Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹36.9 L+₹9.1 L (32.5%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹39.9 L
EMD Value
₹79,800
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
REPAIRS TO JOINERY IN CERTAIN OTM AND MD ACCN AT BAIRAGARH AREA UNDER GE BHOPAL
2023_MES_605536_1
8997/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹79,800
Yes
29 Aug 2023
24 Jun 2023
27 Jul 2023
24 Jun 2023
25 Jul 2023
8 Jul 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down shutters of any description n.exc 1.0 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutters without taking off shutters from the frame complete all as specified and directed. Note: Rates are included making good to disturbed surfaces like plastering and finish as per existing i.e white washing/distempering complete.
Taking down chowkhats or frame exc 1.5 Sqm but nexc 4.00 Sqm with shutters without taking off shutters from the frame complete all as specified and directed.
S&F factory made uPVC white colour three track three panels sliding window with fly proof S.S 304 wire mesh (two nos. glazed & one no. wire mesh panels) made of outer frame 104x45mm and sash 39x58mm both having wall thickness of 2.2 +/- 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 +/- 0.2 mm thick galvanized mild steel section made from cold roll forming process of required length (shape size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, TPE/EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy/SS body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless GI/steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved quality complete all as specified and directed. Notes: (i) Glazed shutters of clear float glass thickness not less than 5 mm and wire mesh shutter same as glass shutter with stainless steel (SS-304) wire meash 0.35 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and no extra payment will be made separalely. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (iii) Window shall be of Make:- NCL Veka/ Prominance/ Duroplast as approved by GE.
S&F of factory made uPVC white colour fixed louvered window with/without exhaust provision made of outer frame 60x55mm having wall thickness of 2.2 +/- 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi chambered frame with necessary mullion brackets of zinc alloy. Outer Frame, Mullion/Transome extruded profiles duly reinforced with 1.20 +/- 0.2 mm thick galvanized mild steel section made from cold roll forming process of required length (shape size according to uPVC profile), TPE/EPDM gasket, fixed louver components, G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, profile of transome/ mullion shall be mitred cut and fixed to frame with necessary mullion brackets of zinc alloy including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved quality complete all as specified and directed. Notes: (i) Louver blades should be of pinheaded glass of thickness not less than 3.55 mm shall also be deemed included in quoted rates and no extra payment will be made separately. (ii) For uPVC frame and mullion/transome extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (iii) Window shall be of Make:- NCL Veka/ Prominance/ Duroplast as approved by GE.
S&F of factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) proof and 900 N (edge) minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. Note: (i) Stainless steel butt hinges and necessary S.S screws shall be included in item. (ii) Door shall be of Make: Rajshri plastiwood /Jain wood Industries/ Goel brothers/ Goyal Industries/ Pioneer timber Chandigarh
S&F of factory made 46mm thick double skin flush pressed steel door with fly mesh shutter and frame for double shutter of approved size of 0.8mm thick GI sheet for shutter and 1.2mm thick GI sheet for conforming to IS:277 with minimum 120 gsm of Zn coating to provide rust resistance, the gap between the sheets shall be filled with honeycomb paper of minimum 150 gsm and provided with stiffeners for tower bolts (2 Nos.) and lock (1 No.) etc. as approved, the outer surfaces shall be finished with pure polyster powder coating (Jotun or equivalent) of thickness not less than 60 micron and wood finish through heat transfer over with and including mortise latch lever lock with handle - SS 304 finish (Make: Dorset/Hettich/Kich), knob lock for internal door - SS 304 finish (Make: Dorset/Hettich/Kich), latch lever lock for internal door - SS 304 finish (Make: Dorset/Hettich/Kich), ball bearing hinges, tower bolt, door stopper, eye viewer, digital door lock - Dorma or equivalent shall be provided complete all as specified and directed. Note :- (i) Material shall be procured by contractor from authorised dealer of OEM. (ii) Door shall be of Make: Tata Pravesh/ Godrej & Boyce/ Madhu Industries as approved by GE.
S&F of 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of 1.25mm thick MS sheet complete all as specified and directed. Make: Godrej & Boyce/ Jangid Engineering, Jaipur/ Madhu Industries/ Aashish Industries as approved by GE.
S&F of 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of 1.25mm thick MS sheet complete all as specified and directed. Make: Godrej & Boyce/ Jangid Engineering, Jaipur/ Madhu Industries/ Aashish Industries as approved by GE.
M&L of cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks and similar work complete all as specified and directed.
S&F for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
S&F of factory made solid wood plastic composite (WPC) door frame 90 x 45mm made from wood plastic composite single extruded process material with density 780 Kg/Cum as per manufacturer instruction and drawing complete all as specified and directed. Make: Accucell/ Dura plast extrusion/ Rajshri Plastiwood/ Sintex Industries as approved by GE.
S&F of factory made 100% solid PVC flush shutter 28 mm thick, made from co-extruded three layer rigid PVC foam sheet (single extruded) with density not less that 600 Kg/Cum outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 Kg/Cum manufactured by an ISO 9001-2015 certified company, door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as per manufacturer instructions and directed. Make: Accucel/ Dura plast extrusion/ Rajshri Plastiwood/ Sintex Industries as approved by GE.
M&L for 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with 0.9 to 1 mm thick lipping/frame to match complete all as specified and directed. Make: Jain wood Industries/ Goel Brothers/ Goyal Industries/ Pioneer Timber Chandigarh as approved by GE.
S&F of factory made 35 mm thick, IInd class hard wood glazed and skelton shutters more than 2 panel, open rebated and prepared to receive glass, gauze, etc. with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) and fixed chowkats complete all as specified and directed. Make: Jain wood Industries/ M/s Goel Brothers,/ M/s Goyal Industries/ M/s Pioneer Timber Chandigarh
S&F of 150 mm stainless steel handles ISI marked, cast type complete all as specified and directed.
S&F of 150 mm stainless steel tower bolts ISI marked, extruded section and fixed complete all as specified and directed.
S&F of 100 mm butt hinges, extruded stainless steel ISI marked complete all as specified and directed.
S&F of 300 mm long stainless steel sliding door bolts with hasp and stapple (bolt type), ISI marked, fancy type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections and fixed complete all as specified and directed.
S&F of 150 mm long aluminium handles, D- type ISI marked, cast type, anodised and fixed complete all as specified and directed.
S&F of 150 mm aluminium anodised barrel tower bolts ISI marked, extruded section and fixed complete all as specified and directed.
S&F of 100 mm butt hinges, ISI marked, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 and fixed complete all as specified and directed.
S&F of 300mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F of 3 mm thick sheet glass ordinary quality and glazing with stainless steel clips including drilling if required and oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed and with tinned tacks or stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness and any size) from steel/ wooden frame complete all as specified and directed.
S&F in repairs 3 mm thick frosted sheet glass ordinary quality and stainless steel clips including drilling if required glazing with oil putty in square n.exc 0.50 Sqm in each panels complete all as specified and directed.
S&F in repairs 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Dismantling of existing steel windows and removing existing hinges by welding and then providing new box type hinges in replacement by welding and refixing the windows in same opening and repainting the existing surface etc at ground floor complete all as specified and directed.
Dismantling of existing steel windows and removing existing hinges by welding and then providing new box type hinges in replacement by welding and refixing the windows in same opening and repainting the existing surface etc at first floor complete all as specified and directed.
Taking down aluminium doors upto 4 Sqm each and re-fixing in same position after carry out necessary repairs including replacing rubber/aluminium beading and jointing cleats, tightening if required including making good existing surfaces complete all as specified and directed. Note: Any aluminium style, rail, frame, floor spring, hydraulic door closer etc; if required to be replaced will be measured and paid seperately under respective items.
M&L for powder coated aluminium sections fabricated work as in doors, windows, partition as per manufacturer instruction including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors,windows or taking down door/window complete all as specified and directed. Note: (i) Rates are inclusive of necessary new fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall and window by silicon gel etc. (ii) Aluminium sections shall be of Make: Hindalco/Jindal/Deco Grill as approved by GE.
M&L for 12mm thick PVC moulded sheet both side with decorative choice lamination, fixed to aluminium door, partitions PVC sheet having density 600 Kg/m3, 3D hologram, printing colour as approved, exterior grade, prelaminated both side with decorative choice lamination, fixed to aluminium door, partitions and similar work complete all as specified and directed. Make: Century Plywood/ Greenply/ Kit ply/ Novapan
S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg aluminium extruded section body and fixed complete all as specified and directed.
M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workwith complete all as specified and directed. Make: Century Plywood/ Greenply/ Kitply/ Novapan
S&F of second class hard wood, plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of cross sectional area exc 13 sq cm and not exc 25 sq cm incl taking down old fillets complete all as specified and directed.
S&F of auto closing concealed hinges, 30mm for half overlay doors and fixed complete all as specified and directed. Make: Godrej/ Hettich or equivalent as approved by GE
M&L for 12mm thick lipping for external teak wood on veneered particle board or block board fixed with nails complete all as specified and directed.
S&F in repairs 40mm long cupboard/kitchen cabinet magnetic catcher fixed with nuts, screw and washer complete all as specified and directed.
Welding in repairs n.exc 2.5cm in length thickness of metal to be welded n. exc 6mm thick complete all as specified and directed.
Welding in repairs exc 2.5cm and n.exc 5cm in length thickness of metal to be welded n. exc 6mm thick complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc 40 Sqcm and over in section, in any posotion for unframed works complete all as specified and directed.
S&F of mild steel angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
S&F of pre-painted galvalume aluminum zinc coating GI Based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 16-18 mm thick granite stone work (any type) machine cut as on cooking platform, floors and similar work with and including 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcuing grinding and polishing complete all as specified and directed.
Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 450 x 300mm x 7mm thick on vertical surface such as dados etc; set and jointed over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.
M&L for 15 mm thick rendering on brick or concrete surface in CM 1: 6 finishing the surfaces fair and even without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of exterior acrylic paint on walls over a coat of wall primer complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.
M&L for applying 3mm thick wall care putty on walls, finished even and smooth complete all as specified and directed.
S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate and fixed complete all as specified and directed.
S&F of floor door stopper 150mm long of aluminium alloy body and tonge, anodised, with hard drawn steel spring and fixed complete all as specified and diected.
S&F in repairs brass mortice latch lock 4 levers vertical type size 100mm and fixed complete all as specified and directed.
S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs aluminium extruded body door closer hydrulically regulated, designation no 3 universal type, suitable for door shutter of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F in repairs stainless steel 25 mm dia drapery curtain rod with fancy type bracket and fixed complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 62710.00
M/S Shanti Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .