IMPROVEMENT/ REPAIR TO EXTERNAL WALL FINISHES, GUNITING WORK IN CERTAIN LOCATIONS INSTALLATIONS INCL COMPOUND WALLS, BOUNDARY WALLS, BUILDINGS, FENCING, PARKING SHEDS, GARAGES ETC IN RESTRICTED AREAS (ZONE B ) UNDER GE(I) RND KANCHANBAGH, HYDERABAD

Amount

Notes for item No 01 to 21 : (i) Material required for white wash, cement base paint distemper, synthetic enamel paint, external weather proof paint internal emulson paint required as per company specificaton shall be brought in sealed pack/ container and kept in office store and shall be issued to the contractor when required as per consumption. (ii) Paint/White wash shall be carried out only after laying neccessary protection covers/ papers to avoid paint splashes on floors. (iii) Distemper/ emulsion / external emulsion/ synthetic enamel/ primer shall only applied with same brand rollers and tools as approved material make. (iv) Colour of paint may vary from building to building as order by GE without any extra cost to the Govt. (v) Weather proof painting on new surfaces and complete removal surfaces shall be done by authorised applicator and guarantee as per CA shall be obtained from applicator.

M&L for Preparation of old plastered surfaces of walls, cornices etc and applying one coat of white washing and all as specified and directed by Engr-in Charge.

All as per item No. 1 here-in-before but on ceiling.

M&L for preparation of old plastered/unplastered surfaces of walls and applying one coat of cement base paint and all as specified and directed by Engr-in Charge.

M&L for preparation of old plastered/unplastered surfaces of walls and applying two coats of cement base paint and all as specified and directed by Engr-in Charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion and all as specified and directed by Engr-in Charge.

M&L for preparation of old plastered surfaces of walls and applying two coats oil bound distemper complete all as directed. MAKE: ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted steel/iron surafces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as directed

M&L for rendering 15mm thick cement plaster on wall in CM (1:4) finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engr-in Charge.

M&L for rendering 10mm thick cement plaster on wall in CM (1:6) finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engr-in Charge.

M&L for rendering 10mm thick cement plaster on ceiling in CM (1:3) finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engr-in Charge.

M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper paint as per manufacturers instructions over a coat of true care wall primer complete all as specified and as directed . Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of new plastered surfaces of walls and applying three coats of white washing on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC (DULUX) Note: Work shall be carried out by authorised applicator only.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant cement primer on walls complete all as specified and directed by Engr-in Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white washing on ceiling complete all as specified and directed.

M&L for Guniting to existing RCC members after removing all dismantling loose concrete & preparations of surface, application of derusting chemical such as Dr FIXIT Rust Remover or equivalent, welding additional bars if found necessary, priming reinforcement bars with a coat of zink primer of coating not less than 40 mic, provision of bonding agent with bonding material like Dr FIXIT Bonding Agent and repair to external RCC structure with slurry tight and strong form work and short creat concrete of mixed 1:3:1 (one part of cement three part of coarse sand and one part of 10mm and down aggregate) of minimum 40mm thickness, curing the same for 14 days all a specified in IS 9012-1978 incl 10 mm thick rendering in CM1:4 finishing surfaces even and smooth matching existing surface complete all as directed.

Removing plant including roots by dismantaling of brick work PCC/RCC including necessary saffolding any type in any location/position i.e roof , parapet wall near pipes etc and applying acid after removing roots for preventing the regrowth and making good of disturbed portion useing PCC 1:2:4 type B0 & 10mm thick plaster in CM 1:3 size of disturbed portion 150 x 150 x 200mm complete all as specified & directed by Engr - in - Charge. Note : Work to be carried out up to 05storey bldg externally.

S&F 2mm thick powder coated stainless steel 304 grade name plate of size 150 x 150 mm with engraved letters (Size of letter nexc 10 cm and Qty nexc 05 nos, as per reqirement at site) and fixed with SS studs on walls including dismantling old existing name plate complete all as specified and directed.

M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

SRI SAI ENTERPRISES

S Anjan Reddy

Venkat Sai Enterprises

ELEVATORS MAINTENANCE ENGINEER WORKS

sri vishnu enterprises

Anjana corporation

SUN LIGHT HOUSE

hari enterprises