PROVN OF CERTAIN SANCTIONED AND MINOR WORKS AT AFS THANJAVUR

Amount

Surface excavation 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L Plain cement concrete in foundation (1:4:8) Type D2 using 40 mm graded stone aggregate as in foundation and filling mass filling all as specified and as directed.

Returning, filling in incl spreading, levelling, watering and well ramming in layers nexc 25cm with soil complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc 500m and depositing where directed complete all as specified and as directed.

Filling under floors by earth obtianed from excavation to a distance including spreading,levelling & ramming excavated earth in layers n.exc 25 cm thick all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces all as specified and as directed.

M&L MS TMT bars 10mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and as directed.

Description all as per srl item No 08 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders bar etc including other works all as specified and as directed.

M&L RCC nominal Mix (using 20mm graded stone aggregate) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete all as specified and as directed.

M&L Brickwork with fly ash brick subclass B’ old size bricks, straight or curved on plan exc 6m mean radius built in in C M 1:6 complete all as specified and directed.

M&L Formwork to sides of columns square triangular or rectangular in section rough finish surface of concrete flat all as specified and as directed.

M&L RCC 1:1:2 Nominal Mix (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts all as specified and as directed.

M&L RCC 1:1:2 Nominal Mix (using 20mm graded agg) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L half Brickwork with subclass B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile metre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and as directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F mild steel butt hinges medium weight cold rolled and fixed in position of 100mm long all as specified and as directed.

S&F aluminium handle 100 mm cast type anodised complete all as specified and as directed.

M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing fixing with louvers in squares n exc 0.5 sq. m in each pane all as specified and as directed.

M&L preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L rendering, 15 mm thick external plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces and finishing fair and even without using extra cement mixed with integral water proofing compound all as per manufacturer's instruction all as specified and as directed. Note : Supply of WPC will be measured and paid seperately.

M&L 10 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L preparation on newly plastered external wall surface and applying two coat cement base paint over a coat of primer complete all as specified and as directed.

M&L Preparing of new plastered surfaces walls and applying two coats of oil bound distemper over priming plastered & other surfaces with alkali-resistant priming paint complete all as specified and as directed.

M&L Preparing of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles and applying one coat of bituminous primer @ 200 gms per sqm and then laying 3 mm thick APP modified bituminous membrane weighing not less than 3.50 kg/sqm reinforced weighing not less than 160 gms/sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints with CM 1:3 mixed with water proofing chemical as per manufacturer's instructions and cured well before laying membrane applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces etc complete all as specified and as directed.

M&L hard core gauge n.exc 63mm broken stone deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and as directed.

M&L Non skid coloured ceremic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L glazed ceramic coloured tiles on vertical surfaces including 10 mm thick in CM 1:3, as backing coat set and joints cement slurry and jointed in white cement and pigments all as specified and directed.

M&L plain cement concrete 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified and as directed.

S&F Vitreous china wash down water closet (Pedestal pattern) , white in colour including fixing bolts, connection to drain and to flushing pipe, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified.

S&F Vitreous China full stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F Viterous china wash hand basin white/coloured flat back size 630x450mm including brackets and waste pipe coupling fixed in position complete all as specified and as directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and as directed. .

S&F 15mm dia bib tabs fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down with pipe complete all as specified and as directed.

S&F 15mm dia pillar tap fancy type cast copper alloy with capstan head chromium plated screwed to iron pipe complete all as specified & directed.

S&F 15mm dia push tap for urinal cast copper chromium plated alloy with capastan head chromium plated screwed to iron pipe complete all as specified & directed.

S&F 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long complete all as specified.

S&F 100 mm dia PVC (SWR) floor trap, plain with grating having 75mm diameter of outlet including jointing with solvent cement complete all as specified.

S&F PVC connection of 45cm long 15mm dia and fixed in position complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm dia all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia all as specified and as directed.

Supplying and laying CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in walls/ceiling or laying in floors complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 1000 ltr capacity complete all as specified and directed.

Supplying and laying CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in walls/ceiling or laying in floors complete all as specified and as directed.

M & L precast cement concrete block masonry with solid blocks of type C1 1:3:6 (using 20mm graded stone aggregate) exc 10 cm in width and set and jointed in C M 1:6 complete all as specified and directed.

M&L 150mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150mm bore complete all as specified and directed.

M&L Plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping/benching including necessary form work complete all as specified and directed.

M&L Precast reinforced cement concrete 1:2:4 type B1using 20mm graded stone aggregate as in cover slab set in cement mortar 1:4 complete all as specified and directed. NOTE: Reinforcement shall be measured and paid separately.

M&L Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L 25 user capacity on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for conventional type 10 user capacity (except filter bed) complete all as secified and as directed.

Supply, laying and testing service connection cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core including with end termination sleeves with suitable lugs, thimble, nut-bolts etc complete connection from existing Source complete all as specified and as directed.

M&L point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS) in including PVC rigid non metallic 25 mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cap washer including size 1.5 sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and directed.

Description all as per item No 64 here-in-before but for one ceiling fan / Exhaust fan point, controlled by one way switches 5/6 Amps complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/lsolators after complete all as specified and as directed.

S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed

Supply and fixing of LUMILINE PLUS wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

Supply and fixing of LUMILINE PLUS wall mounted LED Batten 10 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

S&F exhaust fan steel body AC single phase 230volt of size 300mm sweep with blades, frames and louvers complete all as specified and as directed.

Cutting existing steel tubing of size 25mm bore for alterations or additions (each cut measured) done in position without taking down complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lenghtening screw on pipe to form connector) done in position without taking down complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

S & F wall/trenches GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc for 25mm bore of pipe complete all as specified and as directed.

S & F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for 25mm bore of pipe complete all as specified and as directed.

Excavation over area exc 1.5 m depth but n. exc. 3.0 m in hard/dense soil complete all as specified and as directed.

M& L Brickwork with subclass ‘B’ bricks, in one and half brisks thick honey comb walling ,built in cm 1:4 complete all as specied and as directed.

M& L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar1:4 complete all as specied and as directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete inner and outer surfaces with CM 1:4 complete all as specied and as directed.

M & L PCC (1:2:4) type B-0 (12.5 mm graded stone aggregate) for pcc bend complete.

Use and waste of Curved Formwork to slab of soakwell all as specified and directed.

M&L for broken stone or boulders loose filling with aggte of gauge 80 to 150 mm in soakage pits, soakage wells for back filling complete all as specified and as directed.

S & F Cast iron rainwater socketed pipes 150mm dia with cement joints, without ears fitting complete all as specified and as directed.

S & F AC vent pipes of 80 mm dia and fittings complete all as specified and as directed.

S & F AC vent Cowl of 80 mm dia and fittings complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F rolled mild steel sections as in grill, grating, & ladders etc conforming to Fe 290.(Gde-E-165) quality A complete all as specified and as directed.

M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing, granite slab edge with mirror polishing complete all as specified and as directed.

Rounding (chamfering) to edge of marble/granite slab edge with mirror polishing such complete all as specified as directed.

M&L 75mm thick PCC 1:4:8 type D2 subbase complete all as specified and as direted.

M&L non skid ceramic colored tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed.

M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

Excavation post holes in hard / dense soil not exc. 0.5 cum and removing surplus soil to a distance not exc. 50 mtr and making good the surface on hard/dense soil complete all as specified and as directed.

S&F roof truss( framed) trussed purlins including distance pieces , cleats etc of Fe 410-w (Grade E-250 ) quality - A complete all as specified and as directed

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eves gutter etc fixed with self tapping screws complete all as specified and as directed.

M&L mild steel framed work such as posts, railing and fencing work and similar work to conforming to Fe-410-0 or Fe-310-0.all as specified and as directed.

Supply & fix flat iron as in fillets for securing wiremesh including necessary drilling holes for bolts and welding confirming to Fe-310 all as specified and as directed.

Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 all as specified and as directed.

Supply only screw bolts 10mm dia machine made with hexagonal or square head at one end screwed the other or screwed both ends to be fitted with washers & one hexagonal or square not exc 150mm long all as specified and as directed.

Supply, Laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm 4 core with all fixing & connecting accessories complete all as specified.

Supply, Laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm 2 core with all fixing & connecting accessories complete all as specified.

M&L Plain Cement Concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in coping, bed block etc including necessary form work complete all as directed.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable or for pole etc complete all as specified and as directed. Note :- Mechanical excavation is not allowed in this Stn only manual excavation allowed.

Description all as per item Srl item No 107 here-in-before but depth exceeding 1.5 metre and not exceeding 3 metre complete all as specified and as directed.

M&L for HDPE Double Wall Corrugated pipe of bore size 32mm dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to pole /wall with suitable clamps for cable protection complete for street light pole to pole cable etc all as specified and directed.

M&L 2 run of 1.5 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100 volts grade with stranded copper conductor including one run of 1.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to Junction box to street light with and including 20 mm dia PVC rigid non- metallic conduit including flexible PVC pipe at starting and finishing point complete all as specified and as directed. NOTE : (i) Two run of wiring cable alongwith one run of earth wire and one run of PVC rigid non metallic conduit shall be measured as one length).

Supply and errect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) and street light bracket of 32 mm dia gi pipe length minimum1.2 meter with clamp and nut bolts including one primer coat and two coats of aluminium paint over a coat all as specified and directed. Note : Necessary excavation and earth work, PCC foundation, coping etc. shall be measured and paid separately vide relevant items of this schedule.

Supply and fix in repairs 60 watt LED street light luminaire with aesthetically designed die cast aluminium housing, power factor of the electronic driver, poly carbonate cover, impact resistant fixture for driver and LEDs, IK 05 impact resistance specifications, IP66 ingress protection is perfect for secondary roadways and pathways complete all as directed..

Supply and fix in repairs 35 watt LED street light luminaire with aesthetically designed die cast aluminium housing, power factor of the electronic driver, poly carbonate cover, impact resistant fixture for driver and LEDs, IK 05 impact resistance specifications, IP66 ingress protection is perfect for secondary roadways and pathways complete all as directed..

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including with fixing arrangement and connection complete all as directed.

Supply & fix PVC synthetic ( Thermoplastic polystyrene) street light junction boxes of suitable size to accommodate and including 63A 3 ph connector block and MCB SP 5amps with provn of incoming/ outgoing cable entryWith 2 sets of suitable size of clamps/bolt & nuts and fixed to poles.

Supply & Fix street Light Timer panel digital type (24 Hrs) upto 6KW rating suitable for 3Ph 415 Volt AC supply complete with Auto/ manual option with Contactor, Protection MCB including with fixing arrangement with PCC and all incomming and outgoing cable connection complete all as specified and as directed.

Supply and fix in replacement hi wall split units indoor/outdoor complete with all connected standard accessories cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 of capacity 2 TR complete all as specified and directed.

Supply & Fix Single pole and neutral enclosure socket (modular type) complete with one single pole mini protection MCB 20 Amp rating complete all as specified and as directed.

M&L for sub main wiring with 2 run of 4 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20 mm dia PVC rigid non- metallic conduit complete all as specified and as directed.

Supply anf fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 to 250 V with output voltage stabilized at 230V with accuracy of +\- 2.5% and of capacity 4KVA complete all as specified and as directed.

Supply, installed and testing of AC timer set unit suitable for existing installed single AC of capacity upto 2 Ton, including with contactor have single Phase 230Volt AC( +/- 10%),heavy duty relay not less than 30Amp,LCD Display Parameters,Auto /Manual facility for AC's, wall mounting fixing type, Timer setting 0-24hrs including with complete connection wiring from each stabilizer to Timer and timer to each AC complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete Casing and capping/concealed in wall / roof and including modular flush metal boxes with cover and frame suitable for modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour for one wall mounted / exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed

M&L switch modular 1 way 6 amps 1 module complete all as specified and as directed

S&F monoblock booster pumpset of capacity 2.0 HP with electric and water connection and necessary foundation work complete all as specified and as directed.

S&F monoblock booster pumpset of capacity 1.5 HP with electric and water connection and necessary foundation work complete all as specified and as directed.

M&L UPVC pipe line with all fittings, laid in trenches fixed to wall of size 50mm dia and connection with existing lines with suitable bend, reducer etc as required accessories including testing complete all as specified and as directed.

S&F of UPVC ball valve of size 50mm dia complete all as specified and as directed.

UNIQUE INDIA CONSTRUCTIONS (BID ID -3478908)

NLK Construction (BID ID -3479022)

M B JAYAVEL (BID ID -3478669)

MONISH CONSTRUCTIONS (BID ID -3478994)