REPAIR REPLACEMENT OF CERTAIN UNSERVICEABLE PARTS, PAINTING POLISHING OF WOODEN STEEL FURNITURE UNDER GE EM RR HOSP, DELHI CANTT 10

Amount

REPAIR TO ALMIRAH MED STEEL FD-1032/87M :- Dismantling of unserviceable legs from Almirah Med Steel, S & F of new legs made out of 1 mm thick PBI Sheet made to shape and size by welding duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, mild grinding complete all as specified and directed by the Engr-in-Charge.

S & F new shelves made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable shelves all as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S & F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable three way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge.

Dismantling of unserviceable lock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge

S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle.

S&F Cover for locking asssy duly painted as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle.

S & F bottom of Almirah made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable bottom all as specified on drg.

S & F MS cleats made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete all as specified and directed by Engr-in-Charge.

M&L for dismantling of existing unserviceable MS Butt Hinges & S & F new S S Butt Hinges with suitable screws as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge.

Dismantling of unserviceable keyhole cover. S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg.

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES FD-1031 :- Dismantling of unserviceable legs from Almirah Large Steel with shelves, S & F of new legs made out of 1 mm thick PBI Sheet by welding duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, mild grinding complete all as specified and directed by the Engr-in-Charge.

S & F new shelves made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable shelves all as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S & F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable three way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge.

Dismantling of unserviceable lock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge

S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle.

Cover for locking asssy duly painted as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle.

S & F bottom of Almirah made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable bottom all as specified on drg.

M&L for dismantling of existing unserviceable MS Butt Hinges & S & F new S S Butt Hinges with suitable screws as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge.

Dismantling of unserviceable keyhole cover. S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg.

REPAIR TO ALMIRAH LARGE STEEL 1/2 H, 1/2 S (FD/E6/MAP/18)/FD -1033 :- S & F stainless Steel hanging rod of size 25 mm, 1 mm thick to Almirah Steel of approved quality as specified and shown in drg.

Dismantling of unserviceable legs, S & F of new legs made out of 1 mm thick PBI Sheet by welding duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, mild grinding complete all as specified and directed by the Engr-in-Charge.

S & F shelves made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable shelves all as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S & F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable three way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge.

Removal of unserviceable lock. S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge

S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle.

S & F Cover for locking asssy duly painted as shown in drg or as directed by Engr-in Charge after removal of old unserviceable locking cover.

S & F bottom of Almirah made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable bottom all as specified on drg.

S & F MS cleats made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete all as specified and directed by Engr-in-Charge.

Removal of existing unserviceable MS Butt Hinges. S & F new S S Butt Hinges with suitable screws as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge.

Removal of unserviceable keyhole cover. S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg.

BED HARD (MAP) (FD/E6/MAP/08(R) :- Removal of old unsv 12 mm thick ply wood from top of bed. S & F new 12 mm thick (7 Ply) commercial plywood BWR grade, to be fixed with appropriate sizes of MS nuts, bolts and washers without having any joints complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable 18 mm thck pre laminated partical board from head board and S&F new 18 mm thick exteior grade MDF Pre laminated board of approved shade with 4mm thick seasoned teakwood beading all round with suitable screws with the cleats complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable 18 mm thck pre laminated partical board from foot board and S&F new 18 mm thick exteior grade Pre laminated MDF board of approved shade with 4mm thick seasoned teakwood beading all round with suitable screws with the cleats complete all as specified and directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge.

Removal of old unsv and rusty long rail (25x65mm rectangle pipe) from Bed Hard (Map) and S&F new long rail (25x65mm rectangle pipe 18 gage) Shape and Size as per drwg duly painted and as directed by the Engr-in-Charge.

Removal of unserviceable head board complete from Bed Hard (Map) S&F new head board complete shape and size as per drwg. all as specified and directed by Engr-in-Charge.

Removal of unserviceable foot board complete from Bed Hard (Map) S&F new foot board complete shape and size as per drwg. all as specified and directed by Engr-in-Charge.

Removal of old unsv/rusty stiffner from bed and S&F new stiffner 25x25mm,18 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge.

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220/1122) : S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer , including removal of old unserviceable ply top.complete all as specified and directed by Engr-in-Charge.

Removal of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed by Engr-in-Charge.

S&F for dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Sr No 19 to the required size for short rail including threading at both ends complete all as specified and directed by Engr-in-Charge.

Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 20 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

Supply and fixing MS flat iron of size 40mmx5mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as specified and directed by Engr-in-Charge.

Supply and fixing MS flat iron of size 40mmx5mm thick , 150 mm long between long rail and short rail on each corner, providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as specified and directed by Engr-in-Charge.

M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed by Engr-in-Charge.

CHAIR STEEL TUBULAR WITH ARM/WITHOUT ARM ( FD- 5): Removal of old/Unsv seat from chair tublar steel with arms and S & F new seat made of teak wood 1st class of size 50mm widex25mm thick fixed to frame with appropriate size steel screws to chair tubular steel with arm all as shown in drawing including caning with 2 to 2.5 mm wide and 0.4 mm thick plastic cane as per Godrej pattern and Border of 3 to 4mm thick cane seat to be polished with French polish black/teak shade all as specified and as shown on drawing .

All as per item Sr No 50 herein before above but back of chair tubular steel with arms

Removal of old/unsv handle from chair tublar steel with arms and S&F new handle made of teak wood 1st class all as specified and as shown on drawing.

S&F new flat iron strip under the wooden seat/back of size 20 mm x 5 mm of chair tubular steel with/without Arms all as specified and shown on drawing and complete all as specified and directed by Engr-in-Charge.

Removal of seat from chair tublar steel without arms and S&Fnew seat made of teak wood 1st class of size 50mm widex25mm thick fixed to frame with appropriate size steel screws to chair tubular steel withot arm all as shown in drawing including caning with 2 to 2.5 mm wide and 0.4 mm thick plastic cane as per Godrej pattern and Border of 3 to 4mm thick cane seat to be polished with French polish black/teak shade all as specified and as shown on drawing .

All as per item Sr No 05.05 herein before above but back of chair tubular steel without arms

Removing of Old unserviceable PVC shoes and supply and fixing of new shoes of PVC of required size as shown in drawing and aooroved by GE/Engr-in-Charge.

REPAIR TO LOCKER BED SIDE STEEL FD-1029/563/(71) :- M&L for dismantling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable MS screws of approved quality complete all as specified and directed by Engr-in-Charge.

M&L for dismantling of existing unserviceable Hasp and Stapple and S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed by Engr-in-Charge.

M&L for dismantling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing colour over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding as per drg and complete all as specified and directed by Engr-in-Charge.

S & F shelves made out of 1 mm thick MS sheet duly painted with two coats of paint over a coat red oxide primer made to shape and size after removal of unserviceable shelves all as specified on drg.

Removal of existing unserviceable Hinges. S & F new Hinges with suitable screws/welding as per specification and as per drg. all as specified and directed by Engr-in-charge.

S & F stainless Steel hanging rod of size 20 mm, 1 mm thick to Almirah Steel of approved quality as specified and shown in drg.

Removal of unsv bracket for hanging rod and S & F New bracket for hanging rod shape and size as per drg and directed bu Engineer incharge.

SCREEN MOVABLE 3 FOLD STEEL Drg No HFD-2015 :- S&F Washable Synthetic cloth size 2430 x1680mm (in three Parts) of light pastle colour(Green) shall be fixed with hooks and spring (Cloth not less than Rs 95/- Per Meter and size as per drg and complete all as specified and directed by Engr-in-Charge.

Removing of old unsv Caster Wheel and S&F New Caster Wheel made of superior Quality complete all as per drg and directed by Engr-in-charge

REPAIR TO TABLE OFFICE CLERK STEEL FD-307/1004 :- Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F New drawers with appropriate size , with locking device as per drg and as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

Removal of old unsv broken leg from Table office clk steel and S & F new leg made of out of 25mm square MS tube wall thickness 1.25mm made to shape & size as pe drwg duly painted.

Removal of old unsv lock from Table office clk steel and S&F new lock 4 lever with 2keys fixed to drawer with appropriate screw/welding as per drwg.

Removal of old unsv drawer handle from drawer of Table office clk steel and S&F new drawer handle shape and size as per drwg.

REPAIR TO TABLE OFFICE OFFICER STEEL FD-1002/1003/FD-84(M): Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F New drawers of appropriate size as per existing item, with locking device after removable of old/unsv drawer as per drg and as directed by Engr-in-Charge.

Dismantling of existing unserviceable Shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drg and as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge.

Removal of old unsv broken leg from Table office ofiicer steel and S & F new leg made of out of 25mm square MS tube wall thickness 1.25mm made to shape & size as pe drwg duly painted.

Removal of old unsv lock from Table office officer steel and S&F new lock 4 lever with 2keys fixed to drawer with appropriate screw/welding as per drwg.

Removal of old unsv drawer handle from drawer of Table office officer steel and S&F new drawer handle shape and size as per drwg.

TABLE BED SIDE STEEL (FD-157/HFD-2005): Removing of old unserviceable broken top of table bed side steel and supply and fixing of new top made out of 18mm thick prelaminated exterior grade-I MDF.Teak wood 1st class beading 4mm thick all around duly french polished shall be provided. all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removing of old unserviceable knob with locking strip & supply and fixing of new knob with iron strip and locking strip made out of flat iron 15x3 mm duly approved by GE/Engr-in-Charge.

Removing of Old unserviceable and broken rusty legs and supply and fix of new legs made out of MS square pipe 25mmx25mmx18 gauge as per shape/size shown in drg. Fixing of legs shall be done by gas welding continusoly and smoothened with file steel as approved by GE/Engr-in-Charge.

Removing of Old unserviceable PVC shoes and supply and fixing of new shoes of PVC of required size as shown in drawing and aooroved by GE/Engr-in-Charge.

Removal of old unsv Knob and S&F new knob of best quality.

BED STEAD FOWLER TYPE-I WITH MATTRESS (FD-2002) :- M&L for removal of unserviceable castors, S&F new castor 100mm dia fix type, as per Drg.

All as S No 84 above, but castors 100mm dia with bracket as per Drg.

M&L for removal of unserviceable parts of crank Mechanism with Handle and Nuts/Bolts, S&F new crank Mechanism with Handle wound lever operated backrest at foot end.Handle to fold inwards when not in use.Head raise range 0-80 and knee raise Range 0-45 Degree.Trendeleberg and RT upto + 15 Deg Height 620-825mm, fix in position.All as per Drg/Direction of Engr-in-charge.

Removing of all old/unsv mattress and S & F new Mattress of size 6 to 6.5ft x03 ft x5 inches of superior Quality. Preferable(Sleepwell/Kurlon/Dunlop) with ISI Mark. The IFD (Indentation Forcec Deflection)/ILD(Indentation Load Deflection) rating structure of Mattress conforming 50 density.

Removing of all old/unsv and S & f new Pre laminated MDF board 18 mm thickness of Head & Foot boards 230X30. all as specified and shown on drawing and directed by GE/Engr-in-charge.

TEAPOY VARAMDAH Drg No FD-255 :- Removing of old unsv Top of Teapoy varandah and S&F New Table Top of 18/19mm prelaminated MDF Board duly Fixed with Teek wood Beeding all around side of Board with Suitable Adhesive complete all as specified and directed by Engr-in-Charge.

PVC Shoes at bottom of Legs

TEAPOY VARAMDAH MAP Drg No FD/E6/MAP/17 Removing of old unsv top of teapoy and S&F new Top of Teapoy of 18/19mm thick Pre laminated MDF board (Archid/Centure/Green Ply) duly Fixed with Teek wood Beeding all around side of Board with Suitable Adhesive complete all as specified and directed by Engr-in-Charge.

Removing of old unsv shoes and S&F New hard Rubber/PVC Shoes complete all as per Drawing and complete all as specified and directed by Engr-in-Charge.

Removing of old unsv legs and S&F new made of 18mm square MS pipe made to shape and size as per drwg duly painted.

Removing of old unsv base tray and S&F new bas tray made of 5mm dia MS bar made to shape and size as per drwg duly painted.

RECANING OF CHAIR VARAMDAH Recaning the Chair Varamdah with 4mm to 4.5mm wide half round plastic cane white/cream colour in matt pattern all as specified and shown on drawing and as directed by Engr-in-Charge

M&L for denting and painting of Almirah Large Steel With Shelves (Different colour scutter and sides as directed by Engr-in-charge) with one coats of synthetic enamel paint with spraying machine (Inner and Outer surface i.e Almirah, Lokcer, table office steel and Table Bed side steel) (Paint and colour as approved by GE/Engr-in-charge) including preparation of old painted steel/iron surface after scraping old paint from steel/iron surface of steel furniture all as specified and shown on drawing and directed by GE/Engr-in-charge :-

All as per item No 96 here-in-before but Almiraha Large Steel 1/2 H x 1/2 Shelves (Different colour scutter and sides as directed by Engr-in-charge)

All as per item No 96 here-in-before but Almirah Medium with shelves (Different colour scutter and sides as directed by Engr-in-charge)

All as per item No 96 here-in-before but Bed Hard MAP

All as per item No 96 here-in-before but Chair Varamdah

All as per item No 96 here-in-before but Chair Varamdah MAP

All as per item No 96 here-in-before but Locker Bed Side Steel (Different colour scutter and sides as directed by Engr-in-charge)

All as per item No 96 here-in-before but Screen Movable 3 Fold

All as per item No 96 here-in-before but Table Clk Steel

All as per item No 96 here-in-before but Table Office Officer Steel

All as per item No 96 here-in-before but Table Bed Side Steel

All as per item No 96 here-in-before but Table Bed side (Map)

All as per item No 96 here-in-before but Bed Flower Type I&II

All as per item No 96 here-in-before but Stool Steel 305x305

All as per item No 96 here-in-before but Chair tublar steel with arms/without arms

All as per item No 96 here-in-before but Table computer

REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :- Removal of old unsv Ply from Bed Hard and S&F new Ply 12mm thick (7Ply) commerical BWR grade Make of ply Kit Ply/Green ply/Century shape and size, as per drg and directed by Engr-in-charge.

S&F in replacement of unserviceable long rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg or as directed by Engr-in-Charge.

S&F in replacement of unserviceable short rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge.

Removal of old unsv head board and S&F new head board rest outer ply to be replaced by 3 mm thick ply wood one side teak faced and inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg and as directed by Engr-In-Cahrge.

Dismantling of unserviceable Foot board of Bed ply top, S&F new foot rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS secres and as per drg and as directed by Engr-in-Charge

S&F of first class hard wood (teak) corner 100mmx100x25mm bracket be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge.

Removal of old unsv stiffner from Bed Hard and S&F new stiffenr, shape and size as per drwg.

BIN LIENUN MULTI PURPOSE (FD/E6/MAP/09) :- Removing of old unsv handle of Door and Drawer and S&F New Handle Complete all as per drawing and directed by Engr-in-Charge

Removing of old unsv Magnetic clatcher and S&F New Megnetic clatcher complete all as per drawing and directed by Engr-in-charge

Removing of all unsv Door of Bin Lienun and S&F New Door made of 18mm thik Prelaminated Partical Board Exterior Grade duly Fixed with Teek wood Beeding all around side of Board with Suitable Adhesive complete all as per drawing and Directed by Engr-in-Charge

Removing of old unsv Drawer and S&F New Drawer complete all as per drawing and directed by Engr-in-Charge

Removal of old unsv top from Bin lienen multi purpose and S&F new top made out of 18mm thick prelaminated partical board both sides laminated exterior grade duly covered with 4mm thick teak wood beeding, shape and size as per per drwg.

Removal of old unsv sides from Bin lienen multi purpose and S&F new sides made out of 18 mm thick prelaminated partical board both sides laminated exterior grade duly covered with 4mm thick teak wood beeding, shape and size as per per drwg.

Removal of old unsv Shelf from Bin lienen multi purpose and S&F new shelf made out of 18mm thick prelaminated partical board both sides laminated exterior grade duly covered with 4mm thick teak wood beeding, shape and size as per per drwg.

Removal of old unsv Back ply from Bin lienen multi purpose and S&F new Back ply of 12mm thick commerical BWR grade,shape and size as per per drwg.

Removal of old unsv leg of Bin lienen Multipurpose and S&F new leg made of out first class hard wood teak , shape and size as per drwg.

CHAIR DINING CB Drg No FD 228/279 :- S & F for removing the following existing broken or unserviceable components of wooden furniture items from Chair dining CB and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Front Leg

Rear Leg

Side Rail

Front Rail

Rear Rail

Stiffner H type (set of three)

Top batten

Corner

PVC Shoes at bottom of Legs

CHAIR EASY Drg No FD-229 :- S & F for removing the following existing broken or unserviceable components of wooden furniture items from Chair Easy and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Front Leg

Rear Leg

Side Rail of Seat

Front Rail of seat

Back Rail of seat

Side Rail of Back

Lower Rail of back

Upper Rail of back

Arm Rest

Stiffner

PVC Shoes at bottom of Legs

CHAIR WRITING Drg No FD-280 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Chair writing and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Front Leg

Rear Leg

Side Rail

Front Rail

Back Rail

Arm Rest

Stiffner

PVC Shoes at bottom of Legs

Chair Dining Offr Drg No Drg No FD/MAP-II/04 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Chair Dining Offr and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Front Leg

Rear leg

Side Rail

Back Rail

Front Rail

Upper stiffner of back

Corner set of 8

Curved stinffner back

PU Foam of seat of 75mm Thick density 40 duly covered with superior quality Tepastry Cloth (rate not less then 250/- per meter) shape and size as per drwg.

12mm thick plywood commerical BWR grade and 4 nos of corners for seat fixed with suitable screw, shape and size as per drwg.

PVC Shoes at bottom of Legs

CHAIR WRITING (MAP) - (FD/E6/MAP/12) :- Removing of old unsv 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round from seat and S&F new 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round. (Note Fabric cloth not less than Rs 250/- per meter) Shape and size as per drg.

Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge

Removing of old unsv Shoes and S&F New PVC/Rubber Shoe complete all as per drg and Directed by Engr-in-Charge

PEG TABLE (FD-277/236/384) :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Peg Table and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Leg

Long Rail

Stiffner

Short Rail

Removing of old unsv top from Peg table and S&F new top made of 18mm prelaminated partical board both side laminated exterior grade, shades of top as approved by GE.

PVC Shoes at bottom of Legs

TABLE CENTRE (Drg No 235/274) :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table Centre and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Leg

Long Rail

Long stiffner

Short stiffner

Removing of old unsv top from table writing and S&F new top made of 18mm prelaminated partical board both side laminated exterior grade, shades of top as approved by GE.

PVC Shoes at bottom of Legs

HAT STAND WITH MIRROR FD-233 :- Removing of old unsv the existing broken or unserviceable components of Hat stand with mirror and S&F new components to Hat stand with mirror shape and size as per drg and as directed by Engr-in-Charge. Aluminium peg hook as per drg

4mm thick teak venear ply front side with 4mm thick teak wood beading

Back ply 6mm thick comerical

Looking mirror with 4mm thick teak wood beading as per drg

TABLE BED SIDE MAP Drg No FD/E6/MAP/15(R) :- Removing of old unsv the existing broken or unserviceable components of table bed side MAP, S&F new components of Table Bed Side MAP, shape and size as per drg.Prelaminated Partical board both side laminated exteior grade (Archid/century/GreenPly) with 4 mm thik teek wood beeding shall be fixed whereever reqd as per drawing and as directed by Engr-in-Charge. Top

Back Ply 6mm

Drawer Handle

Drawer with telescopic channel as per drg.

Pull out tray with telescopic chaneel as per drg.

Front leg 18mm square MS Pipe, 18 gauge.

Back frame 18mm square MS Pipe, 18 gauge.

PVC Shoes at bottom of Legs

TABLE 900 x 600mm WITH/WITHOUT DRAWER Drg No FD-283 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table 900x600mm and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Top of table made out of 18mm thick prelaminated partical board both side laminated exterior grade duly covered with 4mm thick teak wood bedding.

Long Rail

Short Rail

Drawer

Long stiffner

Short stiffner

Corner

PVC Shoes

TABLE DINING 6/8 PERSON Drg No FD-273/376/FD/MAP-II/03/04 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table dining 6/8 person and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Top of table dining 6 pers made out of 18mm thick prelaminated partical board both side laminated exterior grade duly covered with 4mm thick teak wood bedding.

Top of table dining 8 pers made out of 18mm thick prelaminated partical board both side laminated exterior grade duly covered with 4mm thick teak wood bedding.

Long Rail for Table dining 6 pers

Long Rail for Table dining 8 pers

Short Rail

Corner set of 8 size 100x25mm

PVC Shoes

TABLE WRITING Drg No FD-275 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table writing and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Top of Table writing made out of 18mm thick prelaminated partical board both side laminated exterior grade duly covered with 4mm thick teak wood bedding.

Removing of all unsv Door of Table and S&F New Door made of 18/19mm thik Prelaminated Partical Board Exterior Grade duly Fixed with Teek wood Beeding all around side of Board with Suitable Adhesive and piano type hinges complete all as per drawing and Directed by Engr-in-Charge

Removing of old unsv Drawer and S&F New Drawer complete all as per drawing and directed by Engr-in-Charge

Drawer Lock (Harrisson/Link)

Long stiffner

Short stiffner

Long Rail

Short Rail

Long leg

Small leg

Back ply 6mm of box

Corner

PVC Shoes

TABLE COMPUTER Drg No FD/E6/MAP/03 :- Removing of old unsv table top of Table Computer and S&F new top of Table Computer made of 18/19mm thick prelaminated partcle board both side laminated exterior grade with PVC beading alround in existing pattern all as specified and as directed by Engr-in-Charge

Removing of old unsv Key Board all around PVC biddding with telescopic Channel and S&F new Key Board made out of 18mm prelaminated partical board both side laminated covered with PVC beading alround with Telescopic Chanel as approved by Garrision Engr with suitable Size Screw and Adhesive complete as per Drawing and Director by Engr-in-Charge.

Removing of old unsv Knob and S&F new Knob complete all as per Drawing and Directed by Engr-in-Charge

Removing of old unsv leg frame with leg and Nylon Buffer and S&F new leg frame made out of 25x50mm rectangle MS pipe with leg and Nylon Buffer complete all as per Drawing and Directed by Engr-in-Carge

Removing of old unsv drawer complete and S&F new drawer complete with telescopic channel shape and size as per drg.

Removing of old unsv and rusty side frame and S&F new Side Frame made out of 25mm square MS pipe,18 gauge shape and size as per drg.

Removing of old unsv partical board from side frame and S&F new 18mm thick prelaminated partical board both side laminated to side leg frame.

Removing of old unsv mouse tray and S&F new mouse tray with telescopic channel shape and size as per drg.

Removing of old unsv lower frame 25mm square MS pipe and S&F new lower frame made out of 25mm square MS pipe shape and size as per drg.

Removing of old unsv bottom shelf and S&F new bottom shelf made out of 18mm thick prelaminated partical board both side laminated exterior grade shape and size as per drg.

Removing of old unsv top frame from table computer and S&F new frame made out of 25mm MS square pipe 18 gauge shape and size as per drg.

TABLE DRESSING LADIES (FD-251, FD/Map-II/07) :- Removing of old unsv 6mm ply from Mirror table dressing ladies and S&F new 6mm thick commercial plywood BWR grader on back of mirror frame all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removing of old unsv 6mm thick commercial plywood from back of table dressing box and S&F new 6mm thick commercial plywood BWR grade from back of table dressing box all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removing of broken/unsv looking mirror from table dressing ladies and S&F new looking mirror 5.5 mm thick all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removal of old unsv almn channel and S&F new suitable size aluminum channel (of length as required for each table dressing) all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removing of old unsv drawer and S&F new drawer (with telescopic channel) made to shape and size as per drg.

Removing of old unsv sliding glass and S&F new 5 mm thick sliding glass pane including guide roller all as specified and shown on drawing and directed by GE/Engr-in-charge.

Removing of old unsv legs and S&F new legs of table dressing ladies made out of 1st class hard wood teak shape and size as per drg.

Removing of old unsv top from table dressing ladies (box) and S&F new top made out of 18mm thick prelaminated partical board both side laminated exterior grade shape and size as per drg.

Removing of old unsv side from table dressing ladies (box) and S&F new side made out of 18mm thick prelaminated partical board both side laminated exterior grade shape and size as per drg.

Removing of old unsv magnetic catcher and S&F new magnetic catcher of best quality all as specified in drg.

Removing of old unsv handle and S&F new SS handle 75mm "D" shaped of best quality all as specifed in drg.

Removing of old unsv piano type hinges and S&F new piano type hinges of best quality all as specifed and shown in drg.

Removing of old/broken stool from table dressing ladies (Map) and S&F new stool complete (foam covered with upholstery and castor wheel) all as specifed shown in drg.

SOFA SET 5 SEATER (3 Pcs) Drg No FD 373/281 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table dining 6/8 person and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Rear Leg

Front Leg

Side Rail

Arms Rest

Front Rail of 3 Seater

Rear Rail of 3 Seater

Upper Rail of 3 Seater (Back seat)

Batten

Front Rail of Single Seater

Rear Rail of Single Seater

Upper Rail of Single Seater (Back seat)

Bottom sitfnner (Seat) 3 Seater

Back stiffner (Back) 3 Seater

Bottom sitfnner (Seat) Singl Seater

Back stiffner (Back) Single Seater

PVC Shoes at bottom of Legs

Removal of old unsv foam cushion from Sofa Set 5 Seater and S&F new Foam Cusion 21' x 22' x 4' thick, 40 density duly covered with tapestry cloth of approved quality/shade. The Cost of tapestry cloth shall not be less than Rs 250/- per meter. All as specified and shown on drawing and as directed by Engr-in-Charge.

RECANING OF ALL TYPES OF CHAIR (CHAIR EASY, CHAIR DINING, CHAIR WRITING, STOOL DRESSING ). Taking out existing worn out/unserviceable cane from Chair Easy, Chair Dining ,Chair Writing & Stool Dressing and recaning the same with half round 2.002/2.5mm wide 0.4mm thik white plastic cane as per Godrej pattern all as specified and shown on drawing and as directed by Engr-in-Charge

Labour for cleaning and Preparation of old treated wooden surfaces of any description and applying two Coats polish for the following wooden furniture and as directed by Engineer-in-Charge. Bed Hard Ply Top

Chair Dining CB

Chair Dining Offrs

Chair Easy

Chair Writing

Hat Stand

Peg Table

Sofa 5 Seater Complete

Stool Dressing

Stool Dressing MAP

Teapoy Wooden

Table Centre

Table 3 x 2 with/without Drawer

Table Dining 6 Person

Table Dining 8 Person

Table Writing

Table Dressing Ladies

Table Dressing Gents

Table 3x3

Bin Multipurpose

AAY AAY CONSTRUCTION

SMS Enterprises