CONSTRUCTION OF GROUND EQUIPMENT SHED WITH A ROOM FOR STORAGE OF D-91 SCALE ITEMS AT AIR FORCE STATION LEH

Amount

PART-I B/R WORKS Surface excavation n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Removing excavated material exc. 250metre km but n exc. 500metre and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat, rough finished surface, complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide on rough finished surfaces of concrete, complete all as specified and directed

Supply and fix in position, mild steel bars TMT, 10mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and reammed including watering complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:2:4) type B-1 using 2A0mm graded crushed stone aggregate as in flooring,finished surface even and fair without using extra cement complete all as specified and directed.

Material and labour, 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, plain cement concrete (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Supply and fix, pressed steel frames for doors with one rebate, size of frame 105mmx60mm, including necessary fixing lugs, hinges, lock strick plate, etc, including PCC 1:2:4 type B-0 filling in, complete all as specified and directed.

Supply and fix, 35mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fix, steel window with side hung shutter including projecting type hinges with steel handle and steel pegstay complete with glazing bars, dovetailed or welded as per specification, complete all as specified and directed.

Supply & fixing, Sheet glass 3mm thick, plain, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed.

Supply and fix, Aluminium handle,150mm size, fabricated type, anodised, complete all as specified and directed.

Supply and fix, Barrel tower bolts 150mm long, aluminium anodised, of extruded section and fixed, complete all as specified and directed.

Supply and fix, Barrel tower bolts 125mm long, aluminium anodised, of extruded section and fixed, complete all as specified and directed.

Supply and fix, sliding door bolts 300mm long, of extruded sections aluminum alloy, anodized, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminum, dia of bolt 12mm, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, rendering 5mm thick in CM (1:3) as on ceiling, soffits of beams, chajjas, etc, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, two coats of cement base cement base paint over a coat of alkali resistant primer including preparation of plastered/ concrete surfaces, complete all as specified and directed.

Material and labour, for two coat of dry distemper over a coat of white wash incl preparation of newly plastered wall surfaces complete all as specified and directed.

Material and labour, preparation of newly plastered sufaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including one coat of pink primer, complete all as specified and directed.

Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including red oxide primer, complete all as specified and directed.

Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint , complete all as specified and directed.

Material and labour, water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Supply and fix, 1.25mm thick lathe steel rolling shutter gear operated type with bevel gear box and crank handle with ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete all as specified and directed.

Supply and fix, safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply and fix, ball bearing for rolling shutters complete all as specified and directed.

Supply and fix, floor stopper of size 140mm of aluminium alloy body and toung anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

PART-II E/M WORKS Material and labour for point wiring for one light/fan /bell point controlled by one switch one way in and including PVC conduit or cassing capping as per site requirement using FRLS PVC unsheathed multi strand copper conductor cable 1.5sqmm single core for one light/fan point/ bell point controlled by one switch including 3mm thick plastic laminated sheet cover over PVC/wooden box for earth continuity insulated PVC unsheathed (green colour) 1.5sqmm copper earth wire connected to common earth duly using complete all as specified and directed . Note : (a) wiring shall be done by using proper colour coding.

All as per item No 47 here-in-above but for 05 Amp socket outlet on independent board

All as per item No 47 here-in-above but for 05 Amp socket on same board

All as per item No 47 here-in-above but using 2.5 sqmm wire for phase neutral and earth for 15 Amps independent socket outlet

Supply and fix, socket outlet two-in-one, three pin 6 and 16Amp, flush type 230 volts complete all as specified and directed .

Supply and fix, socket outlet two-in-one, three pin 6 Amp, flush type 230 volts complete all as specified and directed .

Supply and fix, LED adore lamp 9/10Watt, B22 base 6500k CDL typecomplete all as specified and directed

Supply and fix, LED light fitting 1x20watt, 220volts, AC decorative box type with driver, holder including LED tube rod connecting with 3 core flexible copper wire of suitable size from ceiling rosecomplete all as specified and directed

Supply and fix, Switch piano, flush type 15 Amps, one way 230 volts complete all as specified and direcred.

Supply and fix, Switch piano, flush type 5 Amps, one way 230 volts complete all as specified and direcred.

Supply and fix, ceiling rose Bakelite white/black coloured of size 25x50mm two to three terminals, complete all as specified and as directed.

Supply and fix, Lamp holder insulated bodywith back plate for batten fitting suitable for LED lamp complete all as specified and directed

Supply and fix, sheet metal enclosure double door for DB's SPN 8 ways 240 volts having 200Amp rated bus bar complete all as specified and directed

Supply and fix, MCB SPN 32 Amp, 240 volt-10KA complete all as specified and directed

Supply and fix, MCB SP 6 to 32 Amp, 240 volt-10KA complete all as specified and directed

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16Sqmm 2core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.

Supply and laying / fixing , GI pipe light grade 25mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed. Note (s) : (i) MS clamps, nuts, bolts etc where required shall be measured and paid separately. (ii) Cutting road etc. shall be measured and paid separately.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

Material and labour, for cutting existing road/PCC hard standing/ pavement /drain for taking out or laying of cable/pipe including all necessary earth work and making good the disturbed surface with PCC 1:2:4 type B-1 complete all as specified and directed.

M/S RIGDOL CONSTRUCTION