Reorganising, shifting, diversion and extension of HT/ LT overhead lines for power supply arrangement to Contractual Mobile Crusher (M/s. PRTPL) on as and when required basis for a period of one year at Dipka Expansion Project.

Amount

Erection of long steel tubular poles (upto 11 metres) including excavation and refilling and secured with holding clamps, bolts, nuts etc. as required

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of ACSR/ AAAC Dog conductor including uncoiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding of insulators and jumpering

Stringing of ACSR/ AAAC Rabbit conductor including uncoiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding of insulators and jumpering

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel wherever required all complete

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supply and erection of galvanised D Iron clamps complete with shackle insulator (75mm x 90 mm), GI bolts, nuts and washers, coach screws etc. as required

Dismantling of pole/ street light standard / strut embeded in cement concrete foundation etc. as required.

Dismantling of overhead lines comprising of copper/ aluminium overhead conductor, GI wire, cross arms, insulators, etc. as required

Providing and fixing of overhead line spacers (inner dia: 1/2" and thickness: 2mm) made of PVC pipes with suitable clamps for use in 4- wire LT Overhead lines with rabbit conductor

Note: The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 09 nos.

Total impact of GST for the purpose of CTC

V R ENTERPRISES

POWERTEK INDIA

SHASHI BHUSHAN SINGH