BIHAR | 843111 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹41.8 L+₹12.0 L (40.0%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹71,100
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bihta
GE (AF) Bihta PIN 801103
Addition/alteration to Airmen billet Bldg No P-38 and 39 at AF Stn Darbhanga under GE (AF) Bihta.
2022_MES_538847_2
8232/BHT/DBG/E8
Open Tender
Civil Works
Item Rate
180 days
Darbhanga
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Bihta
₹71,100
Yes
26 Nov 2022
29 Sept 2022
28 Oct 2022
29 Sept 2022
26 Oct 2022
11 Oct 2022
Amount
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) any thickness, incluing cover fillets, complete all as specified and directed by Engineer-in-Charge.
Dismantling boarding, any description, fixed in any position complete all as specified and directed by Engineer-in-Charge.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc 1 sqm and nexc 2 sqm each, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats with shutter (without taking off shutters from the frames) not exc 1.5 sqm each, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats with shutter (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.5 sqm each, complete all as specified and directed by Engineer-in-Charge.
Taking down shutter and refixing in same opening of any description exc1 sqm and nexc 2 sqm each, complete all as specified and directed by Engineer-in-Charge.
Taking down plastering in cement lime or cement mortar complete all as specified and directed by Engineer-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Demolition Reinforcement Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Surface dressing n exc 15cm deep and getting out in Soft/ loose soil complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches n exc 1.50m wide and n exc 1.50m deep and getting out in soft/ loose soil complete all as specified and directed by Engineer-in-Charge.
M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundations, filling mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for MS TMT bars 8mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed aggregate) mixed with water proofing compound as in DPC course complete all as specified and directed by Engineer-in-Charge.
Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for RCC slab supported on columns, beams, wallas etc in roofs, landing etc and like Type B 1 (1:2:4) (20mm gardedstone agg) Nominal Mix, complete all as specified and directed by Engineer-in-Charge.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping), incl fair finish surface complete all as specified and directed by Engineer-in-Charge.
Use and waste of formwork to edges of concrete flats, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed by Engineer-in-Charge.
Providing precast cement concrete 1:2:4 (type B1) in cover slabls with plain fair faces including chamfers weatherings throating etc ad setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick on other than fair faces on brick masonary or concrete surfaces in cm 1:6 finished complete all as specified and directed by Engineer-in-Charge.
M&L 15 mm thick rendering on fair faces of external wall of brick masonary or concret surfaces in cm 1:4 finished complete all as specified and directed by Engineer-in-Charge.
Prepration of newly plastered external surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge.
M&L for Prepration of newly plastered on walls complete all as specified directed and applying two coat of oil bound distemper over a coat of alkali resistant priming paint, complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, waterning and well ramming in layers not exceeding 25cm thick , complete all as specified and directed by Engineer-in-Charge.
Removing excavated material n,exc 50 m and depositing where directed at a level n, exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
M & L for hard core (broken bricks) of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundations, filling mass concrete complete all as specified and directed by Engineer-in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick screed in CM 1:6 on brick or concrete surfaces for fixing of tiles as in floor complete all as specified and directed by Engineer-in-Charge.
M&L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
M&L Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigment complete all as specified and directed by Engineer-in-Charge.
M&L for Non-Skid ceramic coloured tiles (Premium quality) 7 to 8 mm thick area of each tiles exc 0.18sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 10 mm thick in CM 1:4 on wall to receive tile complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured tiles in vertical surfaces 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.
M&L steel work in tubular trusses /posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 -1979 graded SI 240, complete all as specified and directed by Engineer-in-Charge.
S&F RMP sheeting 1.5 mm thick with 1.5 corrugation side lap fixed with L-type or J type or cranked hook bolts in roof, wall etc complete all as specified and directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
S&F Anodised aluminium snap grid frame work wih 20x25mm 'T' and 20x20mm 'L' section with grid size of 605x605mm including with necessary 3.15mm GI wire as in suspended etc complete all as specified and directed by Engineer-in-Charge.
S&F Gypsum ceiling board 60x60cm x12mm thick (pre-finished decorative type) in ceiling fixed with screw as per manufacturers instruction, or complete all as specified and directed by Engineer-in-Charge.
S&F anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing etc, Complete all as specified and directed by Engr-in-Charge.
S&F Anodised aluminium window and ventilator shutters,fixed type without sash bar aluminium section weighing 0.55 kg/m includinng necessary joining cleat glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge.
S&F 4 mm Figured glass, pin head type and to be fixed in Aluminium frame work etc complete n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge.
M&L for roof sheets stays, window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.
All as per item No 49 but fixing only complete all as specified and directed by Engineer-in-Charge.
M/L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
S&F 30 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side complete all as specified and directed by Engineer-in-Charge.
S&F 30 mm 2 nd class hardwood Glazed and skeleton shutters, divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
M&L for Hold fast for fixing of chowkats and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed complete all as specified and directed by Engineer-in-Charge.
S&F mild steel medium weight cold rolled butt hinges 100 mm long complete all as specified and directed by Engineer-in-Charge.
S&F aluminium anodised, barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.
S&F 125 mm long aluminium handle, cast type, anodised complete all as specified and directed by Engineer-in-Charge.
S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type), 250 mm long,and fixing clip of sheet cast or extruded section or fixing bolt cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 20mm thick 2nd class softwood Boarding, fixed with nails in any situation Planed one side with butt joints complete all as specified and directed by Engineer-in-Charge.
M&L 18/19mm thick Block board grade2 quality interior grade decorative type with decorative face veneer on one face fixed to timber frame work complete all as specified and directed by Engineer-in-Charge.
M&L Second class hard-wood in scantlings clean sawn complete all as specified and directed by Engineer-in-Charge.
M/L preparing surface of wood and wood based materials new or old, of any description and girth, not otherwise described and treated with creosite complete all as specified and directed by Engineer-in-Charge.
M/L two coats of synthetic enameled painting over a coat of pink primer to wooden surfaces of any description exc 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.
Preparation of steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer primer, complete all as specified and directed by Engineer-in-Charge.
M&L for Cutting holes in brick walls built in cement mortar exc. Half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 complete all as specified and directed by Engineer-in-Charge.
S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in tranches or in floors complete all as specified and directed by Engineer-in-Charge.
S & F 110mm bore PVC (SWR) bends complete all as specified and directed by Engineer-in-Charge.
M&L 20mm bore of pipe Cutting existing steel tubing for alterations or additions (Each cut measured) complete all as specified and directed by Engineer-in-Charge.
S&F 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed by Engineer-in-Charge.
S&F of 15mm dia tube medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F fancy type Bib taps, chromium plated 15mm dia with capston head handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
M&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engineer-in-Charge.
M&L washing, rubbing down and stopping of distempered and painted surface on walls complete all as specified directed and applying two coat of oil bound distemper over a coat of 3 mm wall care putty, complete all as specified and directed by Engineer-in-Charge.
Prepration of newly plastered external surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S&F harrison rails mild steel chromium plated with fixing brackets stops rollers etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for point wiring for One light point with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed by Engineer-in-Charge. (a)One light point controlled by one way switch.
All as per item No 1 but 3 pin 15 Amp socket outlet on indenpendednt board with 2.5 Sqmm cable complete all as specified and directed by Engineer-in-Charge
S&F Switch Socket conmbination 2 in 1 3 pin 5 Amp and 3 pin 15 Amps flush type universal complete all as specified and directed by Engineer-in-Charge
Ceiling rose surface bakellite of three terminals complete all as specified and directed by Engineer-in-Charge
Switch Piano, flish button, single pole one way, 5 Amp,230 Volts complete all as specified and directed by Engineer-in-Charge
Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge
S & F ANTI suicide fan rod and load on fan 22 kgs,then start the smart rod/pipe opens from its center and spring in the pipe expands .Rod will be tested at Govt of India MSME labs size of fan rod upto 10"(250mm)white/brown complete accessories 230 V,1200/1400 mm sweep,function fans,nut bolts cutting of pipe including taking down and refixing the ceiing fan the same complete all as specified and directed by Engineer-in-Charge
Bikarma Enterprise
M/S ANAND MOHAN ENTERPRISES
D.D. BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .