WBPWD/EE-WKED/NIQ-03/2021-22

Amount

Supplying and laying of 4x25 Sq mm PVC/XLPE insulated Armoured Alluminium cable through wall including mending good the damages as to GS. From Mainswitch to TPN DB

Supplying and laying of Single core Flexible FR Cu Cable concealed in wall through suitable PVC pipe as required as to GS.

a) 4x16 Sq mm (TPN SFU to TPNDB)

b) 2x6 + 1x4 Sq mm (TPN to SPN)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry and Finishing cable ends bysoldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and makingconnection to switch, BDB and BBC etc. of XLPE/PVC armoured cables as below:

a) 4x25 Sq mm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a) 2.5 Sq mm

b) 4 Sq mm

c) 6 Sq mm

d) 16 Sq mm

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T or equivalent as approved by EIC)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand/Siemens)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand/Simens/ABB )

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Legrand/Siemens/ABB )

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand/Siemens/ABB )

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch ((Cabtree-Athena/similar of Schenider/ ABB)) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

On Board

a) Avg run 10 m

b) Avg Run 12 m

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 19mm dia polythene pipe with fish wire incl. S/F the same concealed in wall after cutting the channel and mending good the damages and making necy. connection as required as to GS

a) 3x1.5 Sqmm (for Separate plug points and other light circuits and points.)

b) 2x2.5 + 1x1.5 Sqmm (for Power plug.)

b) 2x4 + 1x2.5 Sqmm (for AC Points.)

Supply & Fixing 240 V 6 A Modular type switch (Cabtree-Athena/similar of Schenider/ ABB) with 6A 5 pin Modular type plug socket on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 6 A 2 way Modular type switch ((Cabtree-Athena/similar of Schenider/ ABB)) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Piano key type modulr switch (Cabtree-Athena/similar of Schenider/ ABB) with 16 A, 3 pin Modular type plug socketon GI Modular type switch board having top cover plate and making necessary connections as required

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

2 Module(for Geyser/TV/Phone)

4 Module(power plug)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Cabtree-Athena/similar of Schenider/ ABB) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

6 Module(Separate plug)

8 Module

Supply & Fixing Telephone ocket RJ11 (Brand approved by EIC)

Supply & Fixing TV signal modular type Cable Socket

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works a)19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc (AC Points)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Supply and Fixing following light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length

a) Double LED Tube Fittings(Philips, Model: TMC 502 P 2XT-LED 20/22W incl. Lamp

b) Single LED Tube Fittings(Philips, Model: TMC 501 P 1XT-LED 20/22W P3241 or equivalent as approved by EIC incl. lamp)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. Length

Supply and Fixing of AC Ceilig Fan 1200mm Sweep in existing Down rod including necessary connections as required as per direction of EIC. (Crompton-Aura/similar of Orient/Usha)

Supply and fixing of 20 mm dia GI down rod of 14 SWG (ISI-M) (@ 3.5 m each)

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply and Fixing of 10W LED street light fittings with necessary arrangement including connection and arm bracket painting ( Make: Philips/ Crompton/Havells Equivalent approved by EIC)

Supply and fixing of Mirror ligh fittings diectly on wall incl. Necy connection as required (Philips, Model: LED 13/14 W (1124x22x36mm) Philips Commercial code : 31097/31 Trunk or 38112/31 or equivalent of Crompton/havells as approved by EICor equivalent as approved by EIC)

Supply and fixing of decorative arm bracket including 14W BC LED Lamp (Philips/Havells/crompton)

S & F 2 W LED foot lamp

Supply and fixing of 230V 15L Vertical Storage Geyser on flat iron frame including S/F the same as per direction of EIC (Bajaj or equivalent as approved by EIC.)

S&F of 250 V. 12'' sweep A.C. Exaust fan (Heavy Duty , E.P.C. make). ) incl.Fixing the exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection also S & F of louver shutter/coul on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per G.S

S & F 300mm swipe Dia wall bracket fan(Make: Orient/Havells/Crompton)

Dismantling of all electrical old damaged wirings, switch boards, etc. and taken out the rubbish and unserviceable goods from the site including disposal the same as per direction of EIC.

S. A. ENTERPRISE

UNITED CONSTRUCTION SERVICE

NEW INDIA ELECTRICAL AND ENGINEERING WORKS

MAA TARA ENTERPRISE