Renovation of portion of ACCM Group for functional Nano Fibers Laboratory at AMPRI,Bhopal

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

P/f aluminium fixed partition in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, etc all fittings and fixtures as required and desired by E-in-C.

P/f aluminium door in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, handles, door stopper hinges, L-drop etc all fittings and fixtures as required and desired by E-in-C.

Providing and fixing film in glass section in desired pattern and shade as required by E-in-C

Labour for shifting and cleaning

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment including the cost of chemical emulsion in Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :With Chlorpyriphos/Lindane/ Approved chemical for Termite treatement for pest controll ( Approx area 2150 sqft)

Providing and fixing Granite average thickness 16mm in plateform of size 5Feet x 2 feet with Vertical in pink marble average thickness 16mm and 32inch height sandwitched in double layer by Adlite/ suitable Adhasive including cutting the granite top to hold laboratory sink and outlet in PVC pipe for waste water upto 10 feet long including fitting and fixture all complete and making hole etc. in machinary wall for outlet of waste water

R S TRADERS