SPECIAL REPAIRS TO BLDG NO T-17 AND T-33 (OTM ACCN) AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position complete all as specified and directed.

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span bu not exceeding 8.00 m span and removimg from site complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

Dismantling of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even without using extra cement,complete all as specified and directed.

M & L 10mm thick cement plastering in cement mortar 1:6 finishing even and fair without using extra cement.

M&L for Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl use and waste of all necessary form work complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Preparing new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer.

M & L for preparation of new plastered surface or unplastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coat of Oil Bound Distemper over a coat of Chalk whitening / wall care putty with smooth surface complete all as specifie and directed

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frame) n exc 1.5 sqm each and removing from site.

M&L for Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete. Make: Manufactured by M/S TEE PEE Enterprises, Amritsar (Pb) / PD Industries Panchkula(HR)/ M/S Laxmi Welding Works, Ambala Cantt/ M/S Ram Fabricators Pvt Ltd, Panchkula or equivalent as approved by GE Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

Framed work Fe-410- W(Gde- E-250) quality- B as in chowkats of doors or gates of angle or other section with gusset plates, rails, braces, hold fasts etc complete all as specified and as directed

S & F 35mm thick plain framed (Factory made) pannelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm BWP commercial ply or 12mm thick vereered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003(Part-I) complete all as specified and direced.

S & F 35mm thick glazed and skelton shutters of 1st class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size

Mild steel barrel tower bolts 200 mm long , stove enamelled black, with bright bolt and fixed

Mild steel pressed handles oval type stove enamalled black 125mm size complete

Mild steel sliding door bolts, 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

MS butt hinges 100mm long cold rolled MS medium weight complete all as specified and as directed.

S & F M/S 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer.

Roughening of concrete surfaces by picking, sweaping clean with water and removing all loose dirt etc.

M & L 50 mm thick Cement cincrete 1:3:6 type C-2 using 20mm graded crushed stone agg as in plinth protection finishing surface w/o using extra cement.

Purpose made holding down boilts 12 mm dia with nuts and washers complete

S&F Anodised aluminium snap grid frame work of size 605x605 mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in Charge.

S& F 10mm PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium as per specification and drawing complete all as specified and directed by Engr-in Charge. Note :- Aluminium Snap Grid with hanger will paid separately.

S & F Machine cut Kota stone slab flooring 20 to 25mm thick laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost for the following.

One light/fan point controlled by one one way switch

One socket outlet point 6A on independent board

One socket outlet point 6A on same board

S&F Modular Switch 1 way 6A 1 module complete all specified and as directed by the Engineer-in-Charge.

S&F Modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed by the Engineer-in-Charge.

S&F Modular fan regulator 120 W, 2 module

Material and labour for angualr type lamp holder. PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting. Complete all as specified and directed.

Supply and fix LED Lamp LED 9 W Ball Lamp complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP54 protection complete all as specefied and directed. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth

Supply and fix in replacement of MCB SP up to 6-32 A 10 KA 'B' curve complete all specified and as directed by the Engineer-in-Charge

S & F MCB. SPN 40 A 10 KA 'B' curve complete all specified and as directed by the Engineer in Charge

Supply & fix Energy saving LED light fitting 1*20 Watt 230 volts. Decorative ultra sim linear LED lighting fixture with extruded polycabonate envionmental frindly energy efficient ready to use pack with electronic drive and with best quality diffuser high lumen output 2.5 KV voltage surge protection PF 0.98 THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable

Supply and fixing Bulk head fitting 1x10 Watt LED type complete all as specified and directed .

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 16 Sqmm 2 Core all as specified & directed by Engr-in-Charge.

Excavation in trenches in soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and not exceeding 10Sqm on plan and getting out complete all as specified.

Returning filling in including spreading, levelling,watering and well ramming, in layers not exceeding 25 cm thick each excavated soil in trenches after the pipes have been laid and tested complete as in soft/loose soil complete all as specified.

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not Rm exceeding 1.5m above the sraring point complete all as specified.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

M &L for laying of well burnt Brick 23 cmx11.5cmx7.5 cm for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1:3:6 type C1, and 50mm thick RCC 1:2:4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed.

M/s Anil Kumar and co.

Arneja Builders