Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | S A S NAGAR | PUNJAB | 160059 | ₹1.2 Cr | L-1 | Accepted-AOC Being L-1 |
| 2 | L-2₹1.3 Cr+₹4.0 L (3.33%)Rejected-AOC HM 324 PHASE IX SAS NAGAR MOHALI PB | ₹1.3 Cr+₹4.0 L (3.33%) | L-2 | Rejected-AOC Other than L-1 |
| 3 | L-3₹1.3 Cr+₹12.0 L (9.92%)Rejected-AOC FLAT NO 203 GH 5 SECTOR 27 PANCHKULA 134116 HRY | PANCHKULA | HARYANA | 134116 | ₹1.3 Cr+₹12.0 L (9.92%) | L-3 | Rejected-AOC Other than L-1 |
| 4 | L-4₹1.5 Cr+₹31.3 L (25.9%)Rejected-AOC 164 SECTOR 21A CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹1.5 Cr+₹31.3 L (25.9%) | L-4 | Rejected-AOC Other than L-1 |
| Sl No | Description | Qty | Unit | B N FRIENDS AND CO L3 | M/S MATLOOB AHMED L2 | MS SACHDEVA BUILDERS L4 | Baba Engineers and Contractors L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and as directed by Engineer-in-Charge. | 110 | EACH | 250 ₹27,500 | 300 ₹33,000 | 125 ₹13,750 | 60 ₹6,600 Lowest |
| 2.00 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and as directed by Engineer-in-Charge. | 65 | EACH | 300 ₹19,500 | 300 ₹19,500 | 140 ₹9,100 | 100 ₹6,500 Lowest |
| 3.00 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each, including stacking at directed for refixing and/ or removing to store, complete all as specified and as directed by Engineer-in-Charge. | 7 | EACH LEAF | 100 ₹700 Lowest | 100 ₹700 Lowest | 200 ₹1,400 | 100 ₹700 Lowest |
| 4.00 | S&F for factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., with and including filling hollow frame with plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregates) complete all as specified and as directed by Engineer-in-Charge. | 35 | RM | 460 ₹16,100 | 510 ₹17,850 | 525 ₹18,375 | 380 ₹13,300 Lowest |
| 5.00 | S&F for factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., with and including filling hollow frame with plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregates) complete all as specified and as directed by Engineer-in-Charge. | 67 | RM | 510 ₹34,170 | 540 ₹36,180 | 570 ₹38,190 | 425 ₹28,475 Lowest |
| 6.00 | S&F 35 mm thick Flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge. | 40 | SQM | 2,500 ₹1,00,000 | 1,650 ₹66,000 | 2,500 ₹1,00,000 | 1,600 ₹64,000 Lowest |
| 7.00 | M&L for second class hardwood, Glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. | 29 | SQM | 2,200 ₹63,800 | 1,850 ₹53,650 Lowest | 2,700 ₹78,300 | 2,200 ₹63,800 |
| 8.00 | Factory made box type steel windows with pressed steel frame minimum 1.25mm thick complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles (minimum One for each shuter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276 (R), Sheet No. 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-charge.
Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4. 3/4, 4(R)/4.
(ii) Mode of measurement Unit will be for the complete window except Glass/ Gauge but including fittings, ISI marked iron mongery complete as per TD.
(iii) The PCC back filling in chowkhat of window, Grills, Sheet glass and wire gauge will be measured and paid separately against respective items. | 110 | SQM | 3,000 ₹3,30,000 | 2,400 ₹2,64,000 Lowest | 3,200 ₹3,52,000 | 2,500 ₹2,75,000 |
| 9.00 | All as per Serial item No. 8.00 here-in-before but with glazing bars. | 110 | SQM | 3,000 ₹3,30,000 | 2,250 ₹2,47,500 Lowest | 3,000 ₹3,30,000 | 2,500 ₹2,75,000 |
| 10.00 | S&F for factory made steel windows (Box type), fixed type, dovetailed or welded etc., including one shop coat of red oxide zinc chrome primer, fixed as including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified and as directed by Engineer-in-Charge. | 11.4 | SQM | 2,000 ₹22,800 | 1,800 ₹20,520 Lowest | 2,500 ₹28,500 | 2,400 ₹27,360 |
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
30 Sept 2025, 6:00 pmClosed
CWE Chandimandir
HQ CWE Chandimandir, PIN-134107
CWE/CHD-74/2025-26 SPECIAL REPAIR TO BLDG NO P-69 (MTF) AND P-49 AT HALLOMAJRA UNDER GE CHANDIGARH
2025_MES_727836_1
CWE/CHD-74/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE Chandigarh
Class B, Cate a(i)
9 documents required · 9 mandatory
₹1,000
GE Chandigarh
₹2.2 L
21 Nov 2025
26 Aug 2025
7 Oct 2025
26 Aug 2025
30 Sept 2025
16 Sept 2025
26 Aug 2025 - 2 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .