Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.6 L
EMD Value
₹19,500
Closing Date
6 Dec 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE JAl Shakti Shimla Rural Division at Sunni
EE JAl Shakti Shimla Rural Division at Sunni
C/o Delivery tank , Mono Submersible pump LJ of pipe line C .o Protection wall (Under PDNA
2025_HPIPH_121727_1
SNN-SML-003-740-Tdr-25-38-48 dt19.11.25
Open Tender
Civil Works - Water Works
Item Rate
90 days
EE Sunni
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE Suni
₹19,500
4 Dec 2025
25 Nov 2025
6 Dec 2025
25 Nov 2025
6 Dec 2025
25 Nov 2025
25 Nov 2025 - 6 Dec 2025
Laying and Jointing PVC Pipe. Heading
Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:-
Foundation and Plinth.
Providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:-
i) Foundation and Plinth.
ii) Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.
Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in :
i) Flat surfaces such as soffits and suspended floors, roofs , landing and the like:-
ii) Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like .
Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels.
Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level.
White washing with lime on undecorated wall surfaces two coat to give an even shade i/c thoroughly brooming the surface to remove the dirt, dust, mortar and other foreign matter .
Manfacturing MS Manhole Cover 600x450mm with Frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames, flates etc including welding with locking arrangemets(Locks) (excluding Cement Concrete)
Laying and jointing in trenches, GMS Tubes (M. G.), Tube fittings (earth work in trenches to be measured and paid for separately). 80 mm Dia.
25 mm dia
Providing & Fixing of Brass Full Way Wheel Valve 80 mm Dia complete with all respect. 80 mm dia.
25 mm dia.
Providing smooth finishing in cm 1:3
Steel work weidedin built up section, trusses and framed work i/c cutting,hoisting,fittingin position complete in grating ,framed guards & ladders etc. (V.M 40x40x5mm &H.M 25x25x4mm
Prov. 3 Phase Mono submersible pump set of reputed and approved make i.e. KSB/Hindustan model MR-3 confirming to letest BISspecifications i.e. 8304 . The pump set shall be fixed with free flow impellers of suitable allow as per BIS -8631-1976 with upto date amendmentsfor lifting raw water lubricated bush bearings of suitable alloy and shaft protection sleeves the pump shall be fitted coupled to submercible required cage motor com-pump to BIS 9283-1995 with upto date amendments corresponding to pump, fitted with water lubricated bush bearing alloys and shaft protection sleeve arrangement to counter balance the thrust caused due to water column in rising main and having cooling arrangement. The pump set should include the water level guard, errection clamps , cable clips and capable of following performances.
Static head = 20 mtrs
Discharge = 4 LPS
Dia of Rising main = 65 mm
Length = mtr
Pumping hours = 8 Hour
P/F 3 core copper cable wire 2.5 mm Sqm (Flat Submersible Cable)
P/F control panel for 3 HP Three phase with Amp. Mete,r volt meter, stater MCB water level gurd.
Installation of Pump Set i/c Cutting , welding , Jointing ,complete in all respect at site.
Carriage of Pump Set & Other accessories.
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.
Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portion requiring blasting upto a distance of 20 metres dosposing of un-serviceable materials, stacking serviceable neatly dressing the surface.materials and neatly dressing the surface.
Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering & shuttering in foundation and plinth.
Providing & Fixing of Weep Hole 100 mm Dia PVC Pipe.
Providing Bolder/Stone filling behind R/Wall
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.31 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.18 MB
FORM6.pdf
Tender Documents • 0.16 MB
FORM-8.pdf
Tender Documents • 0.67 MB
terms.pdf
Tender Documents • 0.11 MB
BOQ_178479.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .