Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹42.8 L+₹1.3 L (3.16%)Rejected-AOC VILL BONOGRAM PO RANDIA P S BUDBUD DIST BURDWAN PIN 713120 WB | BURDWAN | BURDWAN | WEST BENGAL | 713120 | L2 | Rejected-AOC L2 BIDDER | |
| 3 | L3₹42.8 L+₹1.3 L (3.23%)Rejected-AOC J L BHAWAN MANKAR ROAD BUD BUD BAZAR PO BUD BUD DISTT BURDWAN WB | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC L3 BIDDER | |
| 4 | L4₹43.8 L+₹2.3 L (5.58%)Rejected-AOC 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L4 | Rejected-AOC L4 BIDDER | |
| 5 | L5₹44.4 L+₹3.0 L (7.18%)Rejected-AOC | L5 | Rejected-AOC L5 BIDDER |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
3 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PROJECT PANAGARH
GE PROJECT PANAGARH, PO-PANAGARH, DIST-BURDWAN, PIN-713420
ADDITIONAL / ALTERATION AND ALLIED SERVICES TO BLDG NO A/7/365 AT PANAGARH MILITARY STATION UNDER GE (PROJECT) PANAGARH
2022_MES_522071_1
8142/E8
Open Tender
Civil Works
Item Rate
240 days
GE PROJECT PANAGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (P) PANAGARH
₹88,000
Yes
8 Jun 2022
5 May 2022
6 Jun 2022
5 May 2022
3 Jun 2022
20 May 2022
60 days
Amount
Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and n exc 10 sqm on plan area and getting out in Soft/loose soil complete all as specified and directed.
Excavation in trenches exc 1.5 mtr wide and exc 1.5mtr but n exc 3.0 mtr in depth and n exc 10 sqm on plan area and getting out in Soft/loose soil complete all as specified and directed.
M&L for Hard core of broken stone or boulders of guage exc 63mm but n ec 100mm , deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC (1:4:8), type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete M-25 as in foundation footings, bases for column, plinth beam etc complete all as specified and directed.
M&L for Reinforced cement concrete M-25 as in columns complete all as specified and directed.
M&L for Reinforced cement concrete M-25 in beams, lintels over 1.5m span complete all as specified and directed.
M&L for Reinforced cement concrete M-25 in Chajjas complete all as specified and directed.
M&L for Reinforced cement concrete M-25 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slab and in shelves and like complete all as specified and directed.
M&L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, plinth beams and similar work vertical or batter for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for Use and waste of form work to sides of pillars, posts, struts piers, columns and similar work square, rectangular or polygonal for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for Use and waste of form work to sides and soffits of floor or roof beam, beam haunchings, girders, lintels, cantilevers shelves including supports, overhangs, etc and similar work for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizantal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m nean radius, built in cement morter (1:6) complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 20 mm thick in two layers of 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4, finished even and smooth without using extra cement. Second layer will be mixed with WPC @ 3% by weight of cement complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item of schedule.
Supply only integral water proofing compound.
M&L for Rendering 10mm thick in cement morter (1:3) in ceiling surfaces of concrete, finished even and smooth without using extra cement complete all as specified and directed.
M&L for Two coats of distempering over a coat of primer on newly plastered surfaces of wall including preparation of walls etc complete all as specified and directed.
M&L for Two coats of exterior acrylic emulsion paint over a coat of primer with alkali resistant primer on newly plastered surfaces of wall including preparation of walls etc complete all as specified and directed.
M&L for Three coats of white wash on newly plastered surfaces of ceiling including preparation of ceiling etc complete all as specified and directed.
M&L for 15mm thick cement plaster in cement morter (1:4), finishing even and smooth without using extra cement for laying of roof membrane complete all as specified and directed.
Material and labour APP based polymeric membrane minimum weighing 3.0 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified laid over a coat of bituminous primer @ 0.30 ltr /Sqm & finished with applying bitumen grade 85/25 coat @ 1.2 Kg /Sqm. APP membrane shall be laid by torching with 75mm overlap in longitudinal direction and 150mm overlap in transverse direction all as directed and finished with applying one coat of aluminium paint as directed by Engineer-in-Charge and laid as per specification all as specified and directed.
S&F Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.
S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply,2nd class HW rail & style, the size of rail and stile as per IS: 1003 (part 1), klin seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with beat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealded to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
S&F Steel windows both (inside gauged and outside glazed) glazed and gauged type side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note : Glass and wire mesh shall be measured and paid separately
S&F Steel ventilator with top hang shutter including hinges and steel peg stay, complete all as specified and directed. Note : Glass shall be measured and paid separately under relevant item of schedule.
M&L for Two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description , over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F 300mm sliding bolt of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F 200mm aluminium , anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 75mm butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.
S&F aluminium locking bolts, anodised, with bolt not less than 10mm dia , 100 mm size complete all as specified and directed.
S&F 100mm aluminium , anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F hold fasts and similar articles conforming to Fe290. Gde E-165 complete all as specified and directed.
M&: for plain cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in pressed steel frame, hold fast etc including caps and bases complete all as specified and directed.
M&L for sand filling under floor with clean dry sand in foundations including watering and consolidationcomplete all as specified and as directed.
M&L for 100mm thick, plain cement concrete type D-2, (1:4:8) (using 40mm graded stone agregate) in flooring complete all as specified and directed.
M&L for 40mm thick, plain cement concrete type B-1, (1:2:4) (using 20mm graded stone agregate) in flooring complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15mm thick in cement morter (1:4) for laying of floor finishes complete all as specified and directed.
M&L for joint free coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter (1:4), for backing of ties complete all as specified and directed.
M&L for glazed coloured ceramic tiles on vertical surface 300x 200 x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Hard core of broken stone or boulders of guage n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 50mm thick, plain cement concrete type C-1, using (1:3:6) (20mm graded stone agregate) in Plinth protection and finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade'A' complete all as specified and directed.
M&L for mixing of fly ash, clinker & stone dust in proportion of (1:3 :6) (i.e 10% Fly ash, 30% Clinker and 60% Stone dust materials) laying , watering , ramming compaction complete all as specified and directed.
Removing excavated material n exc 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed.
S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc . Conforming to Fe-410 W (Gde -E-250) quality A complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F anodised aluminium snap grid frame work for false ceiling including GI wire fixed to struss complete all as directed.
S&F 6mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified of capacity 1000 ltr. complete all as specified and directed.
S&F 25mm ball valve high pressure of PTMT with epoxy coated aluminium tod & high b=density plastic ball screwed for iron pipe and fixed. (minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690gms) complete all as specified and directed.
S&F 20mm GI water tubesmedium grade, galvanised with all fittings complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm GI water tubes medium grade, galvanised with all fittings ; and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F wash down water closet (Pedestal pattern and trap) including trap, connection to drain (or out going pipe) and to flishing pipe, antisyphonage pipe etc complete all as specified and directed.
Supply and fix 10 ltr PVC valveless, syphonic action type , flushing cistern, low level, whte, with inlet, ball valve, float and handle including brackets.( Fixing included in fixing of Pedastal pan) complete all as specified and directed.
Supply and fix flush pipe of polythelene of low or high density or PVC 32mm dia, for low level cistern. ( Fixing included in fixing of Pedastal pan) complete all as specified and directed.
Supply and fix plastic water closet seat, black,closed pttern with flat bottom , and cover and mild steel chromium plated or aluminium hinging device.( Fixing included in fixing of Pedastal pan) complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of elngh 450mm complete all as specified and directed.
S&F angle stop valve of PTMT any colour high pressure screwed for oron pipe and fixed, (Minimum weight 15mm-90 gms) complete all as specified and directed.
S&F Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15mm-105gms) complete all as specified and directed.
S&F stop valve of PTMT with long shank and cup (concealed type), minimu weight 15mm-110gms/20mm-112gms) complete all as specified and directed.
S&F swivel shower of PTMT any colour for for fixing with 15m pipe. (minimum weight 40 gms) complete all as specified and directed.
S&F pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms) complete all as specified and directed.
S&F Vitreous china wash basin, wite flat back,size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F Vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F waste coupling 32mm bore dia of discharge pipe of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm -60gms) complete all as specified and directed.
S&F 110mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) Pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F 110mm bore PVC(SWR) junction single, (Single T), equal or unequal complete all as specified and directed.
S&F 110 mm bore (SWR) vent cowl complete all as specified and directed.
S&F 110mm PVC (SWR) EC Connector with lip ring complete all as specified and directed.
S&F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.
M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment all as specified and directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m nean radius, built in cement morter (1:4) complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:3) on wall finished even and smooth without using extra cement with water proof compound as per manufacturer instruction complete all as specified and as directed (Note: WPC shall be measured and paid separately under respective item) on other than fair face of wall complete all as specified and as directed .
M&L for rendering 20mm thick in cement mortar (1:3) on wall finished even and smooth without using extra cement with water proof compound as per manufacturer instruction complete all as specified and as directed (Note: WPC shall be measured and paid separately under respective item). on fair face of wall complete all as specified and as directed .
Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil all as specified and directed.
Material and labour for providing Precast Reinforced Cement Concrete(1:2:4) type B1 using 20 mm graded stone aggregate as in cover slabs set in cement mortar (1:6) including necessary form work complete all as specified and directed.
M&L for Two coats of synthetic enamel paint over a coat of primer, on new concrete surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching and haunching including necessary form work complete all as specified and as directed .
M&L for PCC (1:4:8), type D2 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for reinforced concrete pipes class NP2 , laid and jointed complete with collars 150mm bore complete all as specified and as directed .
M&L for plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate to drain pipes incl forming cradles, packing under and hunching against the sides of pipes, 150mm bore NP2 pipes complete all as specified and as directed
Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore complete all as specified and as directed.
Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade,and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, one Way switch complete all as directed.
All as per item No 96 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete.
All as per item No 96 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.
M & L for Switch piano flush type single pole one way 6 Amp complete all as directed.
M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as directed.
M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as directed.
Supply and fix, BDLC ceiling fans aesthetics stylish with metallic body ring and trims ceiling fan, 1200 mm sweep Ivory / White as per manufacturer's instruction complete all as directed.
M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as directed.
S & F 20W LED fittings decorative Regal batten for LED tube with tube rod lighting fixture with extruded polycarbonate minimum effiency 120 lumen/watt including all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as directed.
S & F 9W LED fittings decorative Regal batten for LED tube with tube rod lighting fixture with extruded polycarbonate minimum effiency 120 lumen/watt including all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as directed.
S & F 6 W mirror light LED fittings decorative Regal batten lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as directed.
S & F of Exhaust fan not less than 250 mm Sweep with louver shutters, High quality engineering plastic, resistant to colour change with anti-static properties exhaust fan AC 230V, 50 Hz comlete with fixing arrangement and connection complete all as directed.
Supply and fix 30W LED 6000K for building security light Including GI pipe 1.00 mtr long(light grade) bracket 32 mm bore including necessary connection from ceiling rose with 3 core .75 sqmm pvc insulated round copper cable fixed with suitable size clamp and nut bolt complete all as directed.
M & L sheet metal enclosure for DBs TPN 4 way double door type with 200amps rated busbar including necessary connection complete all as directed.
M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as directed.
M & L for MCB single pole 6 to 32 Amps 240 V 50 Hz 10kA 'C' series complete all as directed.
M & L for MCB single pole Neutral 6 to 32 Amps 240 V 50 Hz 10kA 'C' series complete all as directed.
M & L for MCB TPN 63 Amps 240 V 50 Hz 10kA 'C' series complete all as directed.
M & L for sub main wiring with two single core PVC insulated cable with Copper conductor unsheathed cable of size 4 sqmm drawn through & including cutting chases in wall with making good the disturbed surfaces with 1:3 cement mortar to match the existing with PVC conduit with 4 sqmm PVC insulated copper wire single core for continuous earthing complete all as directed. Note : Two run 4 Sq mm of cable shall be measured as single run.
M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and revetted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate including testing complete as specified and as shown in electrical plate no 3 of SSR part I.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core cpmplete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 2 core cpmplete all as specified and as directed.
M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :- Punned thickness of sand layer shall be measured and paid to contractor.
M&L for Best quality flyash bricks locally available (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.
Supply and fixing GI protection pipe light grade for cable protection incl all fittings laid in trenches or fixed on pole all as specified for 50 mm dia complete all as specified and as directed.
Horizontal boring below pavement of road, in soft/lose soil for crossing 80 mm size G.I pipe lines including making surface good matching to the existing one or all as specified and directed.
M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in foundation for poles/stay assembly etc including necessary formwork complete all as specified and directed.
M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in coping, benching and haunching including necessary form work complete all as specified and as directed.
Supply, fixing, errecting in trully vertically position steel tubular swaged welded pole complete with cast iron base plate, finial taper plug, bolts, nuts, and screws as specified type 410 SP - 31 (9.0 mtr long) including one primer coat, one under coat, one finishing coat of aluminium paint, marking of pole numbers and making 3 Nos of black colour strip 30 cm wide on equal distance from coping complete all as specified and as directed. Note:- Necessay earthwork / excavation, PCC will be measured and paid under relevent items.
Supply and fixing LED street light fittings on poles of capacity 45 watts, High pressure die cast aluminium, IP 66 Rating, front cover made of toughened Clear Glass, suitable for pole mounting with bracket arm 40mm dia, GI light grade pipe up to 1.4m long, bend to required shape, clamp 40mm x 6mm of required length including nuts & bolts fixed on street poles complete all as specified.
Supply and fix Junction box with terminals of size 155 x 210 x 92mm or nearest higher size made of polycarbonate body with IP 66/67 degree of protection, dust proof, water tight, shock proof, fire retardant, with internally embedded gasket fitted with heat treated bakelite terminals block and PVC glands for cable entry including nut bolts and MS clamps as required complete all as directed.
Material and labour for earthing complete with galvanised earth plate electrode 600 x 600 x 3.15 mm buried directly in ground vertical to a depth not less then 2.25 mtr below ground level with the top edge of earth plate at a depth of not less then 1.5 mtr below normal ground level using GI earth strip in size 32 x 6 mm connecting to test point by means of nuts bolts and washers etc. made including necessary excavation earth work PCC (1:3:6) type C1 using 20 mm graded stone aggregate earth chamber 40 mm thick RCC cover with PCC (1:2:4) type B1 using 20 mm graded stone aggregate 20 mm dia GI medium grade watering pipe and 40 mm for strip, funnel, protection pipe, adequate quantity of common salt, charcoal etc. and connecting complete all as specified and shown in electrical plate No. 3 of MES Sch Part - 1 complete including testing all specified and directed.
M&L Three core 1.5sqmm (nominal area) service wire PVC insulated copper conductor FRLSH/FRLS, multi stranded, unsheathed 1100 volts grade IS-694 marked and from junction box to street light fitting through steel pole with necessary clamps, bolts, etc required for fixing complete including testing all as and directed.
S & F 40mm bore steel water tube, 'medium grade',galvanised, with all fitting and fixed laid in trenches complete all as specified and directed.
S & F 25mm bore steel water tube, 'medium grade',galvanised, with all fitting and fixed laid in trenches complete all as specified and directed.
S&F gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of 40 mm dia complete all as specified and directed.
S&F gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm dia complete all as specified and directed.
M & L for ferrul the existing main water supply pipe line 100 mm bore CI/DI line for branch connection of the internal dia 20 mm complete all as specified and directed.
M&L for brick masonry valve pit with brick in CM (1:6) with 100mm thick PCC work (1:3:6) type C2 from foundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 600x600x600 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS plate cover made out of 3.15mm thick with locking arrangement fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
M/s S A TRADING
FRIENDS CONSTRUCTION
Tirupati Buildcon Pvt. Ltd.
ANSH CONSTRUCTION
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .