Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
1 Jun 2026, 2:00 pmClosed
Single Packet
Normal Tender
No
Total Value Wise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
40
2 conditions
Railway reserves the right to procure the Tendered item from the manufacturer (based on the status of MSE/NSIC/UDYAM etc or any other valid statutory document) or their authorized dealers/agents.The authorized dealer/Agent should submit tender specific authorisation from the OEM/Manufacturer along with the bid.
The bidder should submit the satisfactory past performance credentials of supplying same/Similar item (Similar means goods/items of relevant category) to any zonal railways /production units etc within last 05 (five) Financial Year and current Financial Year up to the date of tender opening. Only such offers shall be eligible for placement of order. The bidder should submit documentary proof i.e R-Note, Inspection certificate along with Supplied PO,CRN/CRAC of GeM Contract etc in support of their claim of credentials /past performance along with offer. If the bidder submits only the PO copies, then railway reserves the right to verify the performance against such P.O from the IMMS database. Only if satisfactory performance is found against such completed P.O then only the performance shall be considered as eligible.
28 conditions
The bidder should go through the Tender Documents consisting of Instructions toTenderers, General Tender Conditions and Special Conditions of Tender, and agree &confirm to abide by the Instructions to tenders, General Tender Conditions, IRSconditions of Contract and Special Conditions of Tender.
The bidder should agree to supply the tendered stores at the rates quoted by him inaccordance with the IRS conditions of Contract and [or] Special Conditions and [or]other Conditions specified/attached with the tender.
Have you gone through the Clause No 6.0 for deposit of Earnest Money as indicatedin Instructions to Tenderers and 13.0 for Security Deposit (SD) as indicated in GeneralConditions of Tender in ECoR Tender conditions uploaded in IREPS website as wellas attached with this tender.
Tenderer's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the tender document Corrigendum if any.
FOR Destination door delivery basis. No other FOR condition will be applicable.
Warranty :24 months from the date of delivery.
All the bidders/tenderers should insure that they are GST complaint and their quoted tax structure/rates as per GST Law and HSN Code
Tenderers/Bidder should go through the 'Revised Tender Document dated. 23.12.2020' available in the IREPS website before submitting their offer especially the clauses 4.0, 5.0 of the instructions to the Tenderers pertaining to EMD and SD. Please note that as per latest guidelines. Non compliance of EMD and SD clause may lead to non consideration of the offers of the firms who are not exempted as specified in the above clauses.
Validity of the offer to be 90 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Odisha · 7 Set total
Automatic Computerized Rake Test Rig
40265302~ECR
40265302
Open - Indigenous
Goods
Odisha
₹0
Exempted
1 Jun 2026
19 May 2026
4 items · 7 Set total
Set of Tamping tools for CSM/DUO (TCTT-NEW) as per Plasser Part no. 1) .CU30.10840 FR I a nd RDSO Drawing No. RDSO/TM/15A/16=08 no's, 2) CU30.10840 FR II and RDSO Drawing No.RDSO/TM/15 B/16=08 no's. 3) CU30.10840 FR III and RDSO Drawing No. RDSO/TM/15C/16=08 no's, 4) CU30.10840 FR I V and RDSO Drawing No. RDSO/TM/15D/16=08 no's Total no. of tools: 32 and RDSO Specification no.TM/H M/6/320(Rev-3, July2019), Make: Plasser IND or its equivalent. [ Warranty Period: 24 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/SD/BLGR, ECOR | Odisha | 2.00 Set |
| Total | 2 Set | |
Set of Tamping tools TCTT for Dy.Express as per Plasser Part no. 1) CU30.10840 FR I and R DSO Drawing No. RDSO/TM/15A/16=32 no's, 2) CU30.10840 FR V and RDSO Drawing No.RDSO/TM/15E/16 =16 no's, Total no. of tools: 48 and RDSO Specification no.TM/HM/6/320(Rev-3, July2019), Make: Plasser IN D or its equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/SD/BLGR, ECOR | Odisha | 1.00 Set |
| Total | 1 Set | |
Set of Tamping tools TCTT for MFI. One set consists of 1) Tamping tool as per Plasser part n o.CU30.10840 FR I and RDSO Drawing No. RDSO/TM/15A/16=08 nos, 2) Tamping tool as per Plasser part n o.CU30.6820 FR I and RDSO Drawing No. RDSO/TM/01A/16=04 nos, 3) Tamping tool as per Plasser part no .CU30.2743 FR I and RDSO Drawing No. RDSO/TM/01B/16=04 nos Total 16nos Tools and RDSO Specificatio n no.TM/HM/6/320(Rev-3, July2019), Make: Plasser IND or its equivalent [ Warranty Period: 24 Months af ter the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/SD/BLGR, ECOR | Odisha | 3.00 Set |
| Total | 3 Set | |
Set of Tamping tools TCTT for UNI 2S/3S, One set consists of 1) Big Tamping tool as per Plas ser part no. W37.1320-52-RA=08 no's and RDSO Drawing No. RDSO/TM/01A/16 2) Small Tamping tool as p er Plasser part no. 2W31.41B=08 no's and RDSO Drawing No. RDSO/TM/01C/16. Total no. of tools :16 and RDSO Specification no.TM/HM/6/320(Rev-3, July2019), Make: Plasser IND or its equivalent. [ Warranty Pe riod: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/SD/BLGR, ECOR | Odisha | 1.00 Set |
| Total | 1 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5778248.pdf
ATTACHMENT
5527282.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .