Combined package - Partial Turnkey Basis - Work-A-Alternate source to 66/11kV K&C valley, Golf Link S/S, Work-B- 66/11kV K.Belthuru S/S, Work-C- 66/11kV Meluru(Alalakuppe) S/S, Work-D- 66/11kV Basapura(Sagare) S/S

STATION SUPPLY PORTION -WORK INDENT-2386:

Power Transformers:

66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of ...

Nitrogen Injection fire extinguishing system (NIFPS) including Erection & commissioning as per technical specification & the recommendations of the supplier of the fire fighting system.

Total-66kV Circuit breakers

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators. ...

b) Upright mounting type with earth switch with terminal connector suitable for DRAKE ACSR. (Live point height 4250 mm)

c) Upright mounting type without earth switch . (Live point height 4600mm)

d) Upright mounting type without earth switch . (Live point height 5500mm)

e) Upright mounting type without earth switch. (Live point height 6350mm)

11 kV Isolators:

a. 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR for outgoing feeders.

b. 11 kV isolator, double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for capacitor bank

Current Transformer : Current Transformer including Marshalling box, Single Phase, Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor as per Technical ...

ii) 66KV Class, 40KA, CT of ratio 400-200/1-1-1A for Tr. Lines.

For metering : Accuracy 0.2S, Burden 10 VA

For backup protection : Accuracy 5P20. Burden 30 VA

For differential /Distance protection ...

iii) 66KV Class, 40KA, CT of ratio 200-100/1-1-1A for Tr. Transformers.

For metering : Accuracy 0.2S, Burden 10 VA

For backup protection : Accuracy 5P20. Burden 30 VA

For differential /Distance pro...

iv) 11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with suitable terminal connector as per technical specificati...

Voltage Transformer : Voltage Transformer 66KV, Single Phase, Oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for Drake ACSR complete as per tec...

Surge Arrestors (Porcelain housing) Metal Oxide Gapless type, as per Technical Specification (with Surge Monitors & Insulating Base):

i) 60kV, 10kA Class - III, for UG cable.

ii) 60KV, 10KA, SM type for Over head lines

iii) 60KV, 10KA, SM Type for Transformer

9 kV, 10KA station class with connector and clamp

CAPACITOR BANK of 12.1 kV, 2.9 MVAr Star Connected, Double Bank

Design, engineering, supply, erection, testing & commissioning of Capacitor Bank with internal fuses, terminal connector, Neutral CTs o...

Relay & Protection Panels:

Simplex type control and relay panels complete as per specifications:

110V DC compatible to SCADA compatible as per technical specification.

a)For 66kV UG cable with cable d...

b) For Power Transformer 66/11 KV

c) For 66KV Transmission line.

1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components.

2. The DLMS protocol energy met...

Total Station & Mounting structures (excluding Bolts & nuts)-Mild steel

B) Rigid Bus with Taps & Clamps as per Technical specifications:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter:

b) 63mm size connecting isolator to vertical tap

b) 50mm size connecting isolator to vertical tap

Straight taps Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end:

a. suitable for 63mm

b. Suitable for 50mm

iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side:

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV

v) Flexible type Terminal Connector cross bus Aluminium tube to connect isolator:

a. suitable for 63mm

b. suitable for 50mm

c) 75mm Aluminium tube to connect isolator of bus PT

End cap suitable for 50mm aluminium pipe

i. Post Insulators - Cylindrical solid core as per IS5350, Part II & III

a. 66 kV Class, 1 Unit/Stack.

i) T Clamp suitable for for Drake to Drake ACSR wedge connector

ii) Post insulator clamp suitable for single Drake ACSR and 66 kV Solid Core Insulator.

c. C Type Wedge Connector suitable for Drake - Coyote (Line)

(Added CS27 of Cable Supply portion)

Auxiliary Transformer:

Station Auxiliary Transformer with oil, outdoor type, 100kVA, 11 kV/433V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% as per technical...

C) 11 kV ODS and take off structure :

Double pole structure with 9.5 Mts. RCC poles, 300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing 9kV light...

b. DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter compl...

A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, 1Nos I/C MCCB 200A + 2Nos 3 phase, 63A OG HRC fuse + 2Nos 3 phase, 32A OG HRC fuse + 6Nos 3 phase, 16A HR...

A.C. Distribution Box (Outdoor) :

i) AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/G...

LT Power armoured UG Cable as per specification with glands/lugs/ferrules :

a. 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

STATION BATTERY & BATTERY CHARGER :

i) 110V, 200AH Battery set consists of 55 Nos. of cells Plante/Grid/Nickel Cadmium Type with accessories as per specification.

ii) Battery charger suitable for 110V, 200AH, Battery set with Float Cum Booster type battery charger as per specification

DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc., co...

1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ Glands as per technical specifications:

i) 19 C x 2.5 Sqmm

ii) 4 C x 4 Sqmm

(Added SS76 of Station Supply portion)

iii) 4 C x 6.0 Sqmm

iv. 10 C x 2.5 Sqmm

iv. 4 Core 2.5 Sq.mm.

(Added SS77 of Station Supply portion)

v. 2 Core 2.5 Sq.mm.

vi. 2 Core 6 Sq.mm. (including Yard lighting)

vii. 4 Core 25 Sq.mm.

viii. 4 Core 10 Sq.mm.

a) 11 KV, XLPE Insulated UG Cable as per Technical Specification:

i. 11KV XLPE cable, 1000sqmm Aluminium cable from 66/11KV transformers to 11KV Switchgear.

ii. 3C X 240 Sq. mm (11kV switchgear to take off DP structure)

iii. 3C X 95 Sq. mm(11kV switchgear to auxiliary Transformer).

b) Cable Termination kits suitable for following sizes as per technical specification.

i. 1000 Sqmm Single Core (ia) Indoor

1000 Sqmm Single Core (ib) Outdoor

ii. 240Sq. mm 3 Core (iiia) Indoor

240 Sq. mm 3 Core (iiib) Outdoor

iii. 95Sq. mm 3 Core (iiia) Indoor

95 Sq. mm 3 Core (iiib) Outdoor

Equipments required for establishing SCADA Communication as per KPTCL Specification:

a) Remote Terminal Unit (RTU) 64 (I/O) Port

b) Data Concentrator Unit (DCU)

c) 2kVA online UPS (230V AC 1 phase 50Hz) with Battery

c. Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

d. Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

e. Supply Cables-Copper Core with c/s 4sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

f. Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand 1core for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STAND:

Foam type extinguisher (Mechanical) 50 Ltr. capacity

Foam type extinguisher (Mechanical) 9 Ltr. capacity

Water type (gas pressure type) 9 Ltr. capacity

Carbon di-oxide type 4.5 kg. Capacity

Sand type G.I Buckets 15 Ltr. Capacity

Steel stands for above to have 4 buckets to each stand.

MAINTENANCE TOOLS AND PLANTS:

Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

Telescopic ladder Aluminium 6 Mtr. Height

Ring spanner set

Tube spanner set

Pipe wrench 24 inch

Pipe wrench 18 inch.

Hydraulic crimping tools up to 1000 Sq.mm

Rubber hand gloves (15 kV tested)

Rechargeable 5W LED Hand Torch

Insulated cutting plier 12 inch size

Insulated cutting plier 8 inch size

Line live tester AC/DC 500 V

Screw driver 18"

Screw driver 12"

Chain pulley block 5 ton cap

Hydraulic jack 5T capacity

Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.

Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

Insulation megger 2.5 - 5 kV - Digital type

Insulation megger 500 V

SF-6 Gas leak detector / Gas filling.

Multimeter electromechanical

Multimeter Electronic

DC Voltmeter range -5V to + 5V

Hydrometer syringe suitable for vent holes

Specific gravity correction chart

Wall mounting type holder for Hydrometer

Thermometer with wall mounting holder

Protective goggle

Acid resisting jars (4 pint capacity)

Rubber shoes knee height

Grounding sticks

MISCELLANEOUS ITEMS (size/capacities to be got approved)::

Rubber mats 1000 mm x 2000 mm x 12 mm size suitable for 15kV class.

Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.

Water filter / Water purifier : Wall mounting type (Aqua-guard type).

Sub-station name board duly painted as per specification including erection & Civil Works.

Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved).

Danger board ( prohibited ) with support structure including fixing in front of the gate.

Equipments name plates and earthing name plates including fixing at outdoor yard.

Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :

Steel Almirahs 6 1/2 feet

Steel Almirahs 6 1/2 feet with glass panel doors

Officers tables

Steel Slotted angle rack (big Size)

Steel Slotted angle rack (small Size)

Executive revolving chairs

S Type Arm Chairs

Steel folding Chairs

STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder)

Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

CABLE SUPPLY portion-Work Indent-2386:

38/66 kV (Earthed), 1C X 630sqmm stranded, annealed, copper conductor, circular, conductor screen, cross linked polyethylene (XLPE) insulation, core screen, sem...

Insulated shield break type Joint suitable for 66 kV, 1C X 630/240 Sq mm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification.

b. Three Phase Link Box : Three phase Link box without SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 110kV & 66kV, 1000/630/...

c. Three Phase Link Box : Three phase Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 110kV & 66kV, 1000/630/400...

Terminal connectors to connect cable end termination to the Aluminum Rigid pipe (50mm nominal diameter X 60.03mm) / Drake Conductor heavy type with bolts & nuts and washers, complete.

Optical Fibres and accessories:

24 Fibre Dual Window Mono Mode (DWMM) Optical Fibre Cable as per technical specification

Polyvinyl Lubricated Bond (PLB/HDPE) pipe OD 40 mm

Line Interface Unit for Optical Fibre Cable : 24F

Straight Joint Kit for Optical Fibre Cable : 24F

Collars for PLB pipe

Fiber to Ethernet Media Converter : 10/100/1000 Mbps

Fabrication & Supply of galvanised 66kV Transmission Line Towers:

Note :- Rate to be quoted on per 't' basis

66 kV Leela Venture design - Narrow based CTT -2nos.

i) Hight Tension steel includi...

ii) Bolts & Nuts

(Added SS25 of Station Supply portion)

Conductor & Earthwire:

Drake ACSR for Plain Terrian

(Added SS26 of Station Supply portion)

7/3.15 mm Ground wire (In plain terrain)

(Added SS28 of Station Supply portion &

LS11 of Line Supply portion)

Tower Accessories:

Phase plate (Set of 3 No.)

Grounding of tower including cost of 40 mm dia 2.5 mm thick, class 'C' G.I Pipe of 3 meters length as per specification with 50*6 mm GI Flats 3 meter long, salt, charcoal

Copper earth bond 450 mm

INSULATOR STRINGS WITH CLAMPS, ARCING HORNS AND HARDWARE for ACSR Coyote Conductor & DRAKE ACSR:

Double Tension string of 2X5 units of 120kN Disc Insulators each along with hard ware for DRAKE ACSR a...

Vibration dampers for Coyote

C Wedge Conector for Drake-Drake ACSR

Vibration dampers for DRAKE

LINE SUPPLY PORTION-Work Indent-2386:

Total weight of Tower parts- Mild Steel

Note: Rate to be quoted on per t Basis.

Total weight of Tower parts- Bolts, nuts & washers

Note: Rate to be quoted on per t Basis.

Tower Accessories:

1.Number Plates

2.Danger Boards

3.Circuit Plate

4.Phase Plate (set of 3 No.)

5.Earth bond of 300mm Long

6.Earth bond of 450mm Long

6. Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal

(Added SS27 of Station Supply portion)

Insulator Strings for Coyote Conductor: 66kV line:

A. Tension insulator strings consisting of 66kV, 90 kN Composite polymer long Rod Insulators with sectional length -725 mm

B. Suspension insulator strings consisting of 66 kV, 90 kN Composite polymer long Rod Insulators with sectional length -625 mm

Insulator Hardware:

A.Single Tension Clamp with hardware and arcing horn suitable for 90kN Tension Type Composite polymer long Rod Insulators to suit Coyote ACSR

B.Double Tension clamp with hardware and arcing horn suitable for 90kN Tension Type Composite polymer long Rod Insulators to suit Coyote ACSR

C.Single Suspension Clamp with hardware and arcing horn suitable for 1x4nos. of 90kN insulator to suit Coyote ACSR

D. Double Suspension Clamp with hardware and arcing horn suitable for 2x4nos. of 90kN insulator to suit Coyote ACSR

Accessories for Coyote Conductor:

2.Repair sleeves for Coyote Conductor

3.P G Clamps for Coyote Conductor

4.Vibration dampers for Coyote Conductor

5.Preformed armour rod

Accessories for 7/3.15mm Earthwire:

2.Repair sleeves for Earth Conductor

3.P G Clamps for Earth Conductor

3.Single tension clamps (Bolted type)

5.Single Suspension clamps (Bolted type)

Station Erection

STATION ERECTION (including testing & commissioning) PORTION WORK INDENT-2386:

Power Transformers:

66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding with OLTC ONAN/ONAF with fan control...

Total-66kV Circuit breakers

66kV Isolators-Total

11kV Isolators-Total

iv) 11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with suitable terminal connector as per technical specificati...

Voltage Transformer : Voltage Transformer 66KV, Single Phase, Oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for Drake ACSR complete as per tec...

60kV Surge arresters-Total

9 kV, 10KA station class with connector and clamp

66kV C&R panels-Total

Total Station & Mounting structures (including Bolts & nuts)

Formation of Main/Cross Bus with Single Drake

Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter

i. Post Insulators - Cylindrical solid core as per IS5350, Part II & III

a. 66 kV Class, 1 Unit/Stack.

Auxiliary Transformer:

Station Auxiliary Transformer with oil, outdoor type, 100kVA, 11 kV/433V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% as per technical...

C) 11 kV ODS and take off structure :

Double pole structure with 9.5 Mts. RCC poles, 300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing 9kV light...

b. DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter compl...

A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, 1Nos I/C MCCB 200A + 2Nos 3 phase, 63A OG HRC fuse + 2Nos 3 phase, 32A OG HRC fuse + 6Nos 3 phase, 16A HR...

A.C. Distribution Box (Outdoor) :

i) AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/G...

STATION BATTERY & BATTERY CHARGER :

i) 110V, 200AH Battery set consists of 55 Nos. of cells Plante/Grid/Nickel Cadmium Type with accessories as per specification.

ii) Battery charger suitable for 110V, 200AH, Battery set with Float Cum Booster type battery charger as per specification

DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc., co...

1.1kV Cable-Total

11KV Switchgear :

11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+2CB+1AP (Remote Annunciation cum Control panel) with C...

Total - 11kV Cable

Total - Fixing of pot heads for 1core HT cable

Total - Fixing of pot heads for 3core HT cable

Equipments required for establishing SCADA Communication as per KPTCL Specification:

a) Remote Terminal Unit (RTU) 64 (I/O) Port

b) Data Concentrator Unit (DCU)

c) 2kVA online UPS (230V AC 1 phase 50Hz) with Battery

Integration of RTU, DCU and UPS with field equipments

Total - Communication cables

Dismantling portion:

CIRCUIT BREAKER:- SF6 Gas Circuit Breaker with semi-pneumatic/pneumatic operated/spring type operating mechanism, including mounting structures arrangements with rigid, bi metalli...

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required with solid core cylindrical post insulators.

Relay & Protection Panels :

110V DC compatible to SCADA

Mounting structure including Bolts & Nuts Lattice type:

i) 66 kV Isolators live point height 4600mm -2no.

Transportation of released materials using 10T Lorry Upto 250km - from 66/11kV K&C valley S/S to Major works store

Earthmat formation:

Supplying and laying MS flat 75X12mm flat welding and applying ACB paint to welded portion and covering with soil as per drawing/standards without Sodium Bentonite clay (all mater...

Supplying and laying MS flat 75X12mm flat welding and applying ACB paint to welded portion and covering with soil as per drawing/standards with Sodium Bentonite clay (all materials to be supplied by ...

Providing MS Round rod 1.075 metre long earthmat spikes including heating, bending top 50/75 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and we...

Providing 25mm dia, 1.05mtr. long Earthmat Spike of MS Rod including bending top 50mm etc and connecting to earthmat as per specification

Grounding of equipment with 75X12 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connec...

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...

Deep Bore Earthing:

Sinking bore using fast rig including fixing of MS Rod, including jointing the pipes as per KPTCL standard and providing sodium bentonite treatment in the annular space, including ...

b) 40 mm dia MS Rod

c) Bentonite Clay

Cost of GI flat for joining two rods by welding to obtain continuous length

Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,

Supplying & fixing Equipments name plates/ earthing name plates/ danger boards.

Station Mandatory spares supply

Station Mandatory spares supply portion-Work Indent-2386:

Circuit Breaker (CB):

Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB

SF6 Gas (40% of total gas Qty.) for Sub-Station

Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)

Terminal Connector (For one Complete Isolator for 72.5KV Class)

Terminal Pad (For one Complete Isolator for 72.5KV Class)

Cable mandatory spare supply

CABLE MANDATORY SPARES SUPPLY-Work Indent-2386:

Normal Straight Joints suitable for 66kV(E) 1 -core 630 sqmm copper conductor XLPE, Lead sheathed cable

(Added CS2 of Cable Supply portion)

Outdoor type cable end termination suitable for 66kV (E) 1 -core, 630 sqmm lead sheathed cable including PVC earthing cable.

(Added CS5 of Cable Supply portion)

Normal Straight through Joints suitable for 66kV(E) Single Core 1000sqmm to 66 kV 630sqmm UG cable, segmental compact type miliken copper conductor, XLPE, Lead sheathed cable.

(Added CS4 of Cable Su...

Link boxes,1-phase outdoor structure mounting type with SVL/CCPU and PVC earthing cable including the cost of 1cx1000 Sq.mm copper cable

(Added CS6 of Cable Supply portion)

CABLE ERECTION (including TESTING & COMMISSIONING)-Work Indent-2386:

GPS including profiling by using computer aided techniques as detailed in the scope of work, includes the following:

Drawing the r...

Laying (including Testing & commissioning) of 66kV single core, 630sqmm XLPE Copper cable in trefoil, tapping , fixing pipes for drain and gate crossing as per drawings & specifications in trench pi...

Handling & making normal straight joints/Insulated shield break type joint for EHV 66 kV power cables with all consuambles at site complete etc complete.

Normal Straight through Joints suitable for 66kV(E) Single Core 1000sqmm to 66 kV 630 sqmm UG cable, segmental compact type miliken copper conductor, XLPE, Lead sheathed cable. (Jointing existing 66...

Handling & making of cables end termination for 66kV ehv singal core XLPE copper cable with all consuambles at site complete

Erection of single phase earth link boxes, on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts completely

Erection of Three phase earth link boxes, on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts completely

Supplying and providing PVC Warning Tapes 200mm wide & 300 Microns thick as per specifications, drawings and directions of the Engineer incharge of the work.

Laying Unarmoured Underground FO Cable (12F/24F/48F DWSM)

Handling and making OFC end terminal (LIU suitable for 12F/24F/48F)

Handling & making normal straight joint closures for 48 Fibre (DWSM) optical fibre cable with all consumables at site complete.

Erection of Transmision Line Towers (including sorting of towers, loading, unloading, stub setting, transportation of templates from one location to another, aligning, fixing of tower accessories,tack...

Conductor & earthwire:

a) Installing insulator strings complete with necessary Hardwares, Installing and stringing of ACSR DRAKE conductor including fixing of conductor accessories, tower accessories ...

b) Installing and stringing of 7/3.15mm earthwire including fixing of earth wire accessories and hardwares as per technical sepecifications

Tower accessories:

a. Supplying and fixing G.I. Angle iron 45 x 45 x 5 mm (1 m length) with cleats, bolt & nuts as per specification and fixing above 0.5 m length each at inner and outer surface of th...

Supplying and fixing Barbed wire

Grounding of tower including cost of 40 mm dia 2.5 mm thick, class 'C' G.I Pipe of 3 meters length as per specification with 50*6 mm GI Flats 3 meter long, salt, charcoal including excavation charges

LINE ERECTION PORTION-Work Indent-2386:

Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ord...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor:

Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent ...

b. Earth wire-7/3.15mm

Erection of Transmision Line Towers (including sorting of towers, loading, unloading, stub setting, transportation of templates from one location to another, aligning, fixing of tower accessories,tack...

Tower accessories:

a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...

Supplying and fixing Barbed wire as per Technical specifications

c.Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including excavation cha...

Dismantling existing towers-Total

Releasing of the Conductor in the existing line involving about one span after replacement of tower (Coyote)

Releasing of the Ground wire in the existing line involving about one span after replacement of tower.(66 KV)

Releasing and Re-erection of existing Coyote conductor

Releasing and Re-erection of existing Ground conductor

STATION CIVIL PORTION-Work Indent-2386:

Earth work excavation for Foundation by Manual means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shori...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and fixing 10 mm thick acid and or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Fixing all types and all capacities of fluorescent /false ceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required N...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25mm including the cost of materials, labour charges, required tools and plants etc., complete. W...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base includin cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical...

Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, tran...

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and f...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Clearing and grubbing land including uprooting rank vegitation, grass, bushes, shrubs, saplings and trees, removal of stumps of trees cut earlier and disposal of serviceable material etc., complete as...

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

CABLE CIVIL PORTION-Work Indent-2386:

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition o...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Bituminous courses

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Granular course

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...

Supplying and construction of RCC M20 Cable Joint Bays to accommodate jointing of UG Cable as per specifications, drawings. The rate includes the cost of material, labour charges, curing, form work,...

Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....

HDD method for 66kV UG Cable work: Installation of 3rows of HDPE pipes PE 80 PN6 of 250 mm dia using Horizontal directional drilling technique (HDD method) including preparing and setting up the plant...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Construction of Granular Sub-Base of grading VI material as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader o...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Dense Graded Bituminous Macadam Grading - II for traffic lesser than 20 MSA

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specif...

Bituminous Concrete Grading II for traffic lesser than20 MSA

Providing and laying Bituminous Concrete with 100 TP capacity hot mix plant batch type using crushed aggregates of specified grading, premi...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

LINE CIVIL PORTION-Work Indent-2386:

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...