Establishing 2x20 MVA, 66/11kV SS at Honnebagi (Vadnal) in Channagiri Taluk, Davanagere District and Construction of 66kV LILO line with Coyote conductor from existing 66kV-Benkikere-Goppenahalli SC line to proposed 66kV Honnebagi(Vadnal) SS for a distance of 0.757kms in Channagiri Taluk, Davanagere District, on PTK basis including Supply of all Materials/ Equipments (Excluding Supply of 11kV Switchgear) ,Erection (including dismantling & Civil Works) of all Materials/Equipments, T&C

Power Transformer:

20 MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first fil...

Nitrogen Injection fire extinguishing system-Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer below 100 MVA, as per Technical Specification

CIRCUIT BREAKER :

SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connector...

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

2) Upright mounting type without Earth switch LPH 4600 mm.

3) Upright mounting type without earth switch LPH 6350mm

Terminal connectors for Isolators :

Rigid type suitable for Drake ACSR - 27 Nos

Flexible type suitable for 75mm Al.pipe - 3Nos

B)11KV isolator

i) 11KV isolator Double break 400A, 25KA capacity with rigid bi-metalic terminal connectors suitable for coyote ACSR for capacitor bank.

ii) 11KV isolator Single break 400 A, 25KA capacity with Roster switch with rigid bi-metalic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor.

i) 66KV Class, 40KA, CT of ratio 400-200...

ii)66KV Class, 40 KA, CT of ratio 200-100/1-1-1A for Transformers

For metering : Accuracy 0.2S, Burden 10 VA

For backup protection : Accuracy 5P20. Burden 30 VA

For differential /Distance protection...

iii) 11 KV Class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection( of similar rating and ratio as that of Incomer of 11KV Switchgear) with terminal connector suitable for 2 Nos. of Copper flats...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KISOK etc., complete as per technial specifications:...

SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.

i) 60kV, 10kA, SM type -For Transfor...

iii) 9kV, 10KA Class

Control and Relay panel complete, Simplex type 110V DC compatible to SCADA complete as per technical specifications

a) For Power Transformer 66/11 kV

b) For 66KV Transmission lines

1.All the C&R panels and associated panels shall be of one and the same make for uniformity and interchangability of components

2. The accuracy class of metering...

Total Weight of Station structures & Mounting Structures, Lighting Mast & Street Lighting Structure fabricated out of Galvanised Mild Steel (excluding Bolts & nuts) as per Technical Specification

Total Weight of supply of Bolts & nuts of Station structures & Mounting Structures, Lighting Mast & Street Lighting Structure as per Technical Specification.

11kV ODS and take of structure

1) Supplying of Double pole Structure with all accessories using 9.5 mtrs long, 350Kg WL suitable for mounting 11kV 400A Roaster GOS & 9kV lightning arrestors complete s...

2) Supplying of Double pole Structure using 9.5 mtrs long, 350Kg WL suitable for mounting single break GOS & 9kV lightning arrestors complete set with 11KV, 400A single break isolators and 9KV, 10KA ...

BUS BAR FORMATION :

i) Drake ACSR (66kV side)

Rigid bus with taps & clamps 66kV side:

(i) Aluminium Pipe conforming to 6340 WP of IS-5082/1969 (BS 1600-Sch.40) of following nominal diameter

a) 75 mm size for Main Bus

b) 63 mm size for connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66kV side with rounded off end.

iii) Post insulator clamps suitable for 75mm Aluminium tube & Post insulator solid core type - 66kV side

b) Sliding type

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV

Post Insulators-Cylindrical Solid Core Insulators as per technical specification:

66kV 1 Unit/Stack

INSULATOR HARDWARE & CLAMPS as per technical specification:

a) C type Wedge connectors suitable for Coyote -Drake (for line side)

b) Post insulator clamp suitable for Drake ACSR and 66kV Solid core insulator

Auxilliary Transformer :

Supply of station Auxiliary transformer with oil, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, along ...

LTAC Panel (indoor):

415V, as per Technical specification comprising of Volt Meter, Ammeter & 3 Ph 4 wire 0.2 accuracy class. 1No. I/C MCCB 200A + 2Nos. 3 phase, 63A OG HRC fuse + 2Nos. 3 phase, 32A...

AC Distribution box (out door ):

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specificati...

LT Power armoured UG Cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

b) 1.1 kV class 4X 25 Sq mm Copper Cable with glands/lugs/ferrules

c) 1.1 kV class 4X 10 Sq mm Copper Cable with glands/lugs/ferrules

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

DC Distribution panel (Indoor type) :

DC Distribution panel (Indoor type) as per technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for ...

1.1kV class PVC insulated copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications:

i) 19 Core 2.5 Sq.mm.

ii) 10C x 2.5 Sq.mm

iii) 4 Core 6.0 Sq.mm.

iv) 4 Core 2.5 Sq.mm.

v) 2 Core 6 Sq.mm.

(For station Yard Lighting -800Mtrs)

vi) 2 Core 2.5 Sq.mm.

Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...

11KV U.G. Cable with the required cable terminations at both ends.

a) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Tra...

b)11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

c) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

d) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

e)Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

f)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

g) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

h)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

i)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

Equipments required for establishing SCADA Communication as per KPTCL Specification

i) Remote Terminal Unit (RTU) - 64 (I/O) Port

ii) Data Concentrator Unit (DCU)

iii) 2kVA online UPS (230V AC 1phase 50Hz) with battery

iv) Supply of Power cables for SCADA

a) Current cable - Copper core with c/s 4C X 4.0 Sqmm multistrand.

b) Voltage cable - Copper core with c/s 4C X 2.5 Sqmm multistrand.

c) Signal Cable - Armoured Copper core with c/s 10C X 0.5 Sqmm multistrand

v) Supply of Control Cables for SCADA

a)Control cables copper core 10C X 1.5 Sq mm Multistrand, conforming to KPTCL specifications

b)Control cables copper core 3C X 4 Sq mm Multistrand for AC input to UPS and UPS to RTU, conforming to KPTCL specifications

c)Control cables copper core 1C X 32 Sq mm Multistrandfor Battery conforming to KPTCL specifications.

Note: Satellite communication required will be arranged by SLDC

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS

i) Mechanical Foam Type Extinguisher :

ii) Water type (gas pressure type) 9 Ltr. capacity

iii) Carbon Dioxide Type 4.5 Kgs capacity

a) G.I Buckets15 Ltr. capacity

b) Steel stands for above to have 4 buckets to each station

Maintenance Tools and Plant.

1) Portable (Mobile) Oil Pump (1/2 HP Airpump 500 to 1000 gallons)

2) Telescopic Ladder Aluminium - 6Mtrs Height.

3) Ring spanner set.(12 Nos per Set)

4) Tube spanner set.(12 Nos per Set)

5) Pipe wrench 24inch.

6) Pipe wrench 18inch.

7) Hydraulic crimping tools upto 1000Sq.mm

8) Rubber Hand gloves (15Kv Tested)

9) Rechargeable 5W LED Hand Torch

10) Insulated Cutting plier 12" size

11) Insulated Cutting plier 8" size

12) Live line tester with alram Indicator

13) Screw Driver 18"

14) Screw Driver 12"

15) Hammer 8Lbs

16) Hammer 2Lbs

17) Chain Pulley Block 5 Ton

18) Hydralic jack 5 Ton Capacity

19) Pipe Derrick suitable for lifting 3 MT capacity and lift of 6 mtr height

21) Box Spanners with handle(12 Nos per Set)

22) Transil Oil Dielectric Break down test kit

23) Insulation Tester Digital type Megger 2.5 to 5 KV

24) Insulation Megger 500V hand operated

25) SF-6 Gas leakage detector

26) Multimeter Electro Mechanical

27) Multi Meter Electronic

28) Hydrometer for specific gravity of battery

29) DC voltmeter range -5V to +5V

30) Hydrometer Syringe suitable for vent holes

31) Specific Gravity correction Chart

32) Wall mounting type holder for Hydrometer

33) Thermometer with wall mounting holder

34) Rubber Apron

36) Protective goggle

37) Acid Resisting Jars( 4 Pint Capacity)

38) Rubber Shoes Knee Height

39) Glass Funnel

40) Grounding Sticks

Miscellaneous items:

1) Rubber mats 2000mm X 1000mm X 12mm size tested for 15KV class

2) First aid box

3) Shock treatment charts hard board laminated with colured pictures & Literatures both in kannada & English

4)Water filter/water purifier wall mounting type (Aqua guard type)

5) Sub-station name board duly painted as per Specification including erection & civil works

6) Fixograph of size 1.5m x 2.5m with Engilsh/Kannda alphabets

7) Brass cupboard lock 7/6 levers (best make of approved quality) 75 mm size

8) Danger board (probhited) with support structure in front of the gate

9) Equipments name plates & earthing name plates including fixing at outdoor yard.

Furniture for Control Room Staff and Maintenance Staff:

1) Steel Almirahs 6.5 Feet

2)Steel Almirahs 6.5 Feet with glass panel doors

3)Officers Tables

4)Steel Slotted Angle rack(big size)

5)Steel Slotted Angle rack(small size)

6)Steel dust bins

7)Executive revolving chairs

8)S Type arm chairs

9)Steel folding chairs

Station Yard Lighting (Out Door)

(To be designed, assessed & quoted by the bidder)

1) Supply and installation/Fixing/Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Po...

2) Supply and fixing of LED streetlight luminaire of 200W with pressure die cast aluminium housing body for optimal thermal dissipation.lamp compartment comprising of anti glare clear diffuser with in...

Fabrication, Prototype Inspection and Supply of galvanised 110kV DC Transmission Line Towers as per Technical Specifications.

Tower type 110kV DC Narrow Based Towers (KPTCL-1D-NB)

Total weight ...

Supply of Bolts, Nuts and washers etc., (galvanised) required for 110kV Transmission Line Towers as per Technical Specifications.

i. Tower type 110kV DC Narrow Based Towers (KPTCL-1D-NB)

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

6) Earth bond 450 mm long

7) Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation c...

Conductor & Earth wire :

1) Coyote ACSR Conductor with 1.5% sag

2) 7/3.15 mm GI Ground wire with 1.5% sag

Insulators strings suitable for Coyote ACSR Conductor as per technical specifications (66kV Line)

i. Single Tension insulator strings consisting of any one of the following:

a. Insulator string consi...

ii .Single Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1x4nos. of 90kN Disc insulators

b. Porcelain long rod insulator string equivalent t...

Hardware and clamps for Coyote ACSR conductor with Arcing horns.

1) Single Tension Hardware & Clamps with arcing horns for Coyote ACSR

2) Double Tension Hardware & Clamps with arcing horns for Coyote ACSR

3) Single Suspension Hardware & Clamps with arcing horns for Coyote ACSR

Accessories for Coyote ACSR Conductors:

a) Mid Span Compression Joints for Coyote ACSR

b) Repair sleeves suitable for Coyote ACSR

c) P G Clamps suitable for Coyote ACSR

d) Vibration dampers for Coyote ACSR

Hardware & Accessories for Ground Wire.

a) M S C Joints suitable for Ground conductor

b) Repair sleeves suitable for Ground conductor

c) P G Clamps suitable for Ground ACSR

d) Single Tension clamps (bolted type) suitable for Ground conductor

Mandatory Spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station)

Copper Contract fingers male & female (For one Complete Isolator)

a) for 123KV Class

Terminal Connector (For one Complete Isolator)

a) for 123KV Class

Terminal Pad (For one Complete Isolator)

a) for 123KV Class

Station Erection

Power Transformer:

20 MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first fil...

CIRCUIT BREAKER :

SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connector...

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

B)11KV isolator

i) 11KV isolator Double break 400A, 25KA capacity with rigid bi-metalic terminal connectors suitable for coyote ACSR for capacitor bank.

ii) 11KV isolator Single break 400 A, 25KA cap...

CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor.

i) 66KV Class, 40KA, CT of ratio 400-200...

3) 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. of 75mmx8mm Copper ...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KISOK etc., complete as per technial specifications:...

SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications..

i) 60kV, 10kA, SM type -For Transfor...

iii) 9kV, 10KA Class

Control and Relay panel complete, Simplex type 110V DC compatible to SCADA complete as per technical specifications

a) For Power Transformer 66/11 kV

b) For 66KV Transmission lines

Total Weight of Station structures & Mounting Structures, Lighting Mast & Street Lighting Structure fabricated out of Galvanised Mild Steel (including Bolts & nuts).

11kV ODS and take of structure

1) Supplying of Double pole Structure with all accessories using 9.5 mtrs long, 350Kg WL suitable for mounting 11kV 400A Roaster GOS & 9kV lightning arrestors complete s...

2) Supplying of Double pole Structure using 9.5 mtrs long, 350Kg WL suitable for mounting single break GOS & 9kV lightning arrestors complete set with 11KV, 400A single break isolators and 9KV, 10KA ...

BUS BAR FORMATION :

Main bus/cross bus (all the three phases in a segment) using with Single Drake Conductor with fixing of insulator spacers, levelling of string conductors to the required height ab...

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I...

Post Insulators-Cylindrical Solid Core Insulators as per technical specification:

66kV 1 Unit/Stack

Auxilliary Transformer :

Supply of station Auxiliary transformer with oil, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, along ...

LTAC Panel (indoor):

415V, as per Technical specification comprising of Volt Meter, Ammeter & 3 Ph 4 wire 0.2 accuracy class. 1No. I/C MCCB 200A + 2Nos. 3 phase, 63A OG HRC fuse + 2Nos. 3 phase, 32A...

AC Distribution box (out door ):

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specificati...

LT Power armoured UG Cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules -200Mtr

b) 1.1 kV class 4X 25 Sq mm Copper Cable with glands/lugs/ferrules-2...

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

DC Distribution panel (Indoor type) :

DC Distribution panel (Indoor type) as per technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for ...

1.1kV class PVC insulated copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications:

i) 19 Core 2.5 Sq.mm. -1500Mtr

ii) 10C x 2.5 Sq.mm-1500Mtr

iii) 4 Core 6.0...

11kV Switchgear as per Technical Specification:

11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), (SCADA Compatible), outdoor type, each comprising of 2IC+12F+1BC+2CB+1A...

11KV U.G. Cable with the required cable terminations at both ends.

a) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Trans...

d) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )-14Nos.

e)Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out d...

f)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )-13Nos.

g) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out doo...

h)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type ) -1No.

i)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door ty...

Equipments required for establishing SCADA Communication as per KPTCL Specification

i) Remote Terminal Unit (RTU) - 64 (I/O) Port

ii) Data Concentrator Unit (DCU)

iii) 2kVA online UPS (230V AC 1phase 50Hz) with battery

iv) Integration of RTU, DCU, UPS with field equipments

v) Laying of Cables

a) Current cable - Copper core with c/s 4C X 4.0 Sqmm multistrand. -100Mtr.

b) Voltage cable - Copper core with c/s 4C X 2.5 Sqmm multistrand. -100Mtr.

c) Signal Cable - Armoured C...

Earth Mat Formation:

a) Supplying and laying of 75 x12 mm MS flat welding and applying ACB paints to welded portion with out sodium bentnite clay as per drawing/ Standard specifications.( all Material...

b) Providing 40 mm Dia MS round rod 1.075 Mtrs long Earth mat spike including, benting, top 50 mm overlap, flatening and making spike edge at one end driving into the earth below the ground level and ...

c) Grounding of equipments with 75 x 12 mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like bending, twisting, drilling of holes a...

d) Grounding of Equipments by providing CI pipe of 100 mm ID, 13mm thickness, 2.75 mtrs long with 2 part clamps out of GI flat 50 x 6 mm continously welded all around the pipe using Cast iron welding ...

e) Supplying and providing 450mm dia and 450mm height 1.5to 2 " thickness RCC Hume pipe collar (non pressure type) for earth pits including Transportion, all lead and lifts, etc.

Check Survey and Towers Spotting.

Check survey using their own equipment for 66kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume VI of Comm...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

Paving out conductor from anchor to anchor normally spaced at 5...

2. 7/3.15 mm GI Ground wire Plain Terrian

(Route length of 0.757kms) + (0.196kms after dismantling of old tower and erection of new tower in the existing corridor)

Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the rates ...

Supplying and fixing AC devices:

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...

ii) Supplying and fixing of Barbed wire as per the specification.

Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.

Dismantling of existing Towers

66kV SA Type -2 Nos. - 1.07*2 = 2.14t

66kV SB/SC Type - 1No. = 1.51t

Dismantling of Coyote Condutor

Dismantling of Ground Wire

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 100 A

Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring Residual current circuit breaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Extra length of GI pipe of class B 19mm dia for down rod.

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...