Procurement of various type of filter elements for different auxiliaries installed at PH I and PH II, at SGTPS, MPPGCL, Birsinghpu

Dust Proof Ventilator(Breather) for Coal Mill gear box (As per sample)

Suction Oil Filter Element (S S) for LOP of ID,FD&PA Fans for Unit No. 1 (As per Drawing)

Discharge Oil Filter Element (S S) for LOP of ID,FD & PA Fans for Unit No. 1 (As per Drawing)

Suction filter with frame for Scanner Air Fans (As per sample)

Suction filter for Everest blower/Compressor model no. 713 (as per drawing)

Suction filter for Kay blower/Compressor model no. 615 AC (as per drawing)

Suction filter for Kay blower/Compressor model no. 65 AC (as per drawing)

Suction filter for Kay blower/Compressor model no. 53 AC (as per drawing)

SS Wire mesh(Non-Magnetic) Material AISI-316 Fine Mesh(Size 80 Mesh, 40 SWG) Wire Dia.- 0.13mm Wire Mesh Sheet Roll Size: W=1.5 Mtr X L=12Mtr(18m2) Suitable for water application of temperature 160oC & pressure 10 kg/cm2

Suction filter Elements with frame for Conveying Compressor Model 1620WC Specifications:- a)Frame Body material:GI Sheet(20 Guage) b)Filter element fitted in frame :50 mesh for layer I,100 mesh for layer II c) Filter Elements to be covered with steel wire mesh of wire size 2mm and 20mm square check on frame from both side.

Filter element set for Lub oil system of greaves make gear box of 8.5 E-9 Coal Mill (each set consists of 02 elements), Mesh:- 0.008” Upper element: 1 7/8” x 3 ¼” x3 5/8” Lower Element: 1 7/8” x3 ¼” x 3 ½”, Working Pressure: 05 kg/cm2 Material: SS-304 (As per sample)

Filter element set for Lub oil system of greaves make gear box of 8.5 E-9 Coal Mill Element size: 150x75x40, Capacity: 75 LPM Filtration: 100 micron Working Pressure: 05 kg/cm2 Material: SS-304 (As per sample)

Air Breather cum oil filter unit for N2 Panel of Unit#3 Model: FSB-25-BM Material: SS-304 (As per sample)

Suction filter for N2 Panel of Unit#3 HFS-10-06-B-149G Material: SS-304 (As per sample)

Suction Filter With frame for Scanner air fan Flange Size:- 610x610x50 mm Box Size:- 550x550x40 mm Flange MOC:- G.I.18 SWG BODY:- G.I. 20 SWG Filter Media:- S.S 304 MESH 16/SQ INCH & 32/SQ INCH stitch together and pleat in V form No of fold-18 Nos. 4 Nos. hole on flange, Dia. of hole 20mmfor PH-II (01 Set=02 Nos.) (As per sample)

Suction Filter With frame for Seal air fan (As per sample) Flange Size:- 615x615x150 mm Box Size:- 550x550x150 mm Flange MOC:- G.I.18 SWG BODY:- G.I. 20 SWG Filter Media:- S.S 304 50 Mesh & 100 mesh stitch together and pleat in V form No of fold-20 Nos. 4 Nos. hole on flange, Dia. of hole 20 mm, 02 Nos. handle Separator in front side 4 Nos. & back side 3 Nos.

Suction Filter With frame for core air fan Flange Size:- 557x557x150 mm Box Size:- 450x450x150 mm Flange MOC:- G.I.18 SWG BODY:- G.I. 20 SWG Filter Media:- S.S 304 50 Mesh & 100 mesh stitch together and pleat in V form No of fold-18 Nos. 4 Nos. hole on flange, Dia. of hole 18 mm, 02 Nos. handle Separator in front side 4 Nos. & back side 3 Nos. Extra frame with S.S. 304 20 mesh flat screen size 557x557x2 mm Guard in front side (As per sample)

Discharge filter element of ID/FD Fan FFW hydraulic filter steel wire mesh of SS-304 Mesh: 100 micron (As per sample)

Suction Filter Element of ID/FD Fan (As per sample)

Suction Filter Element of PA Fan for reservoir tank 20LPM @ 5 bar pressure steel wire mesh (As per sample)

Suction Filter Assembly for HFO pumps i. Operating temperature -50/150 degree ii. Media- Heavy Furnace Oil

ESP blower Model-1012WC/710WC

Nova Blower, Model-65WC

Non-magnetic SS Shims (Min. width of sheet 360 mm)