REPAIR TO CERTAIN BLACK TOP ROAD, PATH and HARD STANDING AT SEWAR FORT and PARADE GROUND BHARATPUR UNDER GE BHARATPUR

Amount

M&L for Scarifying, Picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm, n.exc 50mm deep and removing n.exc 250m complete all as specified and directed.

M&L for Scarifying, Picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm, exc 50mm and n.exc 100mm deep and removing n.exc 250m complete all as specified and directed.

M&L 75 mm thick (compacted thickness) WBM for disturbed portion of road (63 to 40mm size) with coarse aggregate (lime/sand stone, flint or quartzite) of grading 2 spread, rolled and consolidated to required gradient, camber and super elevation required to match with existing surface rolled with 8-10 ton power roller complete all as specified and directed.

M&L 75 mm thick (compacted thickness) WBM for disturbed portion of road except material (using material retreived from Srl No 1 & 2 above), rolled and consolidated to required gradient, camber and super elevation required to match with existing surface rolled with 8-10 ton power roller complete all as specified and directed.

Preparing of existing black top surface by brushing with wire brushes for removing caked mud and bushes near road side etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & applying evenly a priming tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm complete all as specified and directed.

Preparing to WBM surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & applying evenly a priming tack coat of paving bitumen VG-10 @ 10 Kg per 10 Sqm complete all as specefied and directed.

M&L premix bitumen macadam with binder content 4% of bitumen (paving bitumen VG -30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 10 tonne power roller complete all as specified and directed.

M&L for bituminous concrete design mix 30mm consolidate thickness using graded crushed stone aggregate premixed with 5.5% binder content paving bitumen VG-30 by weight of total mix laid with hydrostatic paver finisher with sensor and hydraulic control rolled and compacted with 8 to 12 tonne power roller to be followed by smooth wheel pneumatic roller having a tyre pressure 7kg/Sqcm finished by final rolling with 8-10 tonne tandem roller required camber and gradient complete all as specified and directed. Notes for item No 7 & 8 :- (i) Bituminous concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of hydrostatic paver finisher with sensor control. (ii) Filler for bituminous concrete shall be stone dust @ 2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items. (iv) Work shall be executed as per design mix approved by GE.

Removing excavated soil / material to a distance exc 250m but n.exc 500m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed.

S&F cat eyes solar reflective type of metal body alloy size 100 x 100 x 20mm with PAMA striplens reflector of model No DA 972 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125x125X25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed.

M&L for applying 2.5mm thick thermoplastic road marking compound of white/yellow of approved make, shade, for road marking of any width & girth & painting lines, dashes, arrows etc n.exc 10cm wide on bitumen road/pavement & on concrete surfaces using hot processor plant including removing old paint by paint remover of burning of blow lamps & cleaning with scrapers for removing all durt /dust & other foreign matters at site & managing traffic control etc complete all as specified and directed Make: Apcotrack of Asian or equivalent in make as specified in appendix 'A' to PS

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomeric 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fix in repair of CONVAX MIRROR circular of size 1000mm dia made with ABS Body, Lense/Mirror with unbreakable poly carbonate fixed with clamp complete all as specified and directed MODEL: JP-CM of JAYASHRI POLYMORES, Chennai or equivalent in make as specified in appendix 'A' to PS.

M&L for Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 80mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber moulded, laid in required colour & pattern over and including 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and direction. Note :cushion shall be measured and paid separately.

M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, bed of pipe etc complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Re-inforced concrete) set in cement mortar 150mm dia of pipe including taking out form trences if requred all as specified and directed.

M&L for 150mm internal dia Reinforced concrete pipe, class NP-2, laid and jointed complete with collars complete all as specified and directed.

M&L for 600mm internal dia Reinforced concrete pipe, class NP-2, laid and jointed complete with collars complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Demolition of brick work or stone/bolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6mtr mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:4) on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement sand mortar 1:4 and finished fair even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 20mm graded aggregate in mass concrerte for hume pipe including filling surrounding of hume pipe complete all as specified and directed.

Providing and fixing Aluminum backed flexible prismatic sheeting, consisting of yellow/black coloured flexible prismatic sheet with non-metallic prismatic lens as retro reflective elements and confirming to ASTM D4946 Type VI specifications for reboundable retro reflective sheeting. The prismatic sheet shall be laminated at the back with 50micron aluminum Foil sensitive adhesive and liner with screen printed arrow/slant pattern in yellow/black colour. The AFP shall be applied with adhesive, the edge of the sheeting shall be sealed all around with epoxy based structural adhesive and shall be extremely resistant to pill-off complete all as specified and direction.

AMIT RISHABH BUILDERS PRIVATE LIMITED

BHARADWAJ BROTHERS