Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.5 LAccepted-AOC | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹50.0 L+₹50,094.88 (1.01%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹52.6 L+₹3.1 L (6.24%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹55.3 L+₹5.8 L (11.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
PROVISION OF WAITING ROOM FOR CENTRAL MI ROOM OF CAFVD, TOILET BLOCKS FOR JCO/ORs LIVING AREA OF SUPPLY DEPOT, DROP TEST EQUIPMENTS FEACILITIES AT PTL UNDER CQA AND TRAINING CLASS ROOMS AT DRDC OF CAFVD UNDER GE(CENTRAL) KIRKEE.
2023_MES_578136_2
8679/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
150 days
CAFVD area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE CENTRAL KIRKEE
₹90,000
Yes
31 Mar 2023
1 Mar 2023
24 Mar 2023
1 Mar 2023
23 Mar 2023
8 Mar 2023
1 Mar 2023 - 7 Mar 2023
Amount
Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
Removal of excavated material as in soils to a distance not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing where directed complete all as specified and as directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation in soft/disintegrated rock and getting out complete all as specified and as directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation in hard rock and getting out complete all as specified and as directed.
Material and labour for plain cement concrete (1:4:8), type D2, using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed.
Material and labour for reinforced cement concrete nominal mix type A1, (1:11/2:3) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Material and labour for reinforced cement concrete nominal mix type A1, (1:11/2:3) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.
Material and labour for reinforced cement concrete nominal mix type A1, (1:11/2:3) using 20mm graded stone aggregate as in beam, cantilivers, bressummers, chajja and lintels over 1.5m span complete all as specified and as directed.
Material and labour for reinforced cement concrete nominal mix type A1, (1:11/2:3) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, in shelves and the like complete all as specified and as directed.
Material and labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
As per Sl Item No.10 above but 5mm and over upto and including 10mm dia as in stirrups, spaces and binders complete all as specified and as directed.
Material and labour for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Material and labour for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed.
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed.
Material and labour for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions squre, rectangular or polygonal complete all as specified and as directed.
Material and labour for hard core of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 30 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material and labour for moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete, (1:4:8), type D2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.
Material and labour for precast cement concrete block massonry with solid block type C1 (1:3:6) exceeding 10cm in width and setting in CM (1:6) using 20mm graded aggregate complete all as specified and as directed.
Material and labour for precast cement concrete solid building blocks or slabs 10cm thick type C1 (1:3:6) (with plain or interlocking joints setting in in CM (1:4), in walls complete all as specified and as directed.
Material and labour for rendering 10mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick wall plaster in CM(1:4) mixed with and including integral liquid water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendring 5mm thick plaster in CM (1:3) as in ceiling on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 75mm thick plian cement concrete, (1:3:6), type C2, using 40 mm graded stone aggregate as in plinth protection and finishing surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for water proofing treatment to RCC roof slab, including parapets comprising with the following courses of treatment/specification from bottom to top:- (i) 15mm thick screed bed or bedding layer of cement mortar (1:4) for laying as in roof slab with mixing of WPC and surfaces finished fair and smooth without using extra cement. (Note: WPC measured separately). (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.
Supply only integral liquid waterproofing compound complete all as specified and as directed. MAKE :- Dr Fixit LW plus or equivalent makes specified in PS
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.
Material and labour for Non skid coloured ceramic tiles 7 to 8mm thick square/rectangular area of each tile exc. 0.18 sqm but n.exc. 0.38 sqm as in floors etc over and including 15mm screed bed in CM (1:6) over and including 25 mm thick plain cement concrete type B-1, (1:2:4) using 20mm graded stone aggregate set and joined in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. MAKE:- GLOSSTRA SERIES NAOS GREY DARK DESIGN) OR TECHNO COMMERCIALLY EQUIVALENT MAKE IN KAJARIA, JOHNSONS AND RAK CERAMICS
Material and labour for Non Skid coloured ceramic tiles 7 to 8mm thick, square/rectangular area of each tile exc, 0.06 sqm but n.exc, 0.11 sqm as in floors etc over and including 15mm screed bed in CM (1:6) over and including 25 mm thick plain cement concrete type B-1, (1:2:4) using 20mm graded stone aggregate set and joined in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. MAKE :- GLOSSTRA SERIES NAOS GREY DARK DESIGN) OR TECHNO COMMERCIALLY EQUIVALENT MAKE IN KAJARIA, JOHNSONS AND RAK CERAMICS)
Material and labour for glazed ceramic tiles as in vertical surface 300x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with 10mm thick backing coat in cement morter (1:4) set and joined in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. MAKE :- GLOSSTRA SERIES NAOS GREY DARK DESIGN) OR TECHNO COMMERCIALLY EQUIVALENT MAKE IN KAJARIA, JOHNSONS AND RAK CERAMICS)
Supply and fix aluminium alloy powder coated door including frame with channel sections ( door frame single groove 101.6 mm x 44.45 mm x 2.1 mm, shutter top section 47.62 mm x 44.45 mm x 1.95 mm thick, shutter bottom section 114.30 mm x 44.45 mm x 2.15 mm thick, shutter vertical section 85 mm x 44.45 mm x 1.80 mm thick, shutter middle section 83.50 mm x 44.45 mm x 2.40 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to sliding type /openable frame and channel as directed and as per IS specifications including 5.5 mm thick tinted glass / 12 mm thick prelaminated particle board and required handles, tower bolt, hydraulic floor spring, locking arrangements of Godrej make, rubber gasket and door stopper complete all as specified and as directed.
Supply and fix three track aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 kg/RM, sides and top not less than 0.826 kg/RM double rebated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium alloy powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali with all standard fittings complete all as specified and as directed.
Supply and fix rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290. Gde-E-165 complete all as specified and as directed.
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified
Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.
Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of MS tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. MS frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
Supply and fix 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.
Supply and fix Aluminium, anodised, handles of 150 mm long, extruded section, complete all as specified and as directed.
Supply and fix for Aluminium, anodised, tower bolt, length of bolt in 150 mm of extruded section, complete all as specified and as directed.
Supply and fix aluminium anodised louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed.
Material and labour for preparation of cement plastered surface of any description and applying three coats of white wash on walls complete all as specified and as directed.
Material and labour preparing the new concrete or plastered suface of wall and applying two coats of cement based paint over one coat of primer complete all as specified and as directed.
Material and labour for preparation of cement plastered surface of any description and applying three coats of white wash on ceiling complete all as specified and as directed.
Supply and fix vitreous china squatting pan of long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and as directed.
Supply and fix for PVC valveless, syphonic action type, flushing cistern capacity of 10 Litres, low level, white, with inlet, ball valve, float and handle including brackets including PVC flush pipe of 32 mm dia, complete all as specified and as directed.
Supply and fix vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets or fastner complete all as specified and directed.
Supply and fix for vitreous china bowl type urinal, half stall type white (minimum), with waste coupling of PTMT, including flushing cistern, flush pipe and waste pipe complete all as specified and as directed.
Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60gms) complete all as specified and as directed.
Supply and fix pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.
Supply and fix steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.
Supply and fix Angle Stop valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type). screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.
Supply and fix Bib taps 15 mm bore, brass CP, fancy type (long shank)., with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
Supply and fix Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed, complete all as specified and as directed.
Supply and fix 15 mm dia PVC connection pipe 450 mm long with two fly nuts complete all as specified and as directed.
Supply and fix three layered rotational moulded polyethylene water storage tanks 500 ltrs capacity, white, ISI mark embosed on it, (cylindrical vertical with closed top) hoisted & fixed in position all as specified and as directed.
Supply and fix 20mm dia ball brass valves high pressure with polythene float valve & fly nut screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fix PVC(SWR) sewage pipe 110 mm dia, type 'B' single socketed in any length with rubber ring joints fixed to wall or floor with PVC clamps complete all as specified and as directed.
Supply and fix PVC(SWR) sewage pipe 75 mm dia, type 'B' single socketed in any length with rubber ring joints fixed to wall or floor with PVC clamps complete all as specified and as directed.
Supply and fix PVC (SWR) junction single, (Single T) equal or unequal with access door 110mm dia type 'B' complete all as specified and as directed.
Supply and fix 100/110mm bore PVC (SWR) bends, type 'B' any radius, duck's foot or heel rest complete all as specified and as directed.
Supply and fix 75mm bore PVC (SWR) bends, type 'B' any radius, duck's foot or heel rest complete all as specified and as directed.
Supply and fix 110mm dia PVC (SWR) `P' or S' trap type 'B' complete all as specified and as directed.
Supply and fix for PVC (SWR) cowl, type 'B' suitable for pipes of 110 mm bore complete all as specified and directed.
Supply and fix for PVC (SWR) floor trap, type 'B', diameter of outlet in 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed.
Excavation in trenches for n.exc 1.5m deep and 1.5m wide and manholes not exc 10 sqm on plan in any type of soil and getting out in any type of soil complete all as specified and directed.
Material and labour for plain cement concrete (1:2:4), type B1 using 20mm graded stone aggregate as in copings, benching and including necessary form work weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.
Material and labour for 15 mm thick rendering on fair faces of brick work in CM (1:4) finished even and smooth without using extra cement mixing and including approved integral liquid water proofing compound as mentioned in manufactures instructions complete all as specified and as directed.
Material and labour extra for forming fair finished drain or drain channel 30 cm inner grith in cement concrete using extra cement including forms moulds mitred stoped end etc completed all as specified and as directed.
Material and labour for precast cement concrete (1:2:4), type B1 using 20mm graded stone aggregate as in cover slabs for septic tank , soakwell, manholes etc set in cement mortar (1:6) including necessary form work complete all as specified and as directed
Material and labour for plain cement concrete bed to drain pipe of 150mm bore laid to slope including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2, using 40mm graded crushed stone aggregate complete all as specified and as directed.
Material and labour for Reinforced cement concrete pipes, class NP2, laid and jointed complete with collars 150mm bore laid and jointed on cancrete bed complete including testing complete all as specified and as directed.
Material and labour for plain cement concrete bed to drain pipe of 200mm bore laid to slope including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2, using 40mm graded crushed stone aggregate complete all as specified and as directed.
Material and labour for Reinforced cement concrete pipes, class NP2, laid and jointed complete with collars 20mm bore laid and jointed on cancrete bed complete including testing complete all as specified and as directed.
Material and labour for brickwork with fly ash bricks straight or curved on plan exc. 6 m mean radius built in CM(1:4) complete all as specified and as directed.
Supply and installation of 3D printed hollow Wall panel facade, non-load bearing external wall, with layered 3D printed texture, unpainted description of 3D printed concrete panels including jointing the ends with accessories as per manufactureres instructions with following specifications :- (i) Minimum 28 days Compressive strength shall be 20 MPa. (ii) Minimum width of printed layers in panel shall be 30 mm. (iii) Composition of the concrete mix per cubic meter of concrete would be in the following range, and meet the requirement of 20 MPa in hardened state. OPC 53 grade cement: 400kg minimum - 700 kg maximum; Fly ash: 300 kg minimum - 800 kg maximum; Sand: 400 kg minimum - 800 kg maximum; Water: 500 kg maximum; PCE based super plasticizer: 5 kg maximum. (iv) Provision of anchorages for lifting will be provided in each panel MAKE :- MiCoB Pvt Ltd or Equivalent
Supply and fix three layered rotational moulded polyethylene water storage tanks 1000 ltrs capacity, white, ISI mark embosed on it, (cylindrical vertical with closed top) hoisted & fixed in position all as specified and as directed.
Supply and fix 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections fitted/sealed with M-seal including joints fixed to wall complete all as specified and as directed.
Demolition and breaking up drain pipes (salt glazed ware/AC/RCC) set in cement mortar for 150mm to 300mm dia pipe all as specified and as directed.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
Material and labour for machine pressed precast ceement concrete interlocking paver blocks with grey cement and pigments any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.
Excavating over areas, n exc. 1.5 m deep and getting out; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., getting out in hard dense soil
Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) of any shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed over and including 15mm thick screed bed in CM (1:6) set and joined in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) of any shade polished, area of each tiles not exceeding 0.36 sqm,as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing caot in cement mortar (1:4) complete all as specified and as directed.
Material and labour for preparation of new plasterd surfaces of wall/ceiling and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer over 3mm thick wall care putty on wall/ceiling complete all as specified and directed
Material and labour for preparation of new plasterd surfaces of wall and applying two coats of waterproofing exterior emulsion paint over two base coat/ two coats of primer as per manufacturer instructions complete all as specified and as directed. MAKE :- Apex Ultima Protek of Asianpaints, excel top guard of Nerolac, weathercoat long life 10 yrs of Berger NOTE :- Filling of cracks,holes and dents are deemed to be included in the quoted rates.
Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm drawn through in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one light point or one fan/ exhaust fan point controlled by one, one way switch including PVC switch board of required size and 3mm thick hylam sheet screwed with 04 nos cadmium coated screws and cup washers on existing MS concealed box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed.
All as per Sl Item No 88 above for one three pin 5 Amps socket outlet point with cables of 1.5 sq.mm size on same board.
All as per Sl Item No 88 above but for one three pin 5 Amps socket outlet point with cables of 1.5 sq.mm size on independent board.
All as per Sl Item No 88 above but FRLSH copper stranded cable of size 2.5 sq.mm for 3/6 pin socket outlet 15 Amps on one independent board alongwith all fittings and accessories complete.
Material and labour for surface submain wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 4.0 sq.mm (nominal area) drawn through in and including PVC casing caping/PVC conduit of suitable size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 4 sq.mm as earth lead and connected to earth dolly all as specified and as directed. NOTE :- Two runs of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
Supply and fix 5 Amps switch piano type single pole one way all as specified and as directed.
Supply and fix socket outlet flush type 6 Amps, 5 pin, 230v all as specified and as directed.
Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps, 230v all as specified and as directed.
Supply and fix ceiling rose surface bakelite three terminals all as specified and as directed.
Supply and fix sheet metal enclosure MCB DB SPN 08 way double door, 240 Volts AC all as specified and as directed.
Supply and fix MCB, SPN (double pole) 32 Amps, 240 volts, 10 KA ‘’C” curve all as specified and as directed.
Supply and fix MCB, single pole, 5 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve all as specified and as directed.
Supply and fix lamp holder with insulated body with back plate suitable for batten fitting all as specified and as directed.
Supply and fix LED lamp 12 watt, CDL, B-22 (Pin type), 230V, PF-0.95 (min) all as specified and directed by Engr-in-Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making of suitable hole in brick / stone wall for fixing of exhaust fan complete all as specified and as directed.
Supply and fix LED light batten, 20 watt, 4 feet, AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. MAKE :- Wipro Cat part No-LL20-221-XXX-65AL1 or equivalent in CG/Philips/Havells
Supply and fix LED light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat part No-LL20-111-XXX-65NE3 or equivalent in CG/Philips/Havells
Supply and fix LED building security light 20 watt, 230 volts complete with all accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable, one GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamp and fasteners all as specified and as directed by Engr-in-Charge. MAKE :- CG Cat Part No LSTS-20-CDL-M or equivalent in Philips/Bajaj / Wipro
Material and labour for earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as directed by Engineer-in-charge.
Supply and fix Energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed. MAKE :- Orient/Havells/Usha
Supply only bottled water dispenser, having cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs, heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs, working in R-134A refrigerant complete all as specified and as directed by Engr-in-Charge.
Supply and fix sheet metal enclosure MCB DB SPN 04 way double door, 240 Volts AC all as specified and as directed.
Material and labour for earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long burried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification complete all as specified and as directed.
Supply, lay and testing 25mm bore medium grade galvanized pipe with all fittings such as tee bends, union, elbow, reducer etc laid in trenches/fixed to walls/floors, ceilings all as specified and as directed.
Supply and fix 25mm bore gun metal gate valve, cast type, screwed down, high pressure with iron wheel handle, screwed both ends for iron pipe or unions complete all as specified and as directed.
Cutting existing 25 to 32mm bore steel tubing for alteration or additions (each cut shall bemeasured) including earth work and accessories like dummy plug, union socket etc in any condition all as directed by Engr-in-charge.
Material and labour for XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 10 sq.mm, 2 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.
Material and labour for dry river sand as in cushioning to underground cables in trenches including spreading, levelling, hand punning and consolidating, complete all as specified and as directed. NOTE :- punned thickness of 18 cm will only be measured for payment.
Material and labour for Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.
Material and labour for road cutting to lay the GI pipe for protection of UG cable including making good the surfaces with ready mix cold bitumen to match the existing road surface complete all as specified and as directed. NOTE :- GI pipe shall be paid and measured saperately.
Material and labour for plain cement concrete as in foundations, filling and mass concrete of type D2 (1:4:8) using 40mm graded stone aggregate, complete all as specified and as directed. NOTE :- (i) Mass conrete is required in road cutting. (ii) Conractor has to deploy sufficient labour, T&P and metal / wooden ply sheet of required size to make a PCC block of not less than 20cm x 20cm x 30cm (having 10cm block base below ground level) around GI pipe at various locations, as directed by Engineer-in-charge. (iii) Rate quoted are deemed to be inclusive of above mentioned works.
Supply and laying in trenches/fixed to wall high density polyethylene pipes (HDPE) 40 mm bore, including all fittings complete all as specified and asdirected.
Material and labour for XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 25 sq.mm, 4 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.
Material and labour for XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 16 sq.mm, 2 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.
Supply and laying un-reinforced precast cement concrete cable covers, class LV, type 1, flat size 250mm x 150mm x 40 mm all as specified and as directed.
Supply and lay GI tubing 80 mm dia light grade ISI mark embosed on it, laid in trench/fixed on walls as in cable protection complete all as specified and as directed.
Supply and fix LED street light 45 Watt including making electrical connections to the fitting with suitable size of service wire all as per Crompton Cat Part No. Raptor PRO-I, CRP-409-45-57-SL-GL-NSG or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm x 300mm finial taper plug, pole cap, bolts, nuts and washers screws, pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410 SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumineous paint for portion embedded in concrete complete all as specified and as directed NOTE :- Excavation and earth work ,PCC in foundation / plinth block / coping shall be measured and paid separately.
Disconnecting and taking out existing SMC of any size and in any position on pole, supply and fix sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 sq.mm UG cable including supply and fixing of one in Nos MCB SP 6-32A including cable glands- 2 Nos, and two way connector 1 No complete all as specified and as directed.
Supply and fix PVC sheathed 1100 volts grade flat three core stranded aluminium conductor of size 2.5 sq.mm including conduit pipe connecting from SMC box to street light fitting complete all as specifed and as directed.
Supply and fix street light mounting bracket, made out of light grade GI tubing 32 mm bore, bent into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm mild steel strip, nut, bolts 12 mm dia with washers complete fixing arrangements complete all as specified and as directed.
Supply, install test and commissioning of factory made feeder pillar box of size 600 x 800 x 300mm, 3 phase and 4 wire outdoor type, front door made out of 3.15 mm thick MS sheet including 1.1KV, colour coded aluminium busbar with mounting insulators and all internal wiring with suitable aluminium strip with nuts, bolts etc. duly powder coated and mounting on 10x25x4mm angle iron frame cable gland for all out going and incoming cable, writing indication for all MCCBs, danger indication sticker including dismantling existing panel board with complete all as specified and directed comprising of the following accessories:- (a) Indicator lamp RYB -3 Nos. (b) TPN 40 Amps -01 Nos. (c) SPN 20 Amps -01 Nos. (d) MCB Protected 15 Amps socket 02 in1 - 02Nos.
Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent. NOTE: If the desired result not obtained after testing the contractor should do re-eathing without any extra cost.
Supply and fix float valves, brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 25mm dia pipe complete all as specified and directed.
Material and labour for construction of valve chamber of size 600 x 600 x 600 mm, with 230mm thick brick work in cement mortar(1:4), with Plain Cement Concrete (1:4:8), type D2 as in sub base, 15mm thick plastering on internal and exposed external surfaces in cement mortar (1:4), valve chamber cover made out of MS sheet 3.00mm thick, welded on angle iron frames 40x40x4 mm as in double door type with hinges and locking arrangement with 4 leavers Godrej lock,75mm size duly painted with two coats of black bituminiouspaint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for cutting the existing GI/CPVC pipe of 50 mm dia and connecting the new pipe line for pressure booster including all joints all as specified and as directed.
Supply and install hi wall split units indoor/outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality of capacity 2 TR with BEE 5 star rating complete all as specified and as directed.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with on single pole MCB 20 Amps, 240 Volts with top plug complete all as specified and as directed.
Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and wall hanging type designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V 15 A with accuracy of ± 2.5% and 4 to 6 sec initial delay of capacity suitable for 2 Ton Air conditioner complete all as specified and as directed. MAKE :- V Guard Model VND 500 15A or techno commercially equivalent models specified in PS
Supply and installation of IP camera all as per SECURE EYE Cat No. 3MPI 3MEGA / 12 MM LEN or equivalent complete all as specified and as directed.
Supply and installation of NVR port all as per SECURE EYE Cat No. NVR4 or equivalent complete all as specified and as directed.
Supply and installation of hard disk 2 TB capacity all as per SEAGATE Cat No. SKYHAWK or equivalent complete all as specified and as directed.
Supply and installation of POE switch all as per SECURE EYE Cat No. 4AP - 2UE 4 PORT or equivalent complete all as specified and as directed.
Supply and installation of CAT6 cable all as per HONEYWELL 100mtr 24 AWG or equivalent complete all as specified and as directed.
Supplying and fix switch flush type, 15 Amps, single pole, one way, 230 volts AC circuit complete all as specified and as directed.
Supply and fix stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100 Watt complete all as specified and as directed.
Supplying, fixing, connecting and testing 1x20 Watt luminarie including suitable LED driver and connecting with cable and including mounting accessories complete all as specified and as directed.
Supply and fix MCB, triple pole and neutral, 63 Amps, 415 Volts, 'C' series 10 KA breaking capacity complete all as specified and as directed.
Supply and fix sheet metal enclosure (DB) for MCCB, vertical type, 4 way, triple pole and neutral, 415 volts, double door with 200 Amps rated bus bar with IP 54- IK 09 MAKE :- Legrand Cat No 5076 40 or equivalent in / L&T/ ABB/Schenider.
Supply and fix earth continuity conductor or main earthing lead of size 25 x 4 mm GI strip fixed to wall drawn in conduit / pipe or any other indicated situation for loop earthing etc., complete all as specified and as directed.
Supply, install, test & commissioning outdoor type LT panel box of CPRI approved make confirming to relavent IS, factory made with 3 mm thick CRCA sheet duly powder coated and suitable size to accomodate all accessories/fittings with suitable size of copper power wire and angle iron frame with following accessories compartmentize in construction to accomodate incoming/outgoing cables and connecting copper wire including foundation for fixing angle iron frame for panel all as specified and directed by Enge-in-Charge. comprising of the followings : a) Aluminium bus bar chamber capacity 200 Amps 3 Phase 4 wire duly insulated with PVC sleeves (As per colour code) incl complete control wiring with suitable size PVC copper conductor cable b)MCCB 100 Amp, 4 pole-01Nos (incoming). b) TPN MCB 63 Amp- 02 Nos, (Outgoing) c) SPN MCB 40 Amp-03 Nos, d) SP MCB 6-32 Amp-04 Nos. e) indicating lamp RYB- 01 set, f) Ammeter & Voltmeter each one, g) Aluminium Bus bar h) one digital timer, j) One contactor 40 A, 240 Volt NOTE :- (i) Panel shall be CPRI type tested and to be fabricated in ISO certified panel manufacturing factory - Panel Make- Success Engineers, Bhosari/ABB/ L&T
Material and labour for XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 16 sq.mm, 4 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.
Material and labour for XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 50 sq.mm, 3.5 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.
Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Demolition of reinforced cement concrete as in ground floor and paving below or above GL and removal of rubbish off the primeses complete all as specified and as directed.
DARSHAN ENTERPRISES
Aishwarya Constructions
Vastushilpa Contrustion
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .