Improvement to link drain Marilo drainage cut from rd 00km to 1.50km, Dahalpur drainage cut from RD 00km to 3.00km, Pahana drainage cut from RD 00km to RD 1.20km and Udayagiri drainage cut from RD 00km to 1.50km Baghuni drainage System

Earth work in excavation of drain both in dry and wet conditions by mechanical means in all kind of soil including stoney earth, gravel moorum mixed with all leads, lifts and delifts, dewatering including trimming of slopes and bed to design section and depositing the excavated materials to the spoil banks or any other approved place including leveling and rough dressing for formation of embankment as per the specification and design with cost of hire charges of all machineries T & P ,operations maintenance cost with all leads, lifts and delifts etc complete including taxes, labour cess T& P etc . complete with all cost incidental to the work as per the drawing specification and direction of the Engineer-in-charge. (Measurement to be taken on initial and final level of sections) Bed width within 8.00mtr.

Earthwork in excavation of foundation of structure by mechanical means in all kind of soil in wet & dry condition, shoring shuttering, propping bullahs, dewatering the foundation including dressing, leveling, ramming the foundation bed & sides with pneumatic rammers/fuel operated compactors and removing the excavated materials with all leads, lifts and delifts away from worksite & depositing the excess materials in spoil banks or any other specified places by manual/mechanical means etc. complete with all cost, conveyance and T&P as per direction of the Engineer-in-charge.

Earth work in ordinary soil for dismantling coffer dam/diversion road by mechanical means and depositing the dismantling materials away from the site at suitable place with all lead, lifts & delifts for all heights and properly prepared surface including breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30 m depths with cost of labour charges conveyance & other taxes etc complete as per drawing, design and specification as directed by Engineer-in-charge.

Filling in foundation and plinth with sand including watering and ramming including cost of all material, labour, royalty and T&P, cess required for the work complete as per the direction of the Engineer-in -charge.

Providing and laying Cement concrete M 15 in approved surface using 40 mm down graded hard granite well graded crusher broken stone aggregates free from weathered skin surface and any other deleterious materials, using sharp sand of approved grading and quality conforming to the specification, using water of approved quality and using cement as per approved specifications with all leads, lifts and delifts and transportation by mechanical/manual means including carriage, royalty, cess and taxes of all materials, mixing the ingredient in a mechanical mixer, vibrator of concrete by mechanical means, supplying T&P, watering, curing including cost of carriage of water, mobilization and demobilization of men & machineries etc including quality control testing charges as per approved drawing and specifications and direction of the Engineer-in -charge.

Providing and placing in position Reinforced Cement concrete M 25 grade with crusher broken hard granite aggregate 20 mm downgraded of approved quality free from weathered skin surface and any other deleterious materials clean coarse sand inclusive of cost,carriage, royalty,cess and taxes of all materials with cost of labour and T&P to mixing yard ,mixing by concrete mixture, carrying hoisting and placing in position for all heights and compaction with vibrators,curing etc.complete in all respect inclusive of all general and incidental charges,dewatering etc complete with maintenance and haul road etc including quality control testing charges complete as per the direction of the Engineer-in-charge. (excluding cost of HYSD bars).

Providing and laying Cement concrete M 20 in approved surface using 20 mm down graded hard granite well graded crusher broken stone aggregates free from weathered skin surface and any other deleterious materials, using sharp sand of approved grading and quality conforming to the specification, using water of approved quality and using cement as per approved specifications with all leads, lifts and delifts and transportation by mechanical/manual means including carriage, royalty, cess and taxes of all materials, mixing the ingredient in a mechanical mixer, vibrator of concrete by mechanical means, supplying T&P, watering, curing including cost of carriage of water, mobilization and demobilization of men & machineries etc including quality control testing charges as per approved drawing and specifications and direction of the Engineer-in -charge.

Providing formwork for concrete with F-1 finish for upstream faces of dam ,spillway, glacis of barrages, unexposed surface of foundation, block joints and all irrigation structures etc. with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour, materials, cess, transportation and T&P complete as directed by the Engineer in Charge.

Rigid and smooth centering shuttering for RCC work including false work and dismantling them after casting including all labours ,cess, cost of all materials and hire charges of wood etc. complete as directed by Engineer-in-charge.

Supplying, straightening, cutting, bending, binding the reinforcement steel bars of different diameters conforming to I.S.1786 and I.S 432 of all diameters, tying the grills in position at all heights including cost of rod, binding wire 18 to 20 gauge with cost, conveyance,cess, taxes of all materials including chairs, dowel, benches, lapping, wastage & welding wherever necessary with all leads, lifts & delifts including quality control testing charges of uncoated HYSD bar with cost of labour T&P required for the work etc. complete as per the design, specification & direction of the Engineer-in-Charge.