Construction of 1 Class Room building for PUMS Soganur, Arakkonam Block in Ranipet District under NSNOP Scheme

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

F0040) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well

CSMP0002)Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement

BMP0006) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement

BMP0007) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure b) In Ground floor

BMP0008) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure b.In Ground floor

F0026) Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0005)Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

GR0001) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

EL0041) Supplying and fixing 15amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3 mm thick

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

RE0006) Providing Pre-Constructional Antitermite treatment

CS0037) supplying and fixing of precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in standardised concrete mix M-20 grade II. 40mm thick (a) In Ground Floor

C0065) Providing and Laying in position, standardised concrete mix M-20 grade a) In Foundation and Basement

b) In Ground Floor

F0013) Supply and filling in foundation and basement with gravel

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

EL0002) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable a) Light point with ceiling rose

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for FAN POINT controlled by 5 amps flush type switch

EL0026) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for 5 amps. 5 pin plug socket point at Switch Board Itself

EL0034) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials.

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor a) 48 Electric fan 1200mm sweep

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990, 1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials

C0020) Providing Rain water harvesting pit of 1m dia and 600mm depth and filling the pit with 40mm stone jelly to a depth of 300mm from the top of the augering portion and filling with crushed stone sand to a depth of 300mm over the stone jelly and covered with the pre-cast perforated slab of 40mm thick (using M20 mix) Providing pit

a) Augering 30cm dia

EL0618) Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the new walls with two coats of approved best Exterior Emulsion paint Outer walls

PA0043) Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for at least 48 hours.

PA0001) White washing three coats using clean shell lime slaked

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

FLMP0010) Supplying and fixing of Ivory colour Vitrified Tiles of size 600x600x8mm for flooring and other similar works in cement mortar 1:3 20mm thick

EL0047) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire

EL0100) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet a) 25W LED Street Light Fitting with LED

EL0193)Run off the 2 wires of 4sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc... all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection single phase) [Open Wiring]

MS0089) Providing Wall Black Board in two layers of cement mortar plaster in cement mortar 1:5 (one cement and five crushed stone sand), 20mm thick and second layer of combination mortar 1:1:6

JD0100) Manufacturing, supplying and fixing of STEEL DOORS with following specification. MS Angle of size 40 x 40 x 6 mm at 3.5 Kg/m used for outer frame and MS Angle of size 35 x 35 x 5 mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32 x 6 mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. a. Double Leaf Door

JD0101) Fabricating, supplying and fixing of MILD STEEL WINDOW CUM EMERGENCY DOOR for emergency exist with top window portion grill with MS shutter openable type upto sill portion covered with MS sheet using section of 30 x 29 x 5mm thick of Door frame. a. Double Leaf Door with Double Leaf Shutter

JW0047) Manufacturing, supplying and fixing in position of STEEL SHEETED WINDOWS with the following specifications. Outer frames of Windows made of 'Z' Section F7D of size 33 x 25 x 3 mm at 1.419 Kg/m and mullion 'O' Section (F&B) of size 46 x 25 x 3 mm at 2.28 Kg/m and shutter section of made of F7D of 33 x 25 x 3 mm at 1.419 Kg/m as specified in IS 7452/1990. a. Four leaves windows

Please Enable Macros to View BoQ information