Improvement of Black Spots on various roads under Nalagarh Sub Division (SH- C/o Speed Breaker, Cat Eyes etc.)

Amount

P/L a priming/ tack coat with bituminous VG-10 @ 0.35 kg/ sqm on bituminous/priming surface, the surface shall be swept clean with the mechanical broom and high pressure air jet or by other means as directed by the Engineer-in-Charge as per IRC 16- 2008 clause 4.3.4, 4.3.4.4.3.4.2 and 4.3.5, within all leads and lift as per the entire satisfaction and direction of Engineer-in charge

Providing, laying Bituminous Concrete with 100-120 TPH batch type hot mix plant providing of 75 tonne per hours using crushed aggregate of specified grading premixed with bituminous binder @ 5.4 to 5.6 percent of mixer and fillers, transporting the hot mix to work site laying with hydrostatic paver finisher with cencer control to the required grade , level and alignment, rolling with smooth wheeler, vibrating and fonder roller to achieve the desired compection as per MORTH specification clause-509 complete in all respect ( 30 mm. thick), within all leads and lift as per the entire satisfaction and direction of Engineer-in charge

Providing & fixing of road stud 100 x 100 mm dia cast in aluminiu, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphalticsurface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4)1973, within all leads and lift as per the entire satisfaction and direction of Engineer-in charge

Providing and laying hot thermoplastic paint strip 2.5 mm ( two pint five milimeter) thick with imported road marking materials conforming to British specification 3262 with 20 % ( twenty pecent ) glass beeds having reflective of 1.5 mm ( one point five milimeter) with 75 % ( seventy five percent ) spherical and indigenous or foreign ( paint having sufficient strength of with stand heavy load without deformation and having softening point 250 to 300 ( two hundred fifty degree to three hundred degree ) more than the climate temperature of the area in a width of 0.10 mtr. ( zero point ten metre ) strip in white colour according to Ministry of surface Transport specification and IRC 35 and as per the direction of Engineer-in-charge including all leads and lifts and carriage of materials., within all leads and lift as per the entire satisfaction and direction of Engineer-in charge

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawingand technical specification 1701 600 mm equilateral triangle, within all leads and lift as per the entire satisfaction and direction of Engineer-in charge

SALOCHANA DEVI

Chuni Lal

Mohit Kumar